1、 ETSI TS 12Universal Mobile TelBase Station (B(3GPP TS 25.14TECHNICAL SPECIFICATION125 141 V11.12.0 (201elecommunications System (BS) conformance testing (FD.141 version 11.12.0 Release 1016-01) (UMTS); FDD) 11) ETSI ETSI TS 125 141 V11.12.0 (2016-01)13GPP TS 25.141 version 11.12.0 Release 11Referen
2、ce RTS/TSGR-0425141vbc0 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The prese
3、nt document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI
4、. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that th
5、e document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/porta
6、l.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modifie
7、d without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of
8、its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 141 V11.12.0 (2016-01)23GPP TS 25.141 version 11.12.0 Release 11In
9、tellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property R
10、ights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches,
11、 has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by
12、 ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between G
13、SM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of t
14、he ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 141 V11.12.0 (2016-01)33GPP TS 25.141 version 11.12.0 Release 11Contents Intellectual Property Rights 2g3Foreword .
15、 2g3Modal verbs terminology 2g3Foreword . 15g31 Scope 16g32 References 16g33 Definitions and abbreviations . 17g33.1 Definitions 17g33.2 Symbols 19g33.3 Abbreviations . 20g33.4 Radio Frequency bands 21g33.4.1 Frequency bands . 21g33.4.2 TX-RX frequency separation 23g33.5 Channel arrangement 24g33.5.
16、1 Channel spacing 24g33.5.2 Channel raster . 24g33.5.3 Channel number 24g34 General test conditions and declarations 25g34.1 Acceptable uncertainty of Test System 26g34.1.1 Measurement of test environments . 26g34.1.2 Measurement of transmitter 27g34.1.3 Measurement of receiver 29g34.1.4 Measurement
17、 of performance requirement . 30g34.2 Test Tolerances (informative) 31g34.2.1 Transmitter 32g34.2.2 Receiver 32g34.2.3 Performance requirement 33g34.2.4 RRM measurements 33g34.3 Interpretation of measurement results 33g34.3A Base station classes 34g34.4 Test environments 34g34.4.1 Normal test enviro
18、nment 34g34.4.2 Extreme test environment . 34g34.4.2.1 Extreme temperature . 35g34.4.3 Vibration . 35g34.4.4 Power supply 35g34.4.5 Definition of Additive White Gaussian Noise (AWGN) Interferer 35g34.5 Selection of configurations for testing 35g34.6 BS Configurations 36g34.6.1 Receiver diversity . 3
19、6g34.6.2 Duplexers 36g34.6.3 Power supply options 36g34.6.4 Ancillary RF amplifiers 37g34.6.5 BS using antenna arrays 37g34.6.5.1 Receiver tests 38g34.6.5.2 Transmitter tests 38g34.6.6 Transmit diversity and MIMO transmission . 38g34.6.7 BS with integrated Iuant BS modem 39g34.6.8 BS with Virtual An
20、tenna Mapping . 39g34.7 Regional requirements 40g34.8 Specified frequency range 42g34.8.1 Base Station RF Bandwidth position for non-single carrier testing 42g34.9 Applicability of requirements . 43g3ETSI ETSI TS 125 141 V11.12.0 (2016-01)43GPP TS 25.141 version 11.12.0 Release 114.10 Requirements f
21、or contiguous and non-contiguous spectrum 43g34.11 Manufacturer“s declarations of regional and optional requirements 43g34.11.1 Operating band and frequency range 43g34.11.2 Spurious emissions category . 43g34.11.3 Additional out of band emissions . 44g34.11.4 Co-existence with other systems . 44g34
22、.11.5 Co-location with other base stations . 44g34.11.6 Manufacturers declarations of supported RF configurations . 44g34.12 Test configuration for multi-carrier operations 45g34.12.1 UTC1: Contiguous spectrum operation test configuration . 46g34.12.1.1 UTC1 power allocation . 46g34.12.2 UTC2: Non-c
23、ontiguous spectrum operation test configuration 46g34.12.2.1 UTC2 power allocation . 46g34.12.3 Multi-band operation test configurations 46g34.12.3.1 UTC3: Multi-band test configuration for full carrier allocation 46g34.12.3.1.1 UTC3 power allocation . 47g34.12.3.2 UTC4: Multi-band test configuratio
24、n with high PSD per carrier 47g34.12.3.2.1 UTC4 power allocation . 48g34.12.4 Applicability of test configurations 48g34.13 Requirements for BS capable of multi-band operation 50g35 Format and interpretation of tests . 51g36 Transmitter . 51g36.1 General . 51g36.1.1 Test Models 52g36.1.1.1 Test Mode
25、l 1 TM1 . 52g36.1.1.2 Test Model 2 TM2 . 55g36.1.1.3 Test Model 3 TM3 . 55g36.1.1.4 Test Model 4 TM4 . 56g36.1.1.4A Test Model 5 TM5 . 57g36.1.1.4B Test Model 6 TM6 . 58g36.1.1.5 DPCH Structure of the Downlink Test Models . 60g36.1.1.6 Common channel Structure of the Downlink Test Models . 61g36.1.1
26、.6.1 P-CCPCH 61g36.1.1.6.2 PICH 61g36.1.1.6.3 Primary scrambling code and SCH 61g36.1.1.6.4 S-CCPCH containing PCH 61g36.1.1.7 HS-PDSCH Structure of the Downlink TM5 62g36.1.1.8 HS-SCCH Structure of the Downlink Test Models 5 and 6 62g36.1.1.9 HS-PDSCH Structure of the Downlink TM6 62g36.2 Base stat
27、ion output power 62g36.2.1 Base station maximum output power 62g36.2.1.1 Definition and applicability . 62g36.2.1.2 Minimum Requirement . 63g36.2.1.3 Test purpose 63g36.2.1.4 Method of test . 63g36.2.1.4.1 Initial conditions 63g36.2.1.4.2 Procedure . 63g36.2.1.5 Test Requirements . 64g36.2.2 Primary
28、 CPICH power accuracy . 64g36.2.2.1 Definition and applicability . 64g36.2.2.2 Minimum Requirement . 64g36.2.2.3 Test purpose 64g36.2.2.4 Method of test . 64g36.2.2.4.1 Initial conditions 64g36.2.2.4.2 Procedure . 64g36.2.2.5 Test Requirement 65g36.2.3 Secondary CPICH power offset accuracy . 65g36.2
29、.3.1 Definition and applicability . 65g36.2.3.2 Minimum Requirement . 65g36.2.3.3 Test purpose 65g3ETSI ETSI TS 125 141 V11.12.0 (2016-01)53GPP TS 25.141 version 11.12.0 Release 116.2.3.4 Method of test for MIMO mode 65g36.2.3.4.1 Initial conditions 65g36.2.3.4.2 Procedure . 65g36.2.3.4A Method of t
30、est for MIMO mode with four transmit antennas . 66g36.2.3.4A.1 Initial conditions 66g36.2.3.4A.2 Procedure . 66g36.2.3.5 Test Requirement for MIMO mode 66g36.2.3.5A Test Requirement for MIMO mode with four transmit antennas 66g36.3 Frequency error 67g36.3.1 Definition and applicability 67g36.3.2 Min
31、imum Requirement . 67g36.3.3 Test purpose 67g36.3.4 Method of test . 67g36.3.5 Test requirement . 67g36.4 Output power dynamics 67g36.4.1 Inner loop power control . 67g36.4.2 Power control steps . 67g36.4.2.1 Definition and applicability . 68g36.4.2.2 Minimum Requirement . 68g36.4.2.3 Test purpose 6
32、8g36.4.2.4 Method of test . 68g36.4.2.4.1 Initial conditions 68g36.4.2.4.2 Procedure . 68g36.4.2.5 Test requirement . 69g36.4.3 Power control dynamic range . 69g36.4.3.1 Definition and applicability . 69g36.4.3.2 Minimum Requirement . 69g36.4.3.3 Test purpose 69g36.4.3.4 Method of test . 69g36.4.3.4
33、.1 Initial conditions 69g36.4.3.4.2 Procedure . 70g36.4.3.5 Test requirement . 70g36.4.4 Total power dynamic range 70g36.4.4.1 Definition and applicability . 70g36.4.4.2 Minimum Requirement . 70g36.4.4.3 Test purpose 70g36.4.4.4 Method of test . 70g36.4.4.4.1 Initial Conditions . 70g36.4.4.4.2 Proce
34、dure . 71g36.4.4.5 Test requirement . 71g36.4.5 IPDL time mask 71g36.4.5.1 Definition and applicability . 71g36.4.5.2 Minimum Requirement . 71g36.4.5.3 Test purpose 71g36.4.5.4 Method of test . 71g36.4.5.4.1 Initial conditions 71g36.4.5.4.2 Procedure . 72g36.4.5.5 Test Requirements . 72g36.4.6 Home
35、base station output power for adjacent channel protection . 72g36.4.6.1 Definition and applicability . 72g36.4.6.2 Minimum Requirement . 73g36.4.6.3 Test purpose 73g36.4.6.4 Method of test . 73g36.4.6.4.1 Initial conditions 73g36.4.6.4.2 Procedure . 74g36.4.6.5 Test Requirements . 74g36.5 Output RF
36、spectrum emissions . 74g36.5.1 Occupied bandwidth . 74g36.5.1.1 Definition and applicability . 74g36.5.1.2 Minimum Requirements 75g36.5.1.3 Test purpose 75g36.5.1.4 Method of test . 75g3ETSI ETSI TS 125 141 V11.12.0 (2016-01)63GPP TS 25.141 version 11.12.0 Release 116.5.1.4.1 Initial conditions 75g3
37、6.5.1.4.2 Procedure . 75g36.5.1.5 Test requirements 76g36.5.2 Out of band emission 76g36.5.2.1 Spectrum emission mask . 76g36.5.2.1.1 Definitions and applicability . 76g36.5.2.1.2 Minimum Requirements 76g36.5.2.1.3 Test purpose 76g36.5.2.1.4 Method of test 76g36.5.2.1.4.1 Initial conditions 76g36.5.
38、2.1.4.2 Procedures . 77g36.5.2.1.5 Test requirements 77g36.5.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 84g36.5.2.2.1 Definition and applicability . 84g36.5.2.2.2 Minimum Requirement . 84g36.5.2.2.3 Test purpose 84g36.5.2.2.4 Method of test 84g36.5.2.2.4.1 Initial conditions 84g36.5.2.2.4.2 P
39、rocedure . 85g36.5.2.2.5 Test Requirement. 85g36.5.2.2.6 Cumulative ACLR test requirement in non-contiguous spectrum or multiple-bands 86g36.5.3 Spurious emissions . 87g36.5.3.1 Definition and applicability . 87g36.5.3.2 (void) . 88g36.5.3.3 (void) . 88g36.5.3.4 Minimum Requirements 88g36.5.3.5 Test
40、 purpose 88g36.5.3.6 Method of Test 88g36.5.3.6.1 Initial conditions 88g36.5.3.6.2 Procedure . 89g36.5.3.7 Test requirements 89g36.5.3.7.1 Spurious emissions (Category A) 89g36.5.3.7.2 Spurious emissions (Category B) 89g36.5.3.7.3 Protection of the BS receiver of own or different BS 90g36.5.3.7.4 Co
41、-existence with other systems in the same geographical area . 92g36.5.3.7.5 Co-existence with co-located and co-sited base stations . 96g36.5.3.7.6 Co-existence with PHS 102g36.5.3.7.7 Co-existence with services in adjacent frequency bands . 102g36.5.3.7.8 Void . 102g36.5.3.7.8.1 Void . 102g36.5.3.7
42、.8.2 Void . 102g36.5.3.7.9 Protection of Public Safety Operations 102g36.5.3.7.10 Co-existence with Home BS operating in other bands 103g36.6 Transmitter intermodulation . 105g36.6.1 Definition and applicability 105g36.6.2 Minimum Requirement . 105g36.6.3 Test purpose 105g36.6.4 Method of test . 105
43、g36.6.4.1 Initial conditions . 105g36.6.4.2 Procedures . 106g36.6.5 Test Requirements 106g36.7 Transmit modulation 107g36.7.1 Error Vector Magnitude 107g36.7.1.1 Definition and applicability . 107g36.7.1.2 Minimum Requirement . 107g36.7.1.3 Test Purpose 107g36.7.1.4 Method of Test 107g36.7.1.4.1 Ini
44、tial Conditions . 107g36.7.1.4.2 Procedure . 107g36.7.1.5 Test Requirement 108g36.7.2 Peak Code Domain Error 108g36.7.2.1 Definition and applicability . 108g3ETSI ETSI TS 125 141 V11.12.0 (2016-01)73GPP TS 25.141 version 11.12.0 Release 116.7.2.2 Minimum requirement 108g36.7.2.3 Test Purpose 108g36.
45、7.2.4 Method of test . 108g36.7.2.4.1 Initial conditions 108g36.7.2.4.2 Procedure . 109g36.7.2.5 Test requirement . 109g36.7.3 Time alignment error 109g36.7.3.1 Definition and applicability . 109g36.7.3.2 Minimum Requirement . 109g36.7.3.3 Test Purpose 109g36.7.3.4 Method of Test 109g36.7.3.4.1 Init
46、ial Conditions . 109g36.7.3.4.2 Procedure . 110g36.7.3.5 Test Requirement 110g36.7.4 Relative Code Domain Error 110g36.7.4.1 Definition and applicability . 110g36.7.4.2 Minimum requirement 110g36.7.4.3 Test Purpose 110g36.7.4.4 Method of test . 111g36.7.4.4.1 Initial conditions 111g36.7.4.4.2 Proced
47、ure . 111g36.7.4.5 Test requirement . 111g37 Receiver characteristics 111g37.1 General . 111g37.2 Reference sensitivity level 112g37.2.1 Definition and applicability 112g37.2.2 Minimum Requirement . 112g37.2.3 Test purpose 112g37.2.4 Method of testing 113g37.2.4.1 Initial conditions . 113g37.2.4.2 P
48、rocedure 113g37.2.5 Test requirement . 113g37.3 Dynamic range . 114g37.3.1 Definition and applicability 114g37.3.2 Minimum Requirement . 114g37.3.3 Test purpose 114g37.3.4 Method of test . 114g37.3.4.1 Initial conditions . 114g37.3.4.2 Procedure 114g37.3.5 Test Requirements 114g37.4 Adjacent Channel
49、 Selectivity (ACS) 115g37.4.1 Definition and applicability 115g37.4.2 Minimum Requirement . 115g37.4.3 Test purpose 115g37.4.4 Method of test . 115g37.4.4.1 Initial conditions . 115g37.4.4.2 Procedure 115g37.4.5 Test Requirements 116g37.5 Blocking characteristics . 116g37.5.1 Definition and applicability 116g37.5.2 Minimum Requirements . 116g37.5.3 Test purpose 117g37.5.4 Method of test . 117g37.5.4.1 Initial conditions . 117g37.5.4.2 Procedure 118g37.5.5 Test Requirements 118g37.6 Intermodulation characteristics 131g37.6.1 Definition and applicability 131g37.6.
