1、 ETSI TS 123 261 V15.0.0 (2018-06) Universal Mobile Telecommunications System (UMTS); LTE; IP flow mobility and seamless Wireless Local Area Network (WLAN) offload; Stage 2 (3GPP TS 23.261 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 123 261 V15.0.0 (2018-06)13GPP TS 23.261 versio
2、n 15.0.0 Release 15Reference RTS/TSGS-0223261vf00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803
3、/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior
4、 written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present do
5、cument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one
6、 of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content
7、 of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its
8、Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 123 261 V15.0.0 (20
9、18-06)23GPP TS 23.261 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-m
10、embers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursu
11、ant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present docu
12、ment. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or trade
13、name. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present do
14、cument may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/web
15、app.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of prov
16、isions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 261 V15.0.0 (2018-06)33GPP TS 23.261 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 Referen
17、ces 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Architecture model and concepts . 6g34.1 General concepts 6g34.2 Architecture reference model . 7g34.2.1 Non-roaming architecture . 7g34.2.1 Roaming architecture 7g34.3 High level functions . 7g34.3.1 S2c and H1
18、extensions for IP flow mobility . 7g34.3.1.1 General 7g34.3.1.2 DSMIPv6 enhancements . 7g34.3.2 Policy provisioning for Inter-system mobility and WLAN offload 8g34.3.3 Policy Control and Charging support . 8g34.3.4 Local Operating Environment Information . 8g35 IP Flow Mobility procedures and flows
19、. 9g35.1 General . 9g35.2 PDN connection establishment over first access 9g35.2.1 General 9g35.2.2 PDN connection establishment over 3GPP access 9g35.2.3 PDN connection establishment over WLAN 10g35.3 Addition of an access to a PDN connection . 11g35.3.1 General 11g35.3.2 Addition of WLAN access 11g
20、35.3.3 Addition of 3GPP access 13g35.4 IP flow mobility within a PDN connection 14g35.4.1 General 14g35.4.2 IP flow mobility within a PDN connection with network-initiated dynamic PCC . 14g35.4.3 IP flow mobility within a PDN connection with UE-initiated resource request . 16g35.5 Removal of an acce
21、ss from a PDN connection 17g35.5.1 UE-initiated removal of an access from a PDN connection 17g35.5.2 HA-initiated removal of an access from a PDN connection . 18g35.6 Addition of one access for multiple PDN connections to the same APN . 20g35.7 Detach and PDN disconnection procedures . 20g3Annex A (
22、informative): Change history . 21g3History 22g3ETSI ETSI TS 123 261 V15.0.0 (2018-06)43GPP TS 23.261 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work w
23、ithin the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TS
24、G for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes
25、have been incorporated in the document. ETSI ETSI TS 123 261 V15.0.0 (2018-06)53GPP TS 23.261 version 15.0.0 Release 151 Scope This document specifies the Stage 2 system description for IP flow mobility between a 3GPP and a WLAN. The technical solution is based on the working principles of DSMIPv6 2
26、 and it is applicable to both the Evolved Packet System and the I-WLAN mobility architecture. The specification covers the system description of seamless WLAN offload and IP flow mobility between 3GPP and WLAN as well as the respective interactions with the PCC and ANDSF frameworks. The system descr
27、iption for non seamless WLAN offload is covered in 3GPP TS 23.402 3. This document specifies also the detailed extensions to S2c 3 and H1 4 reference points for IP flow mobility. The extensions to the PCC and to the ANDSF framework are specified respectively in 3GPP TS 23.203 5 and in 3GPP TS 23.402
28、 3. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, su
29、bsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP
30、 TR 21.905: “Vocabulary for 3GPP Specifications“. 2 IETF RFC 5555 (June 2009): “Mobile IPv6 support for dual stack Hosts and Routers (DSMIPv6)“. 3 3GPP TS 23.402: “Architecture enhancements for non-3GPP accesses“. 4 3GPP TS 23.327: “Mobility between 3GPP-Wireless Local Area Network (WLAN) interworki
31、ng and 3GPP systems“. 5 3GPP TS 23.203: “Policy and Charging Control architecture“. 6 IETF RFC 4877 (April 2007): “Mobile IPv6 Operation with IKEv2 and the Revised IPsec Architecture“. 7 IETF RFC 5648 (October 2009): “Multiple Care-of Addresses Registration“. 8 IETF RFC 6089 (January 2011): “Flow Bi
32、ndings in Mobile IPv6 and Network Mobility (NEMO) Basic Support“. 9 3GPP TS 23.234: “3GPP System to Wireless Local Area Network (WLAN) Interworking; System Description“. 10 3GPP TS 23.401: “General Packet Radio Service (GPRS) enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTR
33、AN) access“. 11 3GPP TS 23.060: “General Packet Radio Service (GPRS); Service description; Stage 2“. 12 IETF RFC 6088 (January 2011): “Traffic Selectors for Flow Bindings“. 13 IETF RFC 5846 (June 2010): “Binding Revocation for IPv6 Mobility“. 14 IETF RFC 6275 (July 2011): “Mobility Support in IPv6“.
34、 ETSI ETSI TS 123 261 V15.0.0 (2018-06)63GPP TS 23.261 version 15.0.0 Release 153 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. The following terms used in this Technical Specification a
35、re defined in RFC 6275 14: Home Address, Care-of Address, binding cache, binding cache entry. The following terms used in this Technical Specification are defined in TS 23.402 3: Home network prefix. Home Agent: The Home Agent functionality consists in the DSMIPv6 anchor point functionality describe
36、d in RFC 5555 2 and in RFC 4877 6 and the extensions defined in RFC 5648 7 and RFC 6089 8. As per TS 23.402 3, the HA functionality is located in the PDN Gateway. As per TS 23.327 4 the HA functionality can be either a standalone entity or co-located with the GGSN or with the PDG. Local Operating En
37、vironment Information: This is a set of implementation specific parameters which describe the local environment in which the UE is operating. routing address: A routable IP address. In DSMIPv6 this is either the CoA (visited link case) or the HoA (in home link case). routing filter: A set of packet
38、flow IP header parameter values/ranges used to identify one or more IP flows for routing purposes. routing rule: The association of a routing filter with a routing address. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. BID
39、 Binding Identifier CoA Care-of AddressDSMIPv6 Dual-Stack Mobile IPv6 EPC Evolved Packet Core ePDG Evolved Packet Data Gateway EPS Evolved Packet System FID Flow Identifier GW GatewayHA Home Agent HoA Home AddressUE User Equipment 4 Architecture model and concepts 4.1 General concepts This document
40、specifies a mechanism for a UE to simultaneously connect to 3GPP access and WLAN and exchange different IP flows belonging to the same PDN connection through different accesses. The mechanism also enables seamless IP flow mobility, with IP flows belonging to the same or different applications being
41、moved seamlessly between a 3GPP access and WLAN. The solution allows the operator to indicate how the IP flows are routed through the available access systems and to selectively offload some traffic (e.g. best effort traffic) to WLAN while using UTRAN or E-UTRAN for other traffic (e.g. traffic with
42、specific QoS requirements). This is usually referred to as WLAN offload. The technical solution is based on DSMIPv6, RFC 5555 2 and is applicable to both the Evolved Packet System and the I-WLAN mobility architecture. Since the solution is based on DSMIPv6, IP address preservation and session contin
43、uity is provided when moving IP flows from one access to the other. ETSI ETSI TS 123 261 V15.0.0 (2018-06)73GPP TS 23.261 version 15.0.0 Release 154.2 Architecture reference model 4.2.1 Non-roaming architecture The baseline architecture reference model for IP flow mobility when EPS is deployed in th
44、e non roaming case is specified in TS 23.402 3. The baseline architecture reference model for IP flow mobility when I-WLAN mobility is deployed in the non roaming case is specified in TS 23.327 4. The baseline Non-roaming architecture for I-WLAN is specified in TS 23.234 9. The baseline Non-roaming
45、architecture for ANDSF is specified in TS 23.402 3. 4.2.1 Roaming architecture The baseline architecture reference model for IP flow mobility when EPS is deployed in the roaming case is specified in TS 23.402 3. The baseline architecture reference model for IP flow mobility when I-WLAN mobility is d
46、eployed in the roaming case is specified in TS 23.327 4. The baseline roaming architecture for I-WLAN is specified in TS 23.234 9. The baseline roaming architecture for ANDSF is specified in TS 23.402 3. 4.3 High level functions 4.3.1 S2c and H1 extensions for IP flow mobility 4.3.1.1 General The gr
47、anularity of access system connectivity and inter system mobility based on TS 23.402 3 and TS 23.327 4 is per PDN connection basis. This implies that when a handover occurs all the IP flows belonging to the same PDN connection are moved from the source access system to the target access system. With
48、 IP flow mobility it is possible to have a finer granularity in access system connectivity and inter system mobility: the handover procedures can be applied to a single or multiple IP flows belonging to the same PDN connection. This implies that some IP flows of one PDN connection can be routed via
49、one access system while simultaneously some IP flows of the same PDN connection can be routed via another access system. To achieve IP flow mobility the inter-system mobility signalling is enhanced in order to carry routing filters. The extensions to DSMIPv6 mobility signalling needed to carry routing filters when the UE is connected to multiple accesses simultaneously are specified in RFC 5648 7 and RFC 6089 8 and are applicable to both S2c and H1. 4.3.1.2 DSMIPv6 enhancements When a UE conf
