1、 ETSI TS 125 104 V15.3.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 15.3.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 104 V15.3.0 (2018-07)13GPP TS 25.104 version 15.3.0 Release 15Reference R
2、TS/TSGR-0425104vf30 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present d
3、ocument can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In
4、 case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the do
5、cument may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:
6、/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be m
7、odified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trade
8、marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 104 V15.3.0 (2018-07)23GPP TS 25.104 version 15.3
9、.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI S
10、R 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no inv
11、estigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present docum
12、ent may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks
13、in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical spec
14、ifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Mo
15、dal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are
16、 NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 104 V15.3.0 (2018-07)33GPP TS 25.104 version 15.3.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions and abbreviat
17、ions . 8g33.1 Definitions . 8g33.2 Abbreviations 11g33.3 Symbols . 11g34 General . 12g34.1 Relationship between Minimum Requirements and Test Requirements . 12g34.2 Base station classes . 12g34.3 Regional requirements . 13g34.4 Environmental requirements for the BS equipment 15g34.5 Applicability of
18、 requirements 15g34.6 Requirements for contiguous and non-contiguous spectrum . 15g34.7 Requirements for BS capable of multi-band operation . 15g35 Frequency bands and channel arrangement 16g35.1 General 16g35.2 Frequency bands 16g35.3 Tx-Rx frequency separation 18g35.4 Channel arrangement . 19g35.4
19、.1 Channel spacing . 19g35.4.2 Channel raster 20g35.4.3 Channel number. 20g36 Transmitter characteristics . 21g36.1 General 21g36.2 Base station output power . 22g36.2.1 Base station maximum output power . 22g36.2.1.1 Minimum requirement . 22g36.3 Frequency error . 23g36.3.1 Minimum requirement . 23
20、g36.4 Output power dynamics . 23g36.4.1 Inner loop power control in the downlink 23g36.4.1.1 Power control steps 23g36.4.1.1.1 Minimum requirement 23g36.4.2 Power control dynamic range 24g36.4.2.1 Minimum requirements 24g36.4.3 Total power dynamic range . 24g36.4.3.1 Minimum requirement . 24g36.4.4
21、Primary CPICH power . 24g36.4.4.1 Minimum requirement . 24g36.4.4A Secondary CPICH power . 24g36.4.4A.1 Minimum Requirement for MIMO mode 24g36.4.4A.2 Minimum Requirement for MIMO mode with four transmit antennas 25g36.4.4B Demodulation CPICH power for MIMO mode with four transmit antennas . 25g36.4
22、.4B.1 Minimum Requirement 25g36.4.5 IPDL time mask. 25g36.4.5.1 Minimum Requirement 25g36.4.6 Home base station output power for adjacent channel protection 26g36.4.6.1 Minimum requirement . 27g36.5 (void) . 27g3ETSI ETSI TS 125 104 V15.3.0 (2018-07)43GPP TS 25.104 version 15.3.0 Release 156.6 Outpu
23、t RF spectrum emissions 27g36.6.1 Occupied bandwidth 27g36.6.1.1 Minimum requirement . 27g36.6.2 Out of band emission . 27g36.6.2.1 Spectrum emission mask 27g36.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) 33g36.6.2.2.1 Minimum requirement 33g36.6.2.2.2 Cumulative ACLR requirement in non-contig
24、uous spectrum 34g36.6.3 Spurious emissions 35g36.6.3.1 Mandatory Requirements . 35g36.6.3.1.1 Spurious emissions (Category A) . 35g36.6.3.1.2 Spurious emissions (Category B) . 36g36.6.3.2 Protection of the BS receiver of own or different BS 37g36.6.3.2.1 Minimum Requirement 37g36.6.3.3 Co-existence
25、with other systems in the same geographical area 39g36.6.3.3.1 Minimum Requirements . 39g36.6.3.4 Co-existence with co-located and co-sited base stations 44g36.6.3.4.1 Minimum Requirements . 44g36.6.3.5 Co-existence with PHS 53g36.6.3.5.1 Minimum Requirement 53g36.6.3.6 Co-existence with services in
26、 adjacent frequency bands 53g36.6.3.6.1 Minimum requirement 54g36.6.3.7 (Void) . 54g36.6.3.8 Protection of Public Safety Operations 54g36.6.3.8.1 Minimum Requirement 54g36.6.3.9 Co-existence with Home BS operating in other bands . 54g36.6.3.9.1 Minimum Requirements . 55g36.7 Transmitter intermodulat
27、ion 57g36.7.1 Minimum requirement . 57g36.8 Transmit modulation . 57g36.8.1 Transmit pulse shape filter . 58g36.8.2 Error Vector Magnitude . 58g36.8.2.1 Minimum requirement . 58g36.8.3 Peak code Domain error 58g36.8.3.1 Minimum requirement . 58g36.8.4 Time alignment error . 58g36.8.4.1 Minimum Requi
28、rements . 59g36.8.5 Relative Code Domain Error for 64QAM modulation 59g36.8.5.1 Minimum requirement . 59g37 Receiver characteristics 59g37.1 General 59g37.2 Reference sensitivity level . 60g37.2.1 Minimum requirement . 60g37.2.2 Maximum Frequency Deviation for Receiver Performance 60g37.3 Dynamic ra
29、nge 60g37.3.1 Minimum requirement . 60g37.4 Adjacent Channel Selectivity (ACS) . 60g37.4.1 Minimum requirement . 61g37.4.2 Minimum requirement - Co-location with UTRA-TDD 61g37.5 Blocking characteristics 61g37.5.1 Minimum requirement . 61g37.5.2 Minimum Requirement - Co-location with GSM, DCS, PCS,
30、CDMA, UTRA and/or E-UTRA, UTRA TDD and/or E-UTRA TDD . 72g37.5.3 Void . 82g37.6 Intermodulation characteristics . 82g37.6.1 Minimum requirement . 83g37.7 Spurious emissions 84g37.7.1 Minimum requirement . 85g38 Performance requirement . 85g38.1 General 85g3ETSI ETSI TS 125 104 V15.3.0 (2018-07)53GPP
31、 TS 25.104 version 15.3.0 Release 158.2 Demodulation in static propagation conditions . 86g38.2.1 Demodulation of DCH . 86g38.2.1.1 Minimum requirement . 86g38.3 Demodulation of DCH in multipath fading conditions . 87g38.3.1 Multipath fading Case 1 . 87g38.3.1.1 Minimum requirement . 87g38.3.2 Multi
32、path fading Case 2 . 87g38.3.2.1 Minimum requirement . 87g38.3.3 Multipath fading Case 3 . 88g38.3.3.1 Minimum requirement . 88g38.3.4 Multipath fading Case 4 . 88g38.3.4.1 Minimum requirement . 89g38.4 Demodulation of DCH in moving propagation conditions 89g38.4.1 Minimum requirement . 89g38.5 Demo
33、dulation of DCH in birth/death propagation conditions . 89g38.5.1 Minimum requirement . 90g38.5A Demodulation of DCH in high speed train conditions 90g38.5A.1 General . 90g38.5A.2 Minimum requirement . 90g38.6 (void) . 90g38.7 Performance requirement for RACH . 90g38.7.1 Performance requirement for
34、RACH preamble detection 90g38.7.2 Demodulation of RACH message 91g38.7.2.1 Minimum requirements for Static Propagation Condition . 91g38.7.2.2 Minimum requirements for Multipath Fading Case 3 91g38.7.2.3 Minimum requirements for high speed train conditions 92g38.8 (void) . 92g38.9 (void) . 92g38.10
35、Performance of ACK/NACK detection for HS-DPCCH . 92g38.10.1 ACK false alarm 92g38.10.2 ACK mis-detection 93g38.10A Performance of ACK/NACK detection for 4C-HSDPA HS-DPCCH . 93g38.10A.1 Performance requirements . 93g38.10A.1.1 ACK false alarm . 93g38.10A.1.2 ACK mis-detection. 94g38.10A.2 Applicabili
36、ty of requirements 94g38.10B Performance of ACK/NACK detection for 8C-HSDPA HS-DPCCH . 95g38.11 Demodulation of E-DPDCH in multipath fading condition 95g38.11A Demodulation of E-DPDCH and S-E-DPDCH in multipath fading condition for UL MIMO 96g38.12 Performance of signaling detection for E-DPCCH in m
37、ultipath fading condition 97g3Annex A (normative): Measurement channels 98g3A.1 Summary of UL reference measurement channels . 98g3A.2 UL reference measurement channel for 12.2 kbps . 99g3A.3 UL reference measurement channel for 64 kbps 100g3A.4 UL reference measurement channel for 144 kbps 101g3A.5
38、 UL reference measurement channel for 384 kbps 102g3A.6 (void) 102g3A.7 Reference measurement channels for UL RACH 103g3A.8 Reference measurement channel for HS-DPCCH 103g3A.8A Reference measurement channel for HS-DPCCH for 4C-HSDPA 104g3A.9 Summary of E-DPDCH Fixed reference channels . 105g3A.10 E-
39、DPDCH Fixed reference channel 1 (FRC1) . 105g3A.11 E-DPDCH Fixed reference channel 2 (FRC2) . 106g3ETSI ETSI TS 125 104 V15.3.0 (2018-07)63GPP TS 25.104 version 15.3.0 Release 15A.12 E-DPDCH Fixed reference channel 3 (FRC3) . 107g3A.13 E-DPDCH Fixed reference channel 4 (FRC4) . 108g3A.14 E-DPDCH Fix
40、ed reference channel 5 (FRC5) . 109g3A.15 E-DPDCH Fixed reference channel 6 (FRC6) . 110g3A.16 E-DPDCH Fixed reference channel 7 (FRC7) . 110g3A.17 E-DPDCH Fixed reference channel 8 (FRC8) . 111g3A.18 E-DPDCH Fixed reference channel 9 (FRC9) . 112g3A.19 E-DPDCH Fixed reference channel 10 (FRC10) . 1
41、13g3Annex B (normative): Propagation conditions 115g3B.1 Static propagation condition . 115g3B.2 Multi-path fading propagation conditions 115g3B.3 Moving propagation conditions 115g3B.4 Birth-Death propagation conditions . 116g3B.4A High speed train conditions 116g3B.5 Multipath fading propagation c
42、onditions for E-DPDCH and E-DPCCH . 119g3Annex C (normative): Characteristics of the W-CDMA interference signal 120g3Annex D (normative): Regional requirement for protection of DTT 121g3Annex E (informative): Change History 122g3History 127g3ETSI ETSI TS 125 104 V15.3.0 (2018-07)73GPP TS 25.104 vers
43、ion 15.3.0 Release 15Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG
44、with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all chan
45、ges of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification. ETSI ETSI TS 125 104 V15.3.0 (2018-07)83GPP TS 25.104 version 15.3.0 Release 151 Scope This document establishes the Bas
46、e Station minimum RF characteristics of the FDD mode of UTRA. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. g404 References are either specific (identified by date of publication, edition number, version
47、number, etc.) or non-specific. g404 For a specific reference, subsequent revisions do not apply. g404 For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version o
48、f that document in the same Release as the present document. 1 ITU-R Recommendation SM.329, “ Unwanted emissions in the spurious domain “. 2 (void) 3 ETSI ETR 273-1-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) a
49、nd evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes“. 4 3GPP TR 25.942 “RF System Scenarios“. 5 3GPP TS 45.004: “Digital cellular telecommunications system (Phase 2+); Modulation“. 6 3GPP TS 25.213: “Spreading and modulation (FDD)“. 7 ITU-R recommendation SM.328: “Spectra and bandwidth of emissions“. 8 3GPP TS 36.104: “ Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception“. 9 ECC/DEC/
