1、 ETSI TS 124 424 V14.0.0 (2017-05) LTE; Management Object (MO) for Extensible Markup Language (XML) Configuration Access Protocol (XCAP) over the Ut interface for Manipulating Supplementary Services (SS) (3GPP TS 24.424 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 124 424 V14.0.0
2、(2017-05)13GPP TS 24.424 version 14.0.0 Release 14Reference DTS/TSGC-0124424ve00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfec
3、ture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be
4、modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretaria
5、t. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, pleas
6、e send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permi
7、ssion of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand th
8、e ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks regist
9、ered and owned by the GSM Association. ETSI ETSI TS 124 424 V14.0.0 (2017-05)23GPP TS 24.424 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if an
10、y, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available o
11、n the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or m
12、ay be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identitie
13、s. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “shou
14、ld not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS
15、 124 424 V14.0.0 (2017-05)33GPP TS 24.424 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 5g34 MO for XCAP over Ut
16、interface for manipulating SS . 7g35 MO configuration parameters 7g35.1 General . 7g35.2 Node: / 7g35.3 /Name 8g35.4 /Ext 8g35.5 /AccessForXCAP 8g35.6 /XCAP_conn_params_policy 8g35.7 /XCAP_conn_params_policy/ . 9g35.8 /XCAP_conn_params_policy/access 9g35.9 /XCAP_conn_params_policy/XDM_MO_ref 9g3Anne
17、x A (informative): DDF of MO for XCAP over Ut interface for manipulating SS 10g3Annex B (informative): Change history . 13g3History 14g3ETSI ETSI TS 124 424 V14.0.0 (2017-05)43GPP TS 24.424 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partners
18、hip Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increas
19、e in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements,
20、 corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 424 V14.0.0 (2017-05)53GPP TS 24.424 version 14.0.0 Release 141 Scope The present document defines the management object (MO) for extensible markup langua
21、ge (XML) configuration access protocol (XCAP) over the Ut interface for manipulating supplementary services (SS). The MO for XCAP over Ut interface for manipulating SS is compatible with OMA device management protocol specifications, version 1.2 and upwards, and is defined using the OMA DM device de
22、scription framework as described in the enabler release definition OMA-ERELD_DM-V1_2 2. The MO for XCAP over Ut interface for manipulating SS consists of relevant configuration parameters that can be managed for a UE supporting the UE role specified in 3GPP TS 24.623 3. 2 References The following do
23、cuments contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply.
24、- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP
25、Specifications“. 2 OMA OMA-ERELD-DM-V1_2-20070209-A: “Enabler Release Definition for OMA Device Management, Version 1.2“. 3 3GPP TS 24.623: “Extensible Markup Language (XML) Configuration Access Protocol (XCAP) over the Ut interface for Manipulating Supplementary Services“. 4 OMA OMA-TS-XDM_MO-V1_1-
26、20080627-A: “OMA Management Object for XML Document Management“. 5 OMA OMA-TS-DM_Protocol-V1_2-20070209-A: “OMA Device Management Protocol“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the
27、following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the
28、present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. DDF Device Description Framework DM Device Management IP Internet ProtocolIP-CAN IP-Connectivity Access Network ETSI ETSI TS 124 424 V14.0.0 (2017-05)63GPP TS 24.424 version 14.0.0 Release 14
29、MO Management Object OMA Open Mobile Alliance SS Supplementary ServicesUE User EquipmentXCAP XML Configuration Access Protocol XML Extensible Markup Language ETSI ETSI TS 124 424 V14.0.0 (2017-05)73GPP TS 24.424 version 14.0.0 Release 144 MO for XCAP over Ut interface for manipulating SS The MO for
30、XCAP over Ut interface for manipulating SS is used to manage settings of the UE for extensible markup language (XML) configuration access protocol (XCAP) over the Ut interface for manipulating supplementary services (SS). Figure 4-1 gives overview of the configuration parameters of the MO for XCAP o
31、ver Ut interface for manipulating SS. The MO for XCAP over Ut interface for manipulating SS covers configuration parameters for a UE supporting the UE role specified in 3GPP TS 24.623 3. The MO identifier is: urn:oma:mo:ext-3gpp-xcaputss:1.0. Protocol compatibility: This MO is compatible with OMA DM
32、 1.2. Ext ?Name ?AccessForXCAPXCAP_conn_params_policy ?+accessXDM_MO_refFigure 4-1: MO for XCAP over Ut interface for manipulating SS 5 MO configuration parameters 5.1 General This clause describes the configuration parameters for the MO for XCAP over Ut interface for manipulating SS. 5.2 Node: / Th
33、is interior node acts as a placeholder for one or more accounts for a fixed node. - Occurrence: OneOrMore - Format: node - Access Types: Get, Replace - Values: N/A The interior node is mandatory for a UE supporting the UE role specified in 3GPP TS 24.623 3. NOTE: One node is normally used. More node
34、s are only used in case the terminal supports multiple UICCs. ETSI ETSI TS 124 424 V14.0.0 (2017-05)83GPP TS 24.424 version 14.0.0 Release 14Child nodes of this interior node which are not defined in this version of the present document are ignored. 5.3 /Name This leaf is a name for the settings for
35、 the XCAP over the Ut interface for manipulating the SS. - Occurrence: ZeroOrOne - Format: chr - Access Types: Get, Replace - Values: 5.4 /Ext The Ext is an interior node for where the vendor specific information about the management of the XCAP over the Ut interface for manipulating the SS is being
36、 placed (vendor meaning application vendor, device vendor etc.). Usually the vendor extension is identified by vendor specific name under the ext node. The tree structure under the vendor identified is not defined and can therefore include one or more un-standardized sub-trees. - Occurrence: ZeroOrO
37、ne - Format: node - Access Types: Get - Values: N/A 5.5 /AccessForXCAP This leaf is the policy on access type used for XCAP. - Occurrence: One - Format: int - Access Types: Get, Replace - Values: one of the values specified in table 5.5-1. Table 5.5-1: Possible values for the AccessForXCAP leaf Valu
38、e Description 0 any access type 1 3GPP accesses only 2 EPC via WLAN IP-CAN only 3 Non-seamless WLAN offload only 4 3GPP accesses preferred, non-seamless WLAN offload as secondary 5 3GPP accesses preferred, EPC via WLAN IP-CAN as secondary 6-255 not assigned A “not assigned“ value is interpreted as “
39、any access type“ value. 5.6 /XCAP_conn_params_policy This interior node contains the XCAP connection parameters policy. - Occurrence: ZeroOrOne - Format: node ETSI ETSI TS 124 424 V14.0.0 (2017-05)93GPP TS 24.424 version 14.0.0 Release 14- Access Types: Get, Replace - Values: N/A If this interior no
40、de contains a child node not defined in this version of the present document, the child node is ignored. 5.7 /XCAP_conn_params_policy/ This interior node contains one XCAP connection parameters policy part. - Occurrence: OneOrMore - Format: node - Access Types: Get, Replace - Values: N/A If this int
41、erior node contains a child node not defined in this version of the present document, this interior node is ignored. If a descendant node of this interior node contains a value not defined in this version of the present document, this interior node is ignored. 5.8 /XCAP_conn_params_policy/access Thi
42、s leaf contains an access identifier, with values shown in table 5.8-1 - Occurrence: One - Format: int - Access Types: Get, Replace - Values: N/A Table 5.8-1: Possible values for the access leaf Value Description 1 3GPP accesses 2 Evolved Packet Core (EPC) via Wireless Local Access Network (WLAN) IP
43、-CAN (NOTE) 3 Evolved Packet Core (EPC) via trusted Wireless Local Access Network (WLAN) IP-CAN 4 Evolved Packet Core (EPC) via untrusted Wireless Local Access Network (WLAN) IP-CAN 0, 5-255 Not assigned NOTE: Evolved Packet Core (EPC) via Wireless Local Access Network (WLAN) IP-CAN encompasses both
44、 the Evolved Packet Core (EPC) via trusted Wireless Local Access Network (WLAN) IP-CAN and the Evolved Packet Core (EPC) via untrusted Wireless Local Access Network (WLAN) IP-CAN. 5.9 /XCAP_conn_params_policy/XDM_MO_ref This leaf contains an XCAP connection parameters reference. The value of this le
45、af is a full device URI as specified in OMA-TS-DM_Protocol-V1_2 5, identifying the interior node specified in OMA-TS-XDM_MO-V1_1 4 in the UE management tree. - Occurrence: One - Format: str - Access Types: Get, Replace - Values: N/A ETSI ETSI TS 124 424 V14.0.0 (2017-05)103GPP TS 24.424 version 14.0
46、.0 Release 14Annex A (informative): DDF of MO for XCAP over Ut interface for manipulating SS This DDF is the standardized minimal set. A vendor can define its own DDF for the complete device. This DDF can include more features than this minimal standardized version. 1.2 -The device manufacturer- -Th
47、e device model- Configuration parameters for the XCAP over the Ut interface for manipulating the SS The Management Object (MO) for Extensible Markup Language (XML) Configuration Access Protocol (XCAP) over the Ut interface for Manipulating Supplementary Services (SS). Name The name for the settings
48、for the XCAP over the Ut interface for manipulating the SS. text/plain AccessForXCAP ETSI ETSI TS 124 424 V14.0.0 (2017-05)113GPP TS 24.424 version 14.0.0 Release 14The policy on access type used for XCAP text/plain XCAP_conn_params_policy XCAP connection parameters policy. XCAP connection parameter
49、s policy part access An access identifier. text/plain XDM_MO_ref ETSI ETSI TS 124 424 V14.0.0 (2017-05)123GPP TS 24.424 version 14.0.0 Release 14An XCAP connection parameters reference. text/plain Ext A collection of all Extension objects. ETSI ETSI TS 124 424 V14.0.0 (2017-05)133GPP TS 24.424 version 14.0.0 Release 14Annex B (informative): Change history Change history Date Meeting TDoc CR Rev Cat Subject/Comment New version 2016-08 Incorporating C1-163574, C1-163575, C1-163576. “inteface“ corrected to “interface“. 0.1.0 20
