1、 ETSI TS 1Universal Mobile TelUser Equipment (UE) ra(3GPP TS 25.1TECHNICAL SPECIFICATION125 101 V13.2.1 (2016elecommunications System (radio transmission and recep.101 version 13.2.1 Release 1316-05) (UMTS); eption (FDD) 13) ETSI ETSI TS 125 101 V13.2.1 (2016-05)13GPP TS 25.101 version 13.2.1 Releas
2、e 13Reference RTS/TSGR-0425101vd21 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notic
3、e The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizat
4、ion of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aw
5、are that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: h
6、ttps:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not
7、 be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the
8、benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 101 V13.2.1 (2016-05)23GPP TS 25.101 version 13.2.1 Rel
9、ease 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual P
10、roperty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR
11、searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been pr
12、oduced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference
13、between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause
14、 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 101 V13.2.1 (2016-05)33GPP TS 25.101 version 13.2.1 Release 13Contents Intellectual Property Rights 2g3For
15、eword . 2g3Modal verbs terminology 2g3Foreword . 14g31 Scope 15g32 References 15g33 Definitions, symbols and abbreviations . 15g33.1 Definitions 15g33.2 Abbreviations . 17g34 General . 19g34.1 Relationship between Minimum Requirements and Test Requirements 19g34.2 Power Classes . 19g34.3 Control and
16、 monitoring functions 19g34.3.1 Minimum requirement 20g34.4 RF requirements in later releases . 20g35 Frequency bands and channel arrangement 20g35.1 General . 20g35.2 Frequency bands . 20g35.3 TX-RX frequency separation . 23g35.4 Channel arrangement 24g35.4.1 Channel spacing 24g35.4.2 Channel raste
17、r . 24g35.4.3 Channel number 24g35.4.4 UARFCN 27g36 Transmitter characteristics . 28g36.1 General . 28g36.2 Transmit power 28g36.2.1 UE maximum output power 28g36.2.1A UE maximum output power for UL OLTD 30g36.2.1B UE maximum output power for UL CLTD 31g36.2.1C UE maximum output power for UL MIMO 32
18、g36.2.1D UE maximum output power for DB-DC-HSUPA 33g36.2.2 UE maximum output,power with HS-DPCCH and E-DCH . 34g36.2.2A UE maximum output,power for DC-HSUPA . 34g36.2.2B UE maximum output power with HS-DPCCH and E-DCH for UL OLTD 35g36.2.2C UE maximum output power with HS-DPCCH and E-DCH for UL CLTD
19、 36g36.2.2D UE maximum output power with HS-DPCCH and E-DCH for UL MIMO . 36g36.2.2E UE maximum output power for the band with HS-DPCCH and E-DCH for DB-DC-HSUPA 37g36.2.3 UE Relative code domain power accuracy . 37g36.2.3A UE Relative code domain power accuracy for DC-HSUPA . 38g36.2.3B UE Relative
20、 code domain power accuracy for UL OLTD 39g36.2.3C UE Relative code domain power accuracy for UL CLTD 39g36.2.3D UE Relative code domain power accuracy for UL MIMO . 39g36.2.3E UE Relative code domain power accuracy for DB-DC-HSUPA 39g36.3 Frequency Error 39g36.3A Frequency Error for DC-HSUPA . 39g3
21、6.3B Frequency error for UL OLTD . 39g36.3C Frequency error for UL CLTD . 40g36.3D Frequency error for UL MIMO 40g36.3E Frequency error for DB-DC-HSUPA . 40g36.4 Output power dynamics 40g3ETSI ETSI TS 125 101 V13.2.1 (2016-05)43GPP TS 25.101 version 13.2.1 Release 136.4.1 Open loop power control 40g
22、36.4.1.1 Minimum requirement 40g36.4.1.1A Additional requirement for DC-HSUPA . 40g36.4.1.1B Additional requirement for DB-DC-HSUPA 40g36.4.2 Inner loop power control in the uplink 41g36.4.2.1 Power control steps . 41g36.4.2.1.1 Minimum requirement . 41g36.4.2.1.1A Additional requirement for DC-HSUP
23、A . 42g36.4.2.1.1B Additional requirement for UL OLTD 43g36.4.2.1.1C Additional requirement for UL CLTD 43g36.4.2.1.1D Additional requirement for UL MIMO 43g36.4.2.1.1E Additional requirement for DB-DC-HSUPA 43g36.4.3 Minimum output power 43g36.4.3.1 Minimum requirement 43g36.4.3.1A Additional requi
24、rement for DC-HSUPA . 43g36.4.3.1B Additional requirement for UL OLTD 43g36.4.3.1C Additional requirement for UL CLTD 43g36.4.3.1D Additional requirement for UL MIMO . 43g36.4.3.1E Additional requirement for DB-DC-HSUPA 44g36.4.4 Out-of-synchronization handling of output power 44g36.4.4.1 Minimum re
25、quirement 44g36.4.4.1A Additional requirement for UL OLTD 44g36.4.4.1B Additional requirement for UL CLTD 44g36.4.4.1C Additional requirement for UL MIMO . 45g36.4.4.1D Additional requirement for DB-DC-HSUPA 45g36.4.4.2 Test case 45g36.4A Output pattern dynamics 47g36.4A.1 Out-of-quality handling of
26、 TPI applicability 47g36.4A.1.1 Minimum requirement 47g36.4A.1.2 Test case 47g36.5 Transmit ON/OFF power . 49g36.5.1 Transmit OFF power . 49g36.5.1.1 Minimum requirement 49g36.5.1.1A Additional requirement for DC-HSUPA . 49g36.5.1.1B Additional requirement for UL OLTD 50g36.5.1.1C Additional require
27、ment for UL CLTD 50g36.5.1.1D Additional requirement for UL MIMO . 50g36.5.1.1E Additional requirement for DB-DC-HSUPA 50g36.5.2 Transmit ON/OFF Time mask 50g36.5.2.1 Minimum requirement 50g36.5.2.1A Additional requirement for UL OLTD 53g36.5.2.1B Additional requirement for UL CLTD 53g36.5.2.1C Addi
28、tional requirement for UL MIMO . 53g36.5.2.1D Additional requirement for DB-DC-HSUPA operating simultaneously with CS . 53g36.5.3 Change of TFC . 53g36.5.3.1 Minimum requirement 54g36.5.3.1A Additional requirement for UL OLTD 55g36.5.3.1B Additional requirement for UL CLTD 55g36.5.3.1C Additional re
29、quirement for DB-DC-HSUPA operating simultaneously with CS . 56g36.5.4 Power setting in uplink compressed mode 56g36.5.4.1 Minimum requirement 56g36.5.4.1A Additional requirement for UL OLTD 57g36.5.4.1B Additional requirement for UL CLTD 57g36.5.4.1C Additional requirement for DB-DC-HSUPA 58g36.5.5
30、 HS-DPCCH. 58g36.5.5.1 Minimum requirement 58g36.5.5.1A Additional requirement for UL OLTD 60g36.5.5.1B Additional requirement for UL CLTD 60g36.5.5.1C Additional requirement for UL MIMO . 60g36.5.5.1D Additional requirement for DB-DC-HSUPA 60g36.6 Output RF spectrum emissions . 60g36.6.1 Occupied b
31、andwidth . 60g3ETSI ETSI TS 125 101 V13.2.1 (2016-05)53GPP TS 25.101 version 13.2.1 Release 136.6.1A Occupied bandwidth for DC-HSUPA . 61g36.6.1B Occupied bandwidth for UL OLTD 61g36.6.1C Occupied bandwidth for UL CLTD 61g36.6.1D Occupied bandwidth for UL MIMO . 61g36.6.1E Occupied bandwidth for DB-
32、DC-HSUPA 61g36.6.2 Out of band emission 61g36.6.2.1 Spectrum emission mask . 61g36.6.2.1.1 Minimum requirement. 62g36.6.2.1A Additional Spectrum emission mask for DC-HSUPA 63g36.6.2.1A.1 Minimum requirement . 63g36.6.2.1A.2 Additional requirement for band II, IV, V, X, XXV and XXVI 63g36.6.2.1B Addi
33、tional requirement for UL OLTD 64g36.6.2.1C Additional requirement for UL CLTD 64g36.6.2.1D Additional requirement for UL MIMO . 64g36.6.2.1E Additional requirement for DB-DC-HSUPA 64g36.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 64g36.6.2.2.1 Minimum requirement . 64g36.6.2.2.1A Additional
34、 requirement for DC-HSUPA . 65g36.6.2.2.1B Additional requirement for UL OLTD 65g36.6.2.2.1C Additional requirement for UL CLTD 65g36.6.2.2.1D Additional requirement for UL MIMO 65g36.6.2.2.1E Additional requirement for DB-DC-HSUPA 65g36.6.3 Spurious emissions . 65g36.6.3.1 Minimum requirement 65g36
35、.6.3.1.1 Additional requirement 72g36.6.3.1A Additional requirement for DC-HSUPA . 73g36.6.3.1A.1 Additional requirement for DC-HSUPA . 78g36.6.3.1B Additional requirement for UL OLTD 79g36.6.3.1C Additional requirement for UL CLTD 79g36.6.3.1D Additional requirement for UL MIMO . 79g36.6.3.1E Addit
36、ional requirement for DB-DC-HSUPA 79g36.7 Transmit intermodulation . 81g36.7.1 Minimum requirement 81g36.7.1A Additional requirement for DC-HSUPA. 81g36.7.1B Additional requirement for UL OLTD 81g36.7.1C Additional requirement for UL CLTD 81g36.7.1D Additional requirement for UL MIMO . 81g36.7.1E Ad
37、ditional requirement for DB-DC-HSUPA 81g36.8 Transmit modulation 82g36.8.1 Transmit pulse shape filter 82g36.8.1A Additional requirement for UL OLTD 82g36.8.1B Additional requirement for UL CLTD 82g36.8.1C Additional requirement for UL MIMO . 82g36.8.1D Additional requirement for DB-DC-HSUPA 82g36.8
38、.2 Error Vector Magnitude 82g36.8.2.1 Minimum requirement 83g36.8.2.1A Additional requirement for DC-HSUPA . 83g36.8.2.1B Additional requirement for UL OLTD 84g36.8.2.1C Additional requirement for UL CLTD 84g36.8.2.1D Additional requirement for UL MIMO . 84g36.8.2.1E Additional requirement for DB-DC
39、-HSUPA 85g36.8.3 Peak code domain error 85g36.8.3.1 Minimum requirement 85g36.8.3.1A Additional requirement for UL OLTD 85g36.8.3.1B Additional requirement for UL CLTD 85g36.8.3.1C Additional requirement for DB-DC-HSUPA operating simultaneously with CS . 85g36.8.3a Relative code domain error . 86g36
40、.8.3a.1 Relative Code Domain Error . 86g36.8.3a.1.1 Minimum requirement. 86g36.8.3a.1.1a Additional requirement for DC-HSUPA . 87g36.8.3a.1.1b Additional requirement for UL OLTD 87g36.8.3a.1.1c Additional requirement for UL CLTD 87g3ETSI ETSI TS 125 101 V13.2.1 (2016-05)63GPP TS 25.101 version 13.2.
41、1 Release 136.8.3a.1.1d Additional requirement for UL MIMO 87g36.8.3a.1.1e Additional requirement for DB-DC-HSUPA 87g36.8.3b In-band emission for DC-HSUPA 87g36.8.3b.1 Minimum requirement for DC-HSUPA 88g36.8.4 Phase discontinuity for uplink DPCH . 88g36.8.4.1 Minimum requirement 88g36.8.4.1A Additi
42、onal requirement for UL OLTD 88g36.8.4.1B Additional requirement for UL CLTD 89g36.8.4.1C Additional requirement for DB-DC-HSUPA 89g36.8.5 Phase discontinuity for HS-DPCCH . 89g36.8.5.1 Minimum requirement 89g36.8.5.1A Additional requirement for UL OLTD 89g36.8.5.1B Additional requirement for UL CLT
43、D 89g36.8.6 Phase discontinuity for E-DCH 90g36.8.6.1 Minimum requirement 90g36.8.6.1A Additional requirement for UL OLTD 91g36.8.6.1B Additional requirement for UL CLTD 91g36.8.6.1C Additional requirement for DB-DC-HSUPA 91g36.8.7 Time alignment error for DC-HSUPA 91g36.8.7.1 Minimum requirement 91
44、g36.8.7A Time alignment error for UL OLTD . 91g36.8.7A.1 Minimum requirement 91g36.8.7B Time alignment error for UL CLTD . 91g36.8.7B.1 Minimum requirement 91g36.8.7C Time alignment error for UL MIMO 92g36.8.7C.1 Minimum requirement 92g36.8.7D Time alignment error for DB-DC-HSUPA . 92g36.8.7D.1 Mini
45、mum requirement 92g37 Receiver characteristics 92g37.1 General . 92g37.2 Diversity characteristics . 93g37.3 Reference sensitivity level 93g37.3.1 Minimum requirement 94g37.3.2 Additional requirement for DC-HSDPA. 95g37.3.3 Additional requirement for DB-DC-HSDPA 97g37.3.4 Additional requirement for
46、single band 4C-HSDPA 98g37.3.5 Additional requirement for dual band 4C-HSDPA . 99g37.3.6 Additional requirement for single band 8C-HSDPA 99g37.3.7 Additional requirement for single band NC-4C-HSDPA . 100g37.4 Maximum input level . 101g37.4.1 Minimum requirement for DPCH reception . 101g37.4.2 Minimu
47、m requirement for HS-PDSCH reception . 101g37.4.2.1 Minimum requirement for 16QAM . 101g37.4.2.2 Minimum requirement for 64QAM . 102g37.4.3 Additional requirement for DC-HSDPA and DB-DC-HSDPA 103g37.4.3.1 Additional requirement for 16QAM 103g37.4.3.2 Additional requirement for 64QAM 103g37.4.4 Addit
48、ional requirement for single band/dual band 4C-HSDPA or single band 8C-HSDPA and single band NC-4C-HSDPA 104g37.4.4.1 Additional requirement for 16QAM 104g37.4.4.2 Additional requirement for 64QAM 105g37.5 Adjacent Channel Selectivity (ACS) 105g37.5.1 Minimum requirement 106g37.5.2 Additional requir
49、ement for DC-HSDPA and DB-DC-HSDPA 106g37.5.3 Additional requirement for single band/dual band 4C-HSDPA 107g37.5.4 Additional requirement for single band 8C-HSDPA 110g37.5.5 Additional requirement for single band NC-4C-HSDPA . 111g37.6 Blocking characteristics . 112g37.6.1 Minimum requirement (In-band blocking) . 113g37.6.1A Additional requirement for DC-HSDPA and DB-DC-HSDPA (In-band blocking) . 114g37.6.1B Additional requirement for DC-HSUPA (In-band blocking) 116g3ETSI ETSI TS 125 101 V13.2.1 (2016-05)73GPP TS 25.101 version 13.2.1 Release 137.6.1C Additional requirement f
