ETSI TS 124 239-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Flexible Alerting (FA) using IP Multimedia (IM) Cor.pdf

上传人:orderah291 文档编号:741183 上传时间:2019-01-11 格式:PDF 页数:25 大小:217.86KB
下载 相关 举报
ETSI TS 124 239-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Flexible Alerting (FA) using IP Multimedia (IM) Cor.pdf_第1页
第1页 / 共25页
ETSI TS 124 239-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Flexible Alerting (FA) using IP Multimedia (IM) Cor.pdf_第2页
第2页 / 共25页
ETSI TS 124 239-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Flexible Alerting (FA) using IP Multimedia (IM) Cor.pdf_第3页
第3页 / 共25页
ETSI TS 124 239-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Flexible Alerting (FA) using IP Multimedia (IM) Cor.pdf_第4页
第4页 / 共25页
ETSI TS 124 239-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Flexible Alerting (FA) using IP Multimedia (IM) Cor.pdf_第5页
第5页 / 共25页
点击查看更多>>
资源描述

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelFlexible AlertingCore NeProt(3GPP TS 24.2TECHNICAL SPECIFICATION124 239 V13.0.0 (2016communications system (Phaelecommunications System (LTE; g (FA) using IP Multimedia (Ietwork (CN) subsystem; rotocol specification .239 version 13.0.0 Release 131

2、6-01) hase 2+); (UMTS); (IM) 13) ETSI ETSI TS 124 239 V13.0.0 (2016-01)13GPP TS 24.239 version 13.0.0 Release 13Reference RTS/TSGC-0124239vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562

3、00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any

4、 electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Forma

5、t (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status

6、/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including pho

7、tocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute

8、 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks r

9、egistered and owned by the GSM Association. ETSI ETSI TS 124 239 V13.0.0 (2016-01)23GPP TS 24.239 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs,

10、if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are availa

11、ble on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are,

12、 or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM iden

13、tities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“,

14、“should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ET

15、SI TS 124 239 V13.0.0 (2016-01)33GPP TS 24.239 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Flexible Alerting (FA) 7

16、g34.1 Introduction 7g34.2 Description . 7g34.2.1 General description . 7g34.3 Operational requirements . 8g34.3.1 Provision/withdrawal 8g34.3.2 Requirements on the originating network side 8g34.3.3 Requirements on the terminating network side . 9g34.4 Syntax requirements . 9g34.5 Signalling procedur

17、es . 9g34.5.1 General 9g34.5.2 Activation/deactivation . 9g34.5.2.1 General 9g34.5.2.2 Demand member activation of a subscribers default FA group(s) . 9g34.5.2.3 Demand member activation of a specified FA group 9g34.5.2.4 Demand member deactivation of a subscribers default FA group(s) 10g34.5.2.5 De

18、mand member deactivation of a specified FA group 10g34.5.3 Registration/erasure 10g34.5.4 Interrogation . 10g34.5.4.1 General 10g34.5.4.2 Interrogation using Ut interface 10g34.5.4.3 Interrogation using the SIP-based user configuration . 10g34.5.5 Invocation and operation 10g34.5.5.1 Actions at the

19、AS serving the originating UE . 10g34.5.5.2 Actions at the AS serving the pilot identity 10g34.6 Interaction with other services 11g34.6.1 Communication session Hold (HOLD). 11g34.6.2 Terminating Identification Presentation (TIP) 11g34.6.3 Terminating Identification Restriction (TIR) 11g34.6.4 Origi

20、nating Identification Presentation (OIP) . 11g34.6.5 Originating Identification Restriction (OIR) . 11g34.6.6 Conference (CONF) 12g34.6.7 Communication DIVersion services (CDIV) 12g34.6.7.1 Communication Forwarding Unconditional (CFU) 12g34.6.7.2 Communication Forwarding Busy (CFB) . 12g34.6.7.3 Com

21、munication Forwarding No Reply (CFNR) . 12g34.6.7.4 Communication Forwarding Not Reachable (CFNRc) . 12g34.6.7.5 Communication Deflection (CD) 13g34.6.7.6 Communication Forwarding on Not Logged-In (CFNL) 13g34.6.8 Message Waiting Indication (MWI) . 13g34.6.9 Communication Barring (CB). 13g34.6.10 Ex

22、plicit Communication Transfer (ECT) . 13g34.7 Parameter values (timers) . 13g34.8 Service configuration . 13g3ETSI ETSI TS 124 239 V13.0.0 (2016-01)43GPP TS 24.239 version 13.0.0 Release 134.8.1 General 13g34.8.2 Data semantics 14g34.8.3 XML schema 14g3Annex A (informative): Signalling flows 15g3A.1

23、 Scope of signalling flows . 15g3A.2 Introduction 15g3A.3 FA model signalling flow . 15g3A.3.1 Introduction 15g3A.3.2 FA when UE#1 and UE#2 have resources available and UE#3 does not have required resources available . 15g3Annex B (informative): Example of filter criteria . 22g3Annex C (informative)

24、: Change history . 23g3History 24g3ETSI ETSI TS 124 239 V13.0.0 (2016-01)53GPP TS 24.239 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TS

25、G and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for inform

26、ation; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been in

27、corporated in the document. ETSI ETSI TS 124 239 V13.0.0 (2016-01)63GPP TS 24.239 version 13.0.0 Release 131 Scope The present document provides the protocol details for the Flexible Alerting supplementary service in the IP Multimedia (IM) Core Network (CN) subsystem based on the requirements from 3

28、GPP TS 22.173 2. Flexible Alerting (FA) causes a call to a pilot identity to branch the call into several legs to alert several termination addresses (group members) simultaneously. The first leg to be answered is connected to the calling party. The other call legs are abandoned. The present documen

29、t is applicable to User Equipment (UE) and Application Servers (AS) which are intended to support the FA supplementary service. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific

30、 (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific

31、reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.173: “IP Multimedia Core Network Subsystem (IMS) Multimedia Telephony Service and supplementary services; Stage 1“. 3 3

32、GPP TS 23.002: “Network architecture“. 4 3GPP TS 24.238: “Session Initiation Protocol (SIP) based user configuration; Stage 3“. 5 3GPP TS 24.229: “Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3“. 6 3G

33、PP TS 24.623: “Extensible Markup Language (XML) Configuration Access Protocol (XCAP) over the Ut interface for Manipulating Simulation Services“. 7 3GPP TS 29.228: “IP Multimedia (IM) Subsystem Cx and Dx interfaces; Signalling flows and message contents“. 3 Definitions and abbreviations 3.1 Definiti

34、ons For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. ETSI ETSI TS 124 239 V13.0.0 (2016-01)73GPP TS 24.239

35、version 13.0.0 Release 133.2 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. AS App

36、lication Server CS Circuit SwitchedCN Core Network FA Flexible AlertingIP Internet Protocol IM IP MultimediaMMTEL Multimedia Telephony 4 Flexible Alerting (FA) 4.1 Introduction Flexible Alerting (FA) causes a call to a Pilot Identity to branch the call into several legs to alert several termination

37、addresses (group members) simultaneously. Additional calls may be delivered to the FA Pilot Identity at any time. The first leg to be answered is connected to the calling party. The other call legs are abandoned. The members of an FA group are described by a list of termination addresses. 4.2 Descri

38、ption 4.2.1 General description FA may be used for either a single user or multiple users. The difference between the two is in determining when the FA group is busy. In the single user case, the group is considered to be busy when one of the members is considered to be busy. In the multiple user ca

39、se, the group is considered to be busy when all of the accessible members are considered to be busy. A member is considered to be busy when it cannot accept the presentation of another call. The FA pilot identity may have features to manage incoming calls (e.g., Incoming Communications Barring). The

40、se features should take precedence over the corresponding features of individual members as described in subclause 4.6. If an FA pilot identity is an FA member Identity, the FA member loses his or her individual incoming call features. In this case, the FA members incoming call features are supersed

41、ed by the incoming call features of the FA pilot identity. If an FA pilot identity is not an FA member Identity, the features of the FA pilot identity may be changed only through user or service provider configuration. FA does not affect the ability of an FA member to originate calls. FA may affect

42、the ability of an FA member to receive calls. If an FA member has only a single identity that is the same as the FA pilot identity, the FA member may not receive calls except through the FA pilot identity. If an FA member has an identity different than the FA pilot identity, the FA member may receiv

43、e calls as an individual as well as calls through the FA pilot identity. Such an FA member may use revertive calling (i.e., a call to itself) for other purposes, such as retrieval of voice mail. ETSI ETSI TS 124 239 V13.0.0 (2016-01)83GPP TS 24.239 version 13.0.0 Release 134.3 Operational requiremen

44、ts 4.3.1 Provision/withdrawal The FA service may be provided after prior arrangement with the service provider. The establishment of the initial constituency (membership) of the FA group, along with additions to or subtractions from the set of group members, is performed by the service provider. The

45、 FA service may be withdrawn at the subscribers request or for administrative reasons. Withdrawal of the FA service means dissolution of the FA group and results in calls to the Pilot Identity being treated as calls to a vacant identity. Withdrawal of the FA service is performed by the service provi

46、der. As determined by service provider provisioning, the FA group may have the following subscription options, as summarized in table 4.3.1-1. Table 4.3.1-1: FA group subscription options Subscription option values Values Type - Single User. The FA group is considered to be busy when any member of t

47、he group is considered to be busy. - Multiple Users. The FA group is considered to be busy when all accessible members of the group are considered to be busy. As determined by service provider provisioning, the FA member may have the following subscription options, as summarized in table 4.3.1-2. Ta

48、ble 4.3.1-2: FA member subscription options Subscription option values Values Membership - Demand. An FA member is authorized to activate or deactivate his or her membership in the FA group(s). - Permanent. An FA member is always a member of his or her registered FA group(s). If an FA group is of ty

49、pe demand activation, any configured FA member is able to, by means of user configuration, change their status in the FA group from active to inactive or from inactive to active. The FA member status options are summarized in table 4.3.1-3. Table 4.3.1-3: FA member status options Subscription option values Values Status - Active. An FA member is eligible to be alerted when a call is placed to the Pilot Identity. - Inactive. An FA member is not eligible to be alerted when a call is placed to the Pilot Identity Available user configur

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1