ETSI TS 124 429-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) ECT《数字蜂窝通信系统(第2+阶段) 全球移动通信系统(UMTS) ECT(版本7 0 0) 3GPP TS_1.pdf

上传人:吴艺期 文档编号:741338 上传时间:2019-01-11 格式:PDF 页数:26 大小:149.07KB
下载 相关 举报
ETSI TS 124 429-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) ECT《数字蜂窝通信系统(第2+阶段) 全球移动通信系统(UMTS) ECT(版本7 0 0) 3GPP TS_1.pdf_第1页
第1页 / 共26页
ETSI TS 124 429-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) ECT《数字蜂窝通信系统(第2+阶段) 全球移动通信系统(UMTS) ECT(版本7 0 0) 3GPP TS_1.pdf_第2页
第2页 / 共26页
ETSI TS 124 429-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) ECT《数字蜂窝通信系统(第2+阶段) 全球移动通信系统(UMTS) ECT(版本7 0 0) 3GPP TS_1.pdf_第3页
第3页 / 共26页
ETSI TS 124 429-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) ECT《数字蜂窝通信系统(第2+阶段) 全球移动通信系统(UMTS) ECT(版本7 0 0) 3GPP TS_1.pdf_第4页
第4页 / 共26页
ETSI TS 124 429-2008 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) ECT《数字蜂窝通信系统(第2+阶段) 全球移动通信系统(UMTS) ECT(版本7 0 0) 3GPP TS_1.pdf_第5页
第5页 / 共26页
点击查看更多>>
资源描述

1、 ETSI TS 124 429 V7.0.0 (2008-04)Technical Specification Digital cellular telecommunications system (Phase 2+);Universal Mobile Telecommunications System (UMTS);ECT (3GPP TS 24.429 version 7.0.0 Release 7)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 124 429 V7.0.0 (2008-04) 1 3GPP TS 24.429

2、version 7.0.0 Release 7 Reference DTS/TSGC-0124429v700 Keywords GSM, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06)

3、N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference

4、 version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change o

5、f status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Not

6、ification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the E

7、TSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 124 429 V7.0.0 (2008-04) 2 3GPP TS 24.429 version 7.0.0 Release 7 Intellectual Property Rights IP

8、Rs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or p

9、otentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carri

10、ed out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Gener

11、ation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP

12、and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. ETSI ETSI TS 124 429 V7.0.0 (2008-04) 3 3GPP TS 24.429 version 7.0.0 Release 7 Contents Intellectual Property Rights2 Foreword.2 Foreword.5 1 Scope 6 2 References 6 2.1 Normative references .6 2.2 Informative references7

13、 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .7 4 Explicit Communication Transfer (ECT).8 4.1 Introduction 8 4.2 Description .8 4.2.1 General description.8 4.3 Operational requirements .9 4.3.1 Provision/withdrawal9 4.3.2 Requirements on the transferor network side .9 4.3.3

14、Requirements on the transferee network side .9 4.3.4 Requirements on the transfer target network side.9 4.4 Coding requirements 9 4.5 Signalling requirements9 4.5.1 Activation/deactivation.9 4.5.1A Registration/erasure 9 4.5.1B Interrogation .9 4.5.2 Invocation and operation 10 4.5.2.1 Actions at th

15、e transferor UE10 4.5.2.2 Actions at the transferor P-CSCF10 4.5.2.3 Actions at the transferor S-CSCF10 4.5.2.4 Actions at the transferor AS10 4.5.2.4.1 Invocation of ECT service.10 4.5.2.4.2 Subsequent procedures 11 4.5.2.5 Actions at the transferee UE11 4.5.2.6 Actions at the transferee S-CSCF12 4

16、.5.2.7 Actions at the transferee AS12 4.5.2.7.1 Determine whether the ECT applies12 4.5.2.7.2 Actions of ECT when invoked with a transfer request 12 4.5.2.7.3 Actions of ECT when invoked again by the transferred communication 12 4.5.2.8 Void.12 4.5.2.9 Actions at the incoming I-CSCF .12 4.5.2.10 Act

17、ions at the outgoing IBCF12 4.5.2.11 Actions at the incoming IBCF.12 4.5.2.12 Actions at the BGCF .12 4.5.2.13 Actions at the MGCF 12 4.5.2.14 Actions at the transfer targets S-CSCF.13 4.5.2.15 Actions at the transfer targets AS.13 4.5.2.16 Actions at the transfer targets P-CSCF.13 4.5.2.17 Actions

18、at the transfer targets UE.13 4.6 Interaction with other services13 4.6.1 Communication HOLD (HOLD)13 4.6.2 Terminating Identification Presentation (TIP)13 4.6.3 Terminating Identification Restriction (TIR)13 4.6.4 Originating Identification Presentation (OIP).13 4.6.5 Originating Identification pre

19、sentation Restriction (OIR) 13 ETSI ETSI TS 124 429 V7.0.0 (2008-04) 4 3GPP TS 24.429 version 7.0.0 Release 7 4.6.6 CONFerence Calling (CONF) 13 4.6.7 Communication DIVersion Services (CDIV) .14 4.6.8 Malicious Communication IDentification (MCID) 14 4.6.9 Anonymous Communication Rejection and Commun

20、ication Barring (ACR/CB) .14 4.6.10 Explicit Communication Transfer (ECT) .14 4.6.10.1 Determine whether a previously transferred communication is transferred again 14 4.6.10.2 Handling of transfer requests 14 4.6.10.3 Actions when this ECT instance is invoked again by the transferred communication1

21、5 4.7 Interactions with other networks 15 4.7.1 Interaction with PSTN/ISDN15 4.7.2 Interaction with PSTN/ISDN Emulation 15 4.7.3 Interaction with external IP Network15 4.8 Parameter values (timers).15 4.9 Service configuration .15 Annex A (informative): Signalling flows 16 A.1 Blind transfer16 A.2 C

22、onsultative transfer.18 Annex B (informative): Example of filter criteria.20 B.1 Example of filter criteria for ECT 20 Annex C (informative): Example charging model.21 C.1 Example of B REFERs A to C 21 C.2 Example of A REFERs B to C 22 Annex D (informative): Bibliography.23 Annex E (informative): Ch

23、ange history .24 History 25 ETSI ETSI TS 124 429 V7.0.0 (2008-04) 5 3GPP TS 24.429 version 7.0.0 Release 7 Foreword This Technical Specification (TS) was been produced by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) and or

24、iginally published as ETSI TS 183 029 20. It was transferred to the 3rd Generation Partnership Project (3GPP) in December 2007. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the p

25、resent document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under

26、change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 429 V7.0.0 (2008-04) 6 3GPP TS 24.429 version

27、7.0.0 Release 7 1 Scope The present document specifies the stage three (protocol description) of the Explicit Communication Transfer (ECT) simulation service, based on stage one and two of the ISDN ECT supplementary service. Within the Next Generation Network (NGN) the stage 3 description is specifi

28、ed using the IP Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either spec

29、ific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-speci

30、fic reference implicitly refers to the latest version of that document in the same Release as the present document. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, informati

31、on sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shal

32、l include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1

33、 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI ES 283 0

34、03: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IP Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP) Stage 3 3GPP TS 24.229, modified“. 2 IETF RFC 3515: “The Session Initiation Pr

35、otocol (SIP) Refer Method“. 3 IETF RFC 3892: “The Session Initiation Protocol (SIP) Referred-By Mechanism“. 4 IETF RFC 3891: “The Session Initiation Protocol (SIP) “Replaces“ Header“. 5 ETSI ES 283 027: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN

36、); Endorsement of the SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks3GPP TS 29.163 (Release 7), modified“. 6 IETF RFC 3261: “SIP: Session Initiation Protocol“. ETSI ETSI TS 124 429 V7.0.0 (2008-04) 7 3GPP TS 24.429 version 7.0.0 Re

37、lease 7 7 ETSI TS 183 033: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IP Multimedia; Diameter based protocol for the interfaces between the Call Session Control Function and the User Profile Server Function/Subscription Locator Function; Signa

38、lling flows and protocol details 3GPP TS 29.228 and 3GPP TS 29.229“. 8 ETSI TS 183 010: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); NGN Signalling Control Protocol; Communication HOLD (HOLD) PSTN/ISDN simulation services; Protocol specification

39、“. 9 ETSI TS 183 005: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services: Conference (CONF); Protocol specification“. 2.2 Informative references 20 ETSI TS 183 029 V1.3.2: “Telecommunications and Internet converged Servic

40、es and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services: Explicit Communication Transfer (ECT); Protocol specification“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: ECT Session Identifie

41、r URI: PSI created and inserted by a ECT AS that resolves to the AS itself NOTE: If this URI contains correlation information it is not to reveal identity information about any party involved in the transfer. transferee: party being transferred to the transfer target transferor: party initiating the

42、 transfer transfer target: party that the existing communication is transferred to NOTE: After transfer the transferee and the transfer target are in communication with each other. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: 3GPP 3rdGeneration Partn

43、ership Project (www.3gpp.org) ACR Anonymous Communication Rejection AS SIP Application Server BGCF Border Gateway Control Function CB Communication Barring CDIV Communication DIVersion CONF CONFerence CSCF Call Session Control Function ECT Explicit Communication Transfer GRUU Globally Routable User

44、agent URI HOLD communication HOLD IBCF Interconnect Border Control Function I-CSCF Interrogating-CSCF IETF Internet Engineering Task Force IFC Initial Filter Criteria ISDN Integrated Services Digital Network MCID Malicious Communication IDentification ETSI ETSI TS 124 429 V7.0.0 (2008-04) 8 3GPP TS

45、24.429 version 7.0.0 Release 7 MGCF Media Gateway Control Function OCB Outgoing Communication Barring OIP Originating Identification Presentation OIR Originating Identification presentation Restriction P-CSCF Proxy-CSCF PSTN Public Switch Telephone Network S-CSCF Serving-CSCF SIP Session Initiation

46、Protocol TIP Terminating Identification Presentation TIR Terminating Identification presentation Restriction UE User Equipment 4 Explicit Communication Transfer (ECT) 4.1 Introduction The service provides a party involved in a communication to transfer that communication to a third party. 4.2 Descri

47、ption 4.2.1 General description The Explicit Communication Transfer (ECT) service provides a party involved in a communication to transfer that communication to a third party. There are three actors active in a transfer, they are acting in the following roles: transferor, the party that initiates th

48、e transfer of the active communication that it has with the transferee; transferee, the party which stays in the communication which is transferred; and transfer target, the party which the communication is transferred to and which replaces the transferor in the communication. Assumption is that ini

49、tially the transferee and the transferor are involved in a communication. In the present document: the party that originated the original communication before transfer is tagged with UE-A; the party that terminated the original communication before transfer is tagged UE-B; and the party that is newly introduced into communication with the transferee, e.g. the transfer Target is tagged UE-C. There are two initial situations possible in which transfer shall be possible: The transferor has no ongoing consultation communication

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 1335-1 Berichtigung 1-2002 Corrigenda to DIN EN 1335-1 2002 (EN 1335-1 2000 AC 2002)《DIN EN 1335-1 2002 技术勘误 (EN 1335-1 2000 AC 2002)》.pdf DIN EN 1335-1 Berichtigung 1-2002 Corrigenda to DIN EN 1335-1 2002 (EN 1335-1 2000 AC 2002)《DIN EN 1335-1 2002 技术勘误 (EN 1335-1 2000 AC 2002)》.pdf
  • DIN EN 1335-1-2002 Office furniture - Office work chair - Part 1 Dimensions Determination of dimensions German version EN 1335-1 2000《办公家具 办公椅 第1部分 尺寸 尺寸的测定》.pdf DIN EN 1335-1-2002 Office furniture - Office work chair - Part 1 Dimensions Determination of dimensions German version EN 1335-1 2000《办公家具 办公椅 第1部分 尺寸 尺寸的测定》.pdf
  • DIN EN 1335-2-2010 Office furniture - Office work chair - Part 2 Safety requirements German version EN 1335-2 2009《办公家具 办公椅 第2部分 安全要求 德文版本EN 1335-2-2009》.pdf DIN EN 1335-2-2010 Office furniture - Office work chair - Part 2 Safety requirements German version EN 1335-2 2009《办公家具 办公椅 第2部分 安全要求 德文版本EN 1335-2-2009》.pdf
  • DIN EN 1335-3-2009 Office furniture - Office work chair - Part 3 Test methods English version of DIN EN 1335-3 2009-08《办公家具 办公椅 第3部分 安全试验方法 英文版本DIN EN 1335-3-2009-08》.pdf DIN EN 1335-3-2009 Office furniture - Office work chair - Part 3 Test methods English version of DIN EN 1335-3 2009-08《办公家具 办公椅 第3部分 安全试验方法 英文版本DIN EN 1335-3-2009-08》.pdf
  • DIN EN 13352-2012 Specification for the performance of automatic tank contents gauges German version EN 13352 2012《自动罐装容量量规性能规范》.pdf DIN EN 13352-2012 Specification for the performance of automatic tank contents gauges German version EN 13352 2012《自动罐装容量量规性能规范》.pdf
  • DIN EN 13353-2011 Solid wood panels (SWP) - Requirements German version EN 13353 2008+A1 2011《实木板材(SWP) 要求 德文版本EN 13353-2008+A1-2011》.pdf DIN EN 13353-2011 Solid wood panels (SWP) - Requirements German version EN 13353 2008+A1 2011《实木板材(SWP) 要求 德文版本EN 13353-2008+A1-2011》.pdf
  • DIN EN 13354-2009 Solid wood panels (SWP) - Bonding quality - Test method English version of DIN EN 13354 2009-02《实心木板(SWP) 粘接质量 试验方法》.pdf DIN EN 13354-2009 Solid wood panels (SWP) - Bonding quality - Test method English version of DIN EN 13354 2009-02《实心木板(SWP) 粘接质量 试验方法》.pdf
  • DIN EN 13355-2010 Coating plants - Combined booths - Safety requirements German version EN 13355 2004+A1 2009《涂布设备 组合台的安全性要求 德文版本EN 13355-2004+A1-2009》.pdf DIN EN 13355-2010 Coating plants - Combined booths - Safety requirements German version EN 13355 2004+A1 2009《涂布设备 组合台的安全性要求 德文版本EN 13355-2004+A1-2009》.pdf
  • DIN EN 13356-2001 Visibility accessories for non-professional use - Test methods and requirements German version EN 13356 2001《非专业用高清晰度附件 试验方法和要求》.pdf DIN EN 13356-2001 Visibility accessories for non-professional use - Test methods and requirements German version EN 13356 2001《非专业用高清晰度附件 试验方法和要求》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1