ETSI TS 122 401-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) TISPAN Videotelephony over NGN Service Description《数字蜂窝_1.pdf

上传人:progressking105 文档编号:740609 上传时间:2019-01-11 格式:PDF 页数:17 大小:86.37KB
下载 相关 举报
ETSI TS 122 401-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) TISPAN Videotelephony over NGN Service Description《数字蜂窝_1.pdf_第1页
第1页 / 共17页
ETSI TS 122 401-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) TISPAN Videotelephony over NGN Service Description《数字蜂窝_1.pdf_第2页
第2页 / 共17页
ETSI TS 122 401-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) TISPAN Videotelephony over NGN Service Description《数字蜂窝_1.pdf_第3页
第3页 / 共17页
ETSI TS 122 401-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) TISPAN Videotelephony over NGN Service Description《数字蜂窝_1.pdf_第4页
第4页 / 共17页
ETSI TS 122 401-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) TISPAN Videotelephony over NGN Service Description《数字蜂窝_1.pdf_第5页
第5页 / 共17页
点击查看更多>>
资源描述

1、 ETSI TS 122 401 V8.0.0 (2008-10)Technical Specification Digital cellular telecommunications system (Phase 2+);Universal Mobile Telecommunications System (UMTS);TISPAN;Videotelephony over NGN Service Description (3GPP TS 22.401 version 8.0.0 Release 8)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETS

2、I TS 122 401 V8.0.0 (2008-10) 1 3GPP TS 22.401 version 8.0.0 Release 8 Reference RTS/TSGS-0122401v800 Keywords GSM, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucrat

3、if enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference i

4、n contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the

5、document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.e

6、tsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. All rights reserved. DECTTM, PLUGTESTS

7、TM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 122 401 V8.0.0 (2008-10) 2 3GPP TS 22.401 version

8、8.0.0 Release 8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intel

9、lectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no invest

10、igation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specifi

11、cation (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverable

12、s. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. ETSI ETSI TS 122 401 V8.0.0 (2008-10) 3 3GPP TS 22.401 version 8.0.0 Release 8 Contents Intellectual Property Rights2 Foreword.2 Foreword.5 Introduction 5 1 Scope 6 2 Refere

13、nces 6 3 Definitions and abbreviations.6 3.1 Definitions6 3.2 Abbreviations .7 4 Service description .7 5 Procedures 7 5.1 General service requirements .7 5.2 Registration, provisioning, activation, invocation and withdrawal 8 5.3 Charging and accounting8 6 Quality of service requirements .8 6.1 Gen

14、eral .8 6.2 Video quality8 6.3 Audio quality8 7 Interworking considerations.9 7.1 General .9 7.2 Interworking with emulation services 9 8 Interactions with PSTN/ISDN simulation services 9 8.1 General .9 8.2 Mandatory services.9 8.2.1 Originating Identification Presentation (OIP).9 8.2.2 Originating

15、Identification Restriction (OIR).9 8.2.3 Terminating Identification Presentation (TIP)9 8.2.4 Terminating Identification Restriction (TIR)9 8.2.5 Malicious Communication Identification (MCID) .9 8.2.6 Anonymous Communication Rejection (ACR) 9 8.3 Recommended Services .10 8.3.1 Communication DIVersio

16、n (CDIV) .10 8.3.2 Communication Waiting (CW).10 8.3.3 Communication HOLD (HOLD)10 8.3.4 Communication Baring (CB)10 8.3.5 Communication Completion on Busy Subscriber (CCBS).10 8.3.6 Message Waiting Indication (MWI) .10 8.4 Optional services 10 8.4.1 CONFerence (CONF).10 8.4.2 Advice of Charge (AoC)

17、.10 8.4.3 Explicit Communication Transfer (ECT) .11 8.4.4 Reverse charging 11 Annex A (informative): Guidelines .12 A.1 Terminal requirements .12 A.1.1 Service options12 A.1.2 Communication set-up12 A.1.2.1 Communication setup in audio mode13 A.1.2.2 Communication setup in mute mode.13 A.1.2.3 Commu

18、nication setup in video-audio mode13 ETSI ETSI TS 122 401 V8.0.0 (2008-10) 4 3GPP TS 22.401 version 8.0.0 Release 8 A.1.3 Communication release.13 A.2 Change of communication mode13 A.2.1 Mute13 A.2.2 Frozen .13 A.2.3 Audio/video 14 A.2.4 External source .14 A.2.5 Synchronization 14 A.2.6 Other .14

19、A.3 Use cases 14 Annex B (informative): Change history .15 History 16 ETSI ETSI TS 122 401 V8.0.0 (2008-10) 5 3GPP TS 22.401 version 8.0.0 Release 8 Foreword This Technical Specification (TS) was been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protoco

20、ls for Advanced Networking (TISPAN) and originally published as ETSI TS 181 001 4. It was transferred to the 3rdGeneration Partnership Project (3GPP) in May 2008. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should t

21、he TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater ind

22、icates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction TISPAN NGN base

23、s the provision of real-time communication services on the 3GPP specified IMS. This is a flexible tool that can provide a wide range of service interactions between terminals and networks. Videotelephony provides a specific use of the generic capabilities of the IMS. The present document provides re

24、quirements to investigate the capabilities of the IMS to provide Videotelephony, and may be used for a “gap analysis“ of the features and capabilities provided by the IMS. The specific services and interactions described in the present document are based on other service specifications. The IMS is a

25、n inherently multimedia service control platform, and should be able to provide all of these services. The interactions between the user and the terminal and the terminal and the network are not provided. The services and capabilities provided by a TISPAN NGN are described in TS 181 005 2. The requi

26、rements for services, described in the present document, also take account of the interactions required between interconnected networks - both between NGN and the interconnection of NGN with legacy networks. The aim of the present document is to assist network operators and service providers to depl

27、oy NGN multimedia services. ETSI ETSI TS 122 401 V8.0.0 (2008-10) 6 3GPP TS 22.401 version 8.0.0 Release 8 1 Scope The present document defines the requirements for a videotelephony service which may be supported by a TISPAN NGN. These requirements form the basis for the definition of network capabi

28、lities. The present document provides interoperability service requirements for interconnection between existing networks and a TISPAN NGN, and between TISPAN NGN. The present document only provides requirements for IP multimedia based networks. Services provided by a TISPAN NGN to support legacy te

29、rminals and interfaces (PSTN/ISDN emulation) are defined in existing PSTN/ISDN documents. Requirements for PSTN/ISDN emulation are out of scope of the present document and are described in other documents. The applicability of PSTN/ISDN simulation services to the videotelephony service requirements

30、are defined in the present document. The requirements in the present document are described from the user point of view. The requirements do not take into account capabilities of existing protocols defined for the IMS. The evolution or modifications to these protocols are beyond the scope of the pre

31、sent document. NOTE: The present document uses the term “NGN“ only in the context of TISPAN. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication

32、, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the

33、latest version of that document in the same Release as the present document. 1 ETSI TS 181 002: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Multimedia Telephony with PSTN/ISDN simulation services“. 2 ETSI TS 181 005: “Telecommunications and Int

34、ernet converged Services and Protocols for Advanced Networking (TISPAN); Services and Capabilities Requirements“. 3 ETSI TR 180 000: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); NGN Terminology“. 4 ETSI TS 181 001 (V1.1.1): “Telecommunications a

35、nd Internet converged Services and Protocols for Advanced Networking (TISPAN); Videotelephony over NGN; Stage 1 service description“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions given in TR 180 000 3 apply: originating

36、 party; terminating party. ETSI ETSI TS 122 401 V8.0.0 (2008-10) 7 3GPP TS 22.401 version 8.0.0 Release 8 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACR Anonymous Communication Rejection AoC Advice of Charge CB Communication session Barring CCBS Co

37、mmunication Completion on Busy Subscriber CDIV Communication DIVersion CIF Common Intermediate Format CONF CONFerence CW Communication Waiting ECT Explicit Communication Transfer HOLD communication HOLD IMS IP Multimedia Subsystem IP Internet Protocol ISDN Intergrated Services Digital Network MCID M

38、alicious Communication IDentification MWI Message Waiting Indication NGN Next Generation Network OIP Originating Identification Presentation OIR Originating Identification Restriction PCM Pulse Coded Modulation PIP PIcture and Picture PSTN Public Swithched Telephone Network QCIF Quarter Common Inter

39、mediate Format RTP Real-time Transport Protocol SMS Short Message Service TIP Terminating Identification Presentation TIR Terminating Identification Restriction 4 Service description Videotelephony is a real time conversational service using video media and audio or other types of media. The service

40、 is assumed to be applicable only to dedicated terminal equipment with video capabilities. The videotelephony service may be considered as a specific instance of an IP multimedia service, or as part of the Multimedia Telephony with PSTN/ISDN Simulation Services. 5 Procedures 5.1 General service requ

41、irements The videotelephony service shall conform to the requirements in TS 181 005 2, clause 5.2.1. In particular, the following capabilities described in TS 181 005 2 shall be applicable to this service: Handling of an incoming session (by the terminating entity). Presentation of session originato

42、r identity. Negotiation of an incoming session. Accepting or rejecting an incoming session. Handling of an ongoing session. User modification of media in an ongoing session. Presentation of identity of connected-to party of a session. ETSI ETSI TS 122 401 V8.0.0 (2008-10) 8 3GPP TS 22.401 version 8.

43、0.0 Release 8 Ending a session. Capability Negotiation. Redirecting of IP Multimedia sessions. Regulatory service requirements. Lawful Intercept requirements. Emergency service requirements. NOTE: Emergency Service support for video may be limited. Malicious Communication Identity service requiremen

44、ts (MCID). Anonymous Communications Rejection service requirements (ACR). 5.2 Registration, provisioning, activation, invocation and withdrawal The requirements for Registration/Log-out, provisioning, activation, invocation and withdrawal shall be as described in TS 181 005 2. 5.3 Charging and accou

45、nting The requirements for charging and accounting shall be as described in TS 181 005 2. 6 Quality of service requirements 6.1 General The quality of service requirements shall be as described in TS 181 005 2. The following parameters may also be taken into account: Overall Delay, Delay Variation,

46、Differential Delay between sound and image, Sound Quality, Image Quality, Echo Cancellation, Sensitivity to Packet Loss, etc. 6.2 Video quality Four profiles are defined in table 1. Other enhancement or additional functions may be added. Table 1: Video quality profile Profile Description A Basic Vid

47、eotelephony: PCM or equivalent telephony audio, QCIF or CIF video with limited movements capability. B Enhanced Videotelephony: wideband audio, CIF video. The service should be usable for sign language and lip-reading and should provide adequate representation of the fluid movements of a person disp

48、layed in head and shoulders view. Facial expressions shall be clearly recognized. C Television Broadcasting quality. D High Definition Television quality. 6.3 Audio quality Videotelephony does not place any additional requirements for audio quality. ETSI ETSI TS 122 401 V8.0.0 (2008-10) 9 3GPP TS 22

49、.401 version 8.0.0 Release 8 7 Interworking considerations 7.1 General An NGN shall support the interoperability of the videotelephony service with non NGN network services and vice versa. This includes interworking the audio component to the PSTN/ISDN and vice versa. The video component shall only be interworked if video is supported in the non NGN network. The scope of this interworking may result in a limited service capability. 7.2 Interworking with emulation services An NGN shall support the interoperability o

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 4415-2005 Aerospace Series Non-Metallic Materials Textiles Narrow Woven Fabrics Technical Specification Edition P 1《航空航天系列.非金属物质纺织品编织纤维技术规范.P1版》.pdf AECMA PREN 4415-2005 Aerospace Series Non-Metallic Materials Textiles Narrow Woven Fabrics Technical Specification Edition P 1《航空航天系列.非金属物质纺织品编织纤维技术规范.P1版》.pdf
  • AECMA PREN 4416-2005 Aerospace Series Non-Metallic Materials Textiles Wide Woven Fabrics Technical Specification Edition P 1《航空航天系列.非金属物质纺织品编织纤维技术规范.P1版》.pdf AECMA PREN 4416-2005 Aerospace Series Non-Metallic Materials Textiles Wide Woven Fabrics Technical Specification Edition P 1《航空航天系列.非金属物质纺织品编织纤维技术规范.P1版》.pdf
  • AECMA PREN 4419-1997 Aerospace Series Washers Chamfered with Counterbore in Alloy Steel Cadmium Plated Edition P 1《航空航天系列.垫圈斜面有埋头钉合金钢镉镀金.P1版》.pdf AECMA PREN 4419-1997 Aerospace Series Washers Chamfered with Counterbore in Alloy Steel Cadmium Plated Edition P 1《航空航天系列.垫圈斜面有埋头钉合金钢镉镀金.P1版》.pdf
  • AECMA PREN 4420-1999 Aerospace Series Clips Spring Tension in Alloy Steel FE-PA3903 Edition P 1《航空航天系列.夹弹簧张力合金钢FE-PA3903 E.P1版》.pdf AECMA PREN 4420-1999 Aerospace Series Clips Spring Tension in Alloy Steel FE-PA3903 Edition P 1《航空航天系列.夹弹簧张力合金钢FE-PA3903 E.P1版》.pdf
  • AECMA PREN 4421-2000 Aerospace Series Studs in Titanium Alloy TI-P64001 MoS2 Coated with Serrated Locking Ring in Corrosion Resisting Steel Strength Class 1 100 MPa (at Ambient Tem.pdf AECMA PREN 4421-2000 Aerospace Series Studs in Titanium Alloy TI-P64001 MoS2 Coated with Serrated Locking Ring in Corrosion Resisting Steel Strength Class 1 100 MPa (at Ambient Tem.pdf
  • AECMA PREN 4424-1998 Aerospace Series Rod-Ends Adjustable Single Fork and Threaded Shank with Engagement 1 5 x Thread Diameter in Titanium Alloys Dimensions and Loads Edition P 1《航.pdf AECMA PREN 4424-1998 Aerospace Series Rod-Ends Adjustable Single Fork and Threaded Shank with Engagement 1 5 x Thread Diameter in Titanium Alloys Dimensions and Loads Edition P 1《航.pdf
  • AECMA PREN 4425-1998 Aerospace Series Washers Tab in Corrosion Resisting Steel for Flight Control Rods Dimensions Edition P 1《航空航天系列.垫圈抗腐蚀飞行控制杆尺寸.P1版》.pdf AECMA PREN 4425-1998 Aerospace Series Washers Tab in Corrosion Resisting Steel for Flight Control Rods Dimensions Edition P 1《航空航天系列.垫圈抗腐蚀飞行控制杆尺寸.P1版》.pdf
  • AECMA PREN 4426-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts Edition P 1《航空航天系列.非金属物质纺织品试验方法传导和水提物PH值..pdf AECMA PREN 4426-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts Edition P 1《航空航天系列.非金属物质纺织品试验方法传导和水提物PH值..pdf
  • AECMA PREN 4429-2005 Aerospace series Non-metallic materials Textiles Testing of narrow woven fabrics Determination of warp bow Editon P 1《航空航天系列.非金属物质纺织品试验方法编织纤维.P1版》.pdf AECMA PREN 4429-2005 Aerospace series Non-metallic materials Textiles Testing of narrow woven fabrics Determination of warp bow Editon P 1《航空航天系列.非金属物质纺织品试验方法编织纤维.P1版》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1