1、 ETSI TS 123 108 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Mobile radio interface layer 3 specification, core network protocols; Stage 2 (3GPP TS 23.108 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL S
2、YSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 123 108 V14.0.0 (2017-04)13GPP TS 23.108 version 14.0.0 Release 14Reference RTS/TSGC-0123108ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017
3、 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any elec
4、tronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PD
5、F) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDelive
6、rableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, includin
7、g photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Inst
8、itute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Ma
9、rks registered and owned by the GSM Association. ETSI ETSI TS 123 108 V14.0.0 (2017-04)23GPP TS 23.108 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential I
10、PRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are a
11、vailable on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which
12、 are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
13、GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “s
14、hould“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation.
15、 ETSI ETSI TS 123 108 V14.0.0 (2017-04)33GPP TS 23.108 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g31.1 Scope of the Technical Specification . 6g31.2 Application to the interface structures 6g31.3
16、Structure of layer 3 procedures . 6g31.4 Test procedures 6g31.5 Use of logical channels . 7g31.6 Overview of control procedures . 7g31.6.1 List of procedures . 7g31.7 Applicability of implementations . 9g31.7.1 Voice Group Call Service (VGCS) and Voice Broadcast Service (VBS). 9g31.7.2 General Packe
17、t Radio Service (GPRS) . 9g32 References 10g32.1 Definitions and abbreviations . 12g32.1.1 Random values 13g32.2.2 Vocabulary 13g33 Radio Resource management procedures . 13g34 Elementary procedures for Mobility Management . 13g35 Elementary procedures for circuit-switched Call Control 13g36 Support
18、 for packet services 13g37 Examples of structured procedures 13g37.1 General . 13g37.1.1 Paging request . 14g37.1.2 Immediate assignment 14g37.1.3 Service request and contention resolution 14g37.1.4 Authentication . 15g37.1.5 Ciphering mode setting . 15g37.1.6 Transaction phase . 15g37.1.6.1 Channel
19、 mode modify . 15g37.1.7 Channel release . 16g37.2 Abnormal cases 16g37.3 Selected examples 16g37.3.1 Location updating . 17g37.3.2 Mobile originating call establishment . 18g37.3.3 Mobile terminating call establishment 22g37.3.4 Call clearing 24g37.3.5 DTMF protocol control . 26g37.3.6 Handover 27g
20、37.3.7 In-call modification. 28g37.3.8 Call re-establishment 28g37.3.9 Network initiated mobile originating call $(CCBS)$ . 29g38 Handling of unknown, unforeseen, and erroneous protocol data . 33g39 Message functional definitions and contents 34g310 General message format and information elements co
21、ding 34g311 List of system parameters . 34g3ETSI ETSI TS 123 108 V14.0.0 (2017-04)43GPP TS 23.108 version 14.0.0 Release 14Annex A (informative): Change History 35g3History 36g3ETSI ETSI TS 123 108 V14.0.0 (2017-04)53GPP TS 23.108 version 14.0.0 Release 14Foreword This Technical Specification (TS) h
22、as been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document specifies the procedures used at the radio interface core network protocols within the 3rdgeneration mobile telecommunications system and the digital cellular telecommunications system. The contents of the prese
23、nt document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z
24、 where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit
25、 is incremented when editorial only changes have been incorporated in the document. Introduction The present document includes references to features which are not part of the Phase 2+ Release 96 of the GSM Technical specifications. All subclauses which were changed as a result of these features con
26、tain a marker (see table below) relevant to the particular feature. ETSI ETSI TS 123 108 V14.0.0 (2017-04)63GPP TS 23.108 version 14.0.0 Release 141 Scope The present document specifies the procedures used at the radio interface (Reference Point Um, see 3GPP TS 24.002 15) for Call Control (CC), Mobi
27、lity Management (MM), and Session Management (SM). When the notations for “further study“ or “FS“ or “FFS“ are present in the present document they mean that the indicated text is not a normative portion of this standard. These procedures are defined in terms of messages exchanged over the control c
28、hannels of the radio interface. The control channels are described in 3GPP TS 44.003 16. The structured functions and procedures of this protocol and the relationship with other layers and entities are described in general terms in 3GPP TS 24.007 20. 1.1 Scope of the Technical Specification The proc
29、edures currently described in the present document are for the call control of circuit-switched connections, session management for GPRS services, mobility management and radio resource management for circuit-switched and GPRS services. 3GPP TS 24.010 21 contains functional procedures for support of
30、 supplementary services. 3GPP TS 24.011 22 contains functional procedures for support of point-to-point short message services. 3GPP TS 24.012 23 contains functional description of short message - cell broadcast. 3GPP TS 44.060 76 contains procedures for radio link control and medium access control
31、(RLC/MAC) of packet data physical channels. 3GPP TS 44.018 80 contains the procedures for the RR protocol. 3GPP TS 24.008 81 contains the procedures for the CN protocols. 3GPP TS 44.071 23a contains functional descriptions and procedures for support of location services. NOTE: “layer 3“ includes the
32、 functions and protocols described in this Technical Specification. The terms “data link layer“ and “layer 2“ are used interchangeably to refer to the layer immediately below layer 3. 1.2 Application to the interface structures The layer 3 procedures apply to the interface structures defined in 3GPP
33、 TS 44.003 16. They use the functions and services provided by layer 2 defined in 3GPP TS 44.005 18 and 3GPP TS 44.006 19. 3GPP TS 24.007 20 gives the general description of layer 3 including procedures, messages format and error handling. 1.3 Structure of layer 3 procedures A building block method
34、is used to describe the layer 3 procedures. The basic building blocks are “elementary procedures“ provided by the protocol control entities of the three sublayers, i.e. radio resource management, mobility management and connection management sublayer. Complete layer 3 transactions consist of specifi
35、c sequences of elementary procedures. The term “structured procedure“ is used for these sequences. 1.4 Test procedures Test procedures of the GSM radio interface signalling are described in 3GPP TS 51.010 39 and 3GPP TS 51.02x series. ETSI ETSI TS 123 108 V14.0.0 (2017-04)73GPP TS 23.108 version 14.
36、0.0 Release 141.5 Use of logical channels The logical control channels are defined in 3GPP TS 45.002 32. In the following those control channels are considered which carry signalling information or specific types of user packet information: i) Broadcast Control CHannel (BCCH): downlink only, used to
37、 broadcast Cell specific information; ii) Synchronization CHannel (SCH): downlink only, used to broadcast synchronization and BSS identification information; iii) Paging CHannel (PCH): downlink only, used to send page requests to Mobile Stations (MSs); iv) Random Access CHannel (RACH): uplink only,
38、used to request a Dedicated Control CHannel; v) Access Grant CHannel (AGCH): downlink only, used to allocate a Dedicated Control CHannel; vi) Standalone Dedicated Control CHannel (SDCCH): bi-directional; vii) Fast Associated Control CHannel (FACCH): bi-directional, associated with a Traffic CHannel;
39、 viii)Slow Associated Control CHannel (SACCH): bi-directional, associated with a SDCCH or a Traffic CHannel; ix) Cell Broadcast CHannel (CBCH): downlink only used for general (not point to point) short message information. x) Notification CHannel (NCH): downlink only, used to notify mobile stations
40、of VBS (Voice Broadcast Service) calls or VGCS (Voice Group Call Service) calls. Two service access points are defined on signalling layer 2 which are discriminated by their Service Access Point Identifiers (SAPI) (see 3GPP TS 44.006 19): i) SAPI 0: supports the transfer of signalling information in
41、cluding user-user information; ii) SAPI 3: supports the transfer of user short messages. Layer 3 selects the service access point, the logical control channel and the mode of operation of layer 2 (acknowledged, unacknowledged or random access, see 3GPP TS 44.005 18 and 3GPP TS 44.006 19) as required
42、 for each individual message. 1.6 Overview of control procedures 1.6.1 List of procedures The following procedures are specified in the Technical Specification: a) Clause 4 specifies elementary procedures for Mobility Management: - mobility management common procedures (subclause 4.3); - TMSI reallo
43、cation procedure (subclause 4.3.1); - authentication procedure (subclause 4.3.2); - identification procedure (subclause 4.3.3); - IMSI detach procedure (subclause 4.3.4); - abort procedure (subclause 4.3.5); - MM information procedure (subclause 4.3.6); - mobility management specific procedures (sub
44、clause 4.4); - location updating procedure (subclause 4.4.1); - periodic updating (subclause 4.4.2); ETSI ETSI TS 123 108 V14.0.0 (2017-04)83GPP TS 23.108 version 14.0.0 Release 14- IMSI attach procedure (subclause 4.4.3); - generic location updating procedure (subclause 4.4); - connection managemen
45、t sublayer service provision; - mobility management connection establishment (subclause 4.5.1); - mobility management connection information transfer phase (subclause 4.5.2); - mobility management connection release (subclause 4.5.3); - GPRS specific mobility management procedures (subclause 4.7); -
46、 GPRS attach procedure (subclause 4.7.3); - GPRS detach procedure (subclause 4.7.4); - GPRS routing area updating procedure (subclause 4.7.5); - GPRS common mobility management procedures (subclause 4.7); - GPRS P-TMSI reallocation procedure (subclause 4.7.6); - GPRS authentication and ciphering pro
47、cedure (subclause 4.7.7); - GPRS identification procedure (subclause 4.7.8); - GPRS information procedure (subclause 4.7.12); b) Clause 5 specifies elementary procedures for circuit switched Call Control comprising the following elementary procedures: - mobile originating call establishment (subclau
48、se 5.2.1); - mobile terminating call establishment (subclause 5.2.2); - signalling procedures during the active state (subclause 5.3); - user notification procedure (subclause 5.3.1); - call rearrangements (subclause 5.3.2); - DTMF protocol control procedure (subclause 5.5.7); - in-call modification
49、 (subclause 5.3.4); - call clearing initiated by the mobile station (subclause 5.4.3); - call clearing initiated by the network (subclause 5.4.4); - miscellaneous procedures; - in-band tones and announcements (subclause 5.5.1); - status enquiry procedure (subclause 5.5.3); - call re-establishment procedure (subclause 5.5.4); d) Clause 6 specifies elementary procedures for session management: - GPRS session management procedures (subclause 6.1); - PDP context activation (subclause 6.1.1); - PDP context modification (subclause 6.1.2); - PDP
