ETSI TS 124 011-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Point-to-Point (PP) Short Message Service (SM.pdf

上传人:李朗 文档编号:741031 上传时间:2019-01-11 格式:PDF 页数:130 大小:705.84KB
下载 相关 举报
ETSI TS 124 011-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Point-to-Point (PP) Short Message Service (SM.pdf_第1页
第1页 / 共130页
ETSI TS 124 011-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Point-to-Point (PP) Short Message Service (SM.pdf_第2页
第2页 / 共130页
ETSI TS 124 011-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Point-to-Point (PP) Short Message Service (SM.pdf_第3页
第3页 / 共130页
ETSI TS 124 011-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Point-to-Point (PP) Short Message Service (SM.pdf_第4页
第4页 / 共130页
ETSI TS 124 011-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Point-to-Point (PP) Short Message Service (SM.pdf_第5页
第5页 / 共130页
点击查看更多>>
资源描述

1、 ETSI TS 1Digital cellular telecommUniversal Mobile TelPoint-to-Point (PPsupport o(3GPP TS 24.0TECHNICAL SPECIFICATION124 011 V13.1.0 (2016mmunications system (Phase elecommunications System (LTE; PP) Short Message Service (Srt on mobile radio interface .011 version 13.1.0 Release 1316-04) e 2+) (GS

2、M); (UMTS); (SMS) 13) ETSI ETSI TS 124 011 V13.1.0 (2016-04)13GPP TS 24.011 version 13.1.0 Release 13Reference RTS/TSGC-0124011vd10 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF

3、 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic

4、 and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) ver

5、sion kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp

6、 If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying a

7、nd microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All

8、rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered a

9、nd owned by the GSM Association. ETSI ETSI TS 124 011 V13.1.0 (2016-04)23GPP TS 24.011 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is

10、publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the

11、ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be,

12、 or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. The

13、se should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not

14、“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 0

15、11 V13.1.0 (2016-04)33GPP TS 24.011 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g31.1 References 8g31.2 Abbreviations . 9g32 Overview of Short Message Service (SMS) support 9g32.1 Protocols and protocol architectur

16、e 9g32.2 Use of channels (A/Gb mode only) 12g32.3 Layer 2 SAPI 3 handling for circuit switched in A/Gb mode 12g32.4 Layer 2 (LLC) GPRS support (A/Gb mode only) 12g32.5 GSMS entity in Iu mode . 13g32.5A ESMS entity in S1 mode 14g32.6 MS support for SMS over GPRS 15g33 Service definition . 15g33.1 Gen

17、eral . 15g33.2 Service provided by the CM-sublayer 15g33.2.1 Definition of primitives on the MS side 15g33.2.1.1 MNSMS-ABORT-REQuest 16g33.2.1.2 MNSMS-DATA-REQuest 16g33.2.1.3 MNSMS-DATA-INDication . 16g33.2.1.4 MNSMS-ESTablish-REQuest . 16g33.2.1.5 MNSMS-ESTablish-INDication . 16g33.2.1.6 MNSMS-ERR

18、OR-INDication 17g33.2.1.7 MNSMS-RELease-REQuest . 17g33.2.2 Definition of primitives on the network side 17g33.2.2.1 MNSMS-ABORT-REQuest 17g33.2.2.2 MNSMS-DATA-REQuest 17g33.2.2.3 MNSMS-DATA-INDication . 17g33.2.2.4 MNSMS-ESTablish-REQuest . 18g33.2.2.5 MNSMS-ESTablish-INDication . 18g33.2.2.6 MNSMS

19、-ERROR-INDication 18g33.2.2.7 MNSMS-RELease-REQuest . 18g33.3 Service provided by SM-RL . 18g33.3.1 Definition of primitives on the MS side 18g33.3.1.1 SM-RL-DATA-REQuest 19g33.3.1.2 SM-RL-DATA-INDication . 19g33.3.1.3 SM-RL-MEMORY-AVAILABLE-REQuest . 19g33.3.1.4 SM-RL-REPORT-REQest 19g33.3.1.5 SM-R

20、L-REPORT-INDication . 19g33.3.2 Definition of primitives on the network side 20g33.3.2.1 SM-RL-DATA-REQuest 20g33.3.2.2 SM-RL-DATA-INDication . 20g33.3.2.3 SM-RL-MEMORY-AVAILABLE-INDication 20g33.3.2.4 SM-RL-REPORT-REQuest 20g33.3.2.5 SM-RL-REPORT-INDication . 20g34 Void . 21g35 CM-procedures . 21g3

21、5.1 General . 21g35.2 Short Message Control states . 21g35.2.1 SMC-CS states at the MS side of the radio interface 21g3ETSI ETSI TS 124 011 V13.1.0 (2016-04)43GPP TS 24.011 version 13.1.0 Release 135.2.1.1 Mobile Originating Case . 21g35.2.1.1.1 MO-Idle (State 0) 21g35.2.1.1.2 MO-MM-connection pendi

22、ng (State 1) . 21g35.2.1.1.3 MO-Wait for CP-ACK (State 2) 21g35.2.1.1.4 MO-MM-connection established (State 3) 21g35.2.1.2 Mobile Terminating case . 22g35.2.1.2.1 MT-Idle (State 0) . 22g35.2.1.2.2 MT-Wait for CP-ACK (State 2) 22g35.2.1.2.3 MT-MM-connection established (State 3) . 22g35.2.2 SMC-GP an

23、d SMC-EP states at the MS side of the radio interface 22g35.2.2.1 Mobile Originating Case . 22g35.2.2.1.1 MO-Idle (State 0) 22g35.2.2.1.2 MO-GMM-connection pending (State 1) (Iu mode only) . 22g35.2.2.1.3 MO-Wait for CP-ACK (State 2) 22g35.2.2.1.4 MO-Wait for CP-Data (State 3) . 22g35.2.2.1.5 MO-EMM

24、-connection pending (State 4) (S1 mode only) . 22g35.2.2.2 Mobile Terminating case . 22g35.2.2.2.1 MT-Idle (State 0) . 23g35.2.2.2.2 MT-Wait for RP-ACK (State 1) 23g35.2.2.2.3 MT-Wait for CP-ACK (State 2) 23g35.2.3 SMC-CS states at the network side of the radio interface . 23g35.2.3.1 Mobile Origina

25、ting Case . 23g35.2.3.1.1 MO-Idle (State 0) 23g35.2.3.1.2 MO-Wait for CP-ACK (State 2) 23g35.2.3.1.3 MO-MM-connection established (State 3) 23g35.2.3.2 Mobile Terminating Case 23g35.2.3.2.1 MT-Idle (State 0) . 23g35.2.3.2.2 MT-MM-connection pending (State 1) . 23g35.2.3.2.3 MT-Wait for CP-ACK (State

26、 2) 23g35.2.3.2.4 MT-MM-connection established (State 3) . 24g35.2.4 SMC-GP and SMC-EP states at the network side of the radio interface 24g35.2.4.1 Mobile Originating Case . 24g35.2.4.1.1 MO-Idle (State 0) 24g35.2.4.1.2 MO-Wait for RP-ACK (State 1) 24g35.2.4.1.3 MO-Wait for CP-ACK(State 2) . 24g35.

27、2.4.2 Mobile Terminating Case 24g35.2.4.2.1 MT-Idle (State 0) . 24g35.2.4.2.2 MT-Wait for CP-ACK (State 1) 24g35.2.4.2.3 MT-Wait for CP DATA (State 2) 24g35.3 Short Message Control procedures . 24g35.3.1 MM-connection establishment for circuit switched service . 25g35.3.2 RPDU transfer 25g35.3.2.1 R

28、PDU transfer for circuit switched service . 25g35.3.2.2 RPDU transfer for GPRS and EPS 25g35.3.3 Release of MM and CM connections 27g35.3.4 Abnormal cases . 27g35.4 Concatenating short message or notification transfers . 28g36 SM-RL-procedures . 29g36.1 General . 29g36.2 Transition states of SMR ent

29、ity 29g36.2.1 SMR-states at the MS-side of the radio interface . 29g36.2.1.1 Idle (State 0) 29g36.2.1.2 Wait for RP-ACK (State 1) . 29g36.2.1.2a Wait to send RP-ACK (State 3) 29g36.2.1.3 Wait for RETRANS TIMER (State 4) 29g36.2.2 SMR-states at the network side of the radio interface 29g36.2.2.1 Idle

30、 (State 0) 29g36.2.2.2 Wait for RP-ACK (State 1) . 30g36.2.2.3 Wait to send RP-ACK (State 3) 30g36.3 Short Message Relay procedures 30g36.3.1 TPDU relaying 30g3ETSI ETSI TS 124 011 V13.1.0 (2016-04)53GPP TS 24.011 version 13.1.0 Release 136.3.2 Void 31g36.3.3 Notification relaying . 31g36.3.3.1 MS s

31、ide . 31g36.3.3.1.1 Idle state 31g36.3.3.1.2 Wait for RP-ACK state 31g36.3.3.1.3 Wait for RETRANS Timer state 32g36.3.3.2 Network side . 32g36.3.3.2.1 Idle state 32g36.3.3.2.2 Wait to Send RP-ACK state 32g36.3.4 Abnormal cases . 32g37 Message functional definitions and content . 32g37.1 General . 32

32、g37.2 Messages for short message or notification transfer on CM 33g37.2.1 CP-DATA . 33g37.2.2 CP-ACK 33g37.2.3 CP-ERROR . 33g37.3 Messages for short message and notification transfer on SM-RL 33g37.3.1 RP-DATA . 34g37.3.1.1 RP-DATA (Network to Mobile Station) . 34g37.3.1.2 RP-DATA (Mobile Station to

33、 Network) . 34g37.3.2 RP-SMMA 34g37.3.3 RP-ACK 34g37.3.4 RP-ERROR . 35g38 Message format and information elements coding . 35g38.1 CP-messages . 35g38.1.1 General 35g38.1.2 Protocol Discriminator and Transaction Identifier . 35g38.1.3 Message type 35g38.1.4 Other required information elements 36g38.

34、1.4.1 CP-User data element 36g38.1.4.2 CP-Cause element . 36g38.2 RP-messages . 37g38.2.1 General 37g38.2.2 Message type indicator (MTI) 37g38.2.3 Message reference. 38g38.2.4 Void 38g38.2.5 Other required information elements 38g38.2.5.1 Originator address element . 38g38.2.5.2 Destination address

35、element 38g38.2.5.3 RP-User data element 39g38.2.5.4 RP-Cause element . 39g39 Handling of unknown, unforeseen, and erroneous protocol data . 41g39.1 General . 41g39.2 CP Error Handling 41g39.2.1 Message too short . 42g39.2.2 Unknown or unforeseen transaction identifier 42g39.2.3 Unknown or unforesee

36、n message type 42g39.2.4 Non-semantical mandatory information element errors 42g39.2.5 Messages with semantically incorrect contents 43g39.3 RP Error Handling 43g39.3.1 Message too short . 43g39.3.2 Unknown or unforeseen Message Reference 43g39.3.3 Unknown or unforeseen message type 43g39.3.4 Non-se

37、mantical mandatory information element errors 44g39.3.5 Messages with semantically incorrect contents 44g310 Timers. 44g3Annex A (informative): Arrow diagrams . 45g3ETSI ETSI TS 124 011 V13.1.0 (2016-04)63GPP TS 24.011 version 13.1.0 Release 13Annex B (normative): SDL-description of the CM-layer . 5

38、5g3B.1 Introduction 55g3Annex C (informative): Arrow diagrams . 101g3Annex D (normative): SDL-description of the short message relay layer 107g3D.1 Introduction 107g3Annex E (informative): Cause definition 115g3Annex F (informative): LAPDm SAPI 3 handling for short message service 120g3Annex G (info

39、rmative): Change history . 127g3History 129g3ETSI ETSI TS 124 011 V13.1.0 (2016-04)73GPP TS 24.011 version 13.1.0 Release 13Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The present document defines the Short Message Service (SMS) suppo

40、rt on mobile radio interface within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying chan

41、ge of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substa

42、nce, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 011 V13.1.0 (2016-04)83GPP TS 24.011 version 13.1.0 Release 131 Scope The present document specifies the procedures used

43、across the mobile radio interface by the signalling layer 3 function Short Message Control (SMC) and Short Message Relay function (SM-RL) for circuit switched in A/Gb mode, GPRS and EPS. 1.1 References The following documents contain provisions which, through reference in this text, constitute provi

44、sions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a refer

45、ence to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 Void. 1a 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 23.040: “Technical realization of the Short Me

46、ssage Service (SMS) Point-to-Point (PP)“. 3a 3GPP TS 23.060: “General Packet Radio Service (GPRS); Service description; Stage 2“. 3 3GPP TS 44.006: “Mobile Station - Base Station System (MS - BSS) interface; Data Link (DL) layer specification“. 4 3GPP TS 24.007: “Mobile radio interface signalling la

47、yer 3; General aspects“. 5 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 5a 3GPP TS 25.331: “Radio Resource Control (RRC); Protocol Specification“. 5b 3GPP TS 33.102: “3G Security; Security Architecture“. 5c 3GPP TS 42.017: “Subscriber Identity Modules (SIM); Functional characteris

48、tics“. 6a 3GPP TS 44.064: “General Packet Radio Service (GPRS); Logical Link Control (LLC) layer specification “. 6 ISO 7498: “Information processing systems - Open Systems Interconnection - Basic Reference Model“. 7 3GPP TS 44.018: “Mobile radio interface layer 3 specification; Radio Resource Contr

49、ol Protocol“. 8 3GPP TS 25.413: “UTRAN Iu interface RANAP signalling“. 9 3GPP TS 23.401: “General Packet Radio Service (GPRS) enhancements for Evolved Universal Terrestrial Radio Access Network (E-UTRAN) access“ 10 3GPP TS 24.301: “Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS); Stage 3“ 11 3GPP TS 23.272: “Circuit Switched Fallback in Evolved Packet System; Stage 2“ 12 3GPP TS 29.118: “Mobility Management Entity (MME) Visitor Location Register (VLR) SGs interface specification“ ETSI ETSI TS 124 011 V13.1.0 (2016-

展开阅读全文
相关资源
猜你喜欢
  • ASTM D2068-2017 Standard Test Method for Determining Filter Blocking Tendency《测定过滤器阻塞倾向的标准试验方法》.pdf ASTM D2068-2017 Standard Test Method for Determining Filter Blocking Tendency《测定过滤器阻塞倾向的标准试验方法》.pdf
  • ASTM D2070-1991(2006) Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf ASTM D2070-1991(2006) Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf
  • ASTM D2070-1991(2010) Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf ASTM D2070-1991(2010) Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf
  • ASTM D2070-2016 Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf ASTM D2070-2016 Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf
  • ASTM D2070-2016e1 Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf ASTM D2070-2016e1 Standard Test Method for Thermal Stability of Hydraulic Oils《液压油热稳定性的标准试验方法》.pdf
  • ASTM D2074-2007 Standard Test Methods for Total Primary Secondary and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method《用交替指示剂法测定脂肪胺中总胺、伯胺、仲胺和叔胺的标准试验方法》.pdf ASTM D2074-2007 Standard Test Methods for Total Primary Secondary and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method《用交替指示剂法测定脂肪胺中总胺、伯胺、仲胺和叔胺的标准试验方法》.pdf
  • ASTM D2074-2007(2013) Standard Test Methods for Total Primary Secondary and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method《用交替指示剂法测定脂肪胺中总胺、伯胺、仲胺和叔胺的标准试验方法》.pdf ASTM D2074-2007(2013) Standard Test Methods for Total Primary Secondary and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method《用交替指示剂法测定脂肪胺中总胺、伯胺、仲胺和叔胺的标准试验方法》.pdf
  • ASTM D2084-2007 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter《用振动圆盘硫化计测定橡胶硫化性能的标准试验方法》.pdf ASTM D2084-2007 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter《用振动圆盘硫化计测定橡胶硫化性能的标准试验方法》.pdf
  • ASTM D2084-2011 Standard Test Method for Rubber PropertyVulcanization Using Oscillating Disk Cure Meter 《用振荡式硫化仪测定橡胶硫化作用的特性的标准试验方法》.pdf ASTM D2084-2011 Standard Test Method for Rubber PropertyVulcanization Using Oscillating Disk Cure Meter 《用振荡式硫化仪测定橡胶硫化作用的特性的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1