1、 ETSI TS 125 214 V14.1.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Physical layer procedures (FDD) (3GPP TS 25.214 version 14.1.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 214 V14.1.0 (2017-04)13GPP TS 25.214 version 14.1.0 Release 14Reference RTS/TSGR-0125214ve10 Keywo
2、rds UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded
3、 from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or
4、perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to
5、revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/C
6、ommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the writt
7、en authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM
8、 and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 214 V14.1.0 (2017-04)23GPP TS 25.214 version 14.1.0 Release 14Intellectual Property R
9、ights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essenti
10、al, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out
11、 by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation
12、Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ET
13、SI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rule
14、s (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 214 V14.1.0 (2017-04)33GPP TS 25.214 version 14.1.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs termino
15、logy 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 10g34 Synchronization procedures . 11g34.1 Cell search 11g34.2 Common physical channel synchronization . 11g34.2.1 P-CCPCH radio frame timing . 11g34.2.2 S-CCPCH soft combinin
16、g timing . 11g34.2.3 Radio frame timing on the MBSFN layer . 12g34.2.4 Secondary serving HS-DSCH cell timing . 12g34.2.5 HS-DSCH cell timing when Multiflow is configured . 12g34.3 DPCCH/DPDCH/F-DPCH synchronization 12g34.3.1 Synchronization primitives . 12g34.3.1.1 General 12g34.3.1.2 Downlink synch
17、ronization primitives . 12g34.3.1.3 Uplink synchronization primitives 14g34.3.2 Radio link establishment and physical layer reconfiguration for dedicated channels . 14g34.3.2.1 General 14g34.3.2.2 Node B radio link set state machine 15g34.3.2.3 Synchronization procedure A 15g34.3.2.3A Synchronizatio
18、n procedure AA . 17g34.3.2.4 Synchronization procedure B 17g34.3.3 Radio link monitoring . 18g34.3.3.1 Downlink radio link failure . 18g34.3.3.2 Uplink radio link failure/restore in CELL_DCH state 18g34.3.3.2A Uplink radio link failure/restore in CELL_FACH state and IDLE mode . 18g34.3.4 Transmissio
19、n timing adjustments . 18g35 Power control . 19g35.1 Uplink power control 19g35.1.1 PRACH . 19g35.1.1.1 General 19g35.1.1.2 Setting of PRACH control and data part power difference . 19g35.1.2 DPCCH/DPDCH/DPCCH2 19g35.1.2.1 General 19g35.1.2.2 Ordinary transmit power control . 20g35.1.2.2.1 General 2
20、0g35.1.2.2.2 Algorithm 1 for processing TPC commands . 22g35.1.2.2.3 Algorithm 2 for processing TPC commands . 23g35.1.2.2.4 Algorithm 3 for processing TPC commands . 24g35.1.2.2A Ordinary transmit power control for DPCCH2 . 25g35.1.2.3 Transmit power control in compressed mode . 26g35.1.2.3A Transm
21、it power control in compressed mode for DPCCH2 28g35.1.2.4 Transmit power control in the uplink DPCCH power control preamble . 29g35.1.2.5 Setting of the uplink DPCCH/DPDCH relative powers 29g35.1.2.5.1 General 29g35.1.2.5.2 Signalled gain factors 30g35.1.2.5.3 Computed gain factors . 30g3ETSI ETSI
22、TS 125 214 V14.1.0 (2017-04)43GPP TS 25.214 version 14.1.0 Release 145.1.2.5.4 Setting of the uplink DPCCH/DPDCH relative powers in compressed mode . 30g35.1.2.5A Setting of the uplink HS-DPCCH power relative to DPCCH or DPCCH2 power 31g35.1.2.5B Setting of the uplink E-DPCCH and E-DPDCH powers rela
23、tive to DPCCH power. 34g35.1.2.5B.1 E-DPCCH/DPCCH when one transport block is transmitted on E-DCH 34g35.1.2.5B.1A E-DPCCH/DPCCH when two transport blocks are transmitted on E-DCH (rank-2) 35g35.1.2.5B.2 E-DPDCH/DPCCH . 36g35.1.2.5C Setting of the uplink DPCCH gain factor when no DPDCH is configured
24、 . 40g35.1.2.5D Setting of the uplink S-DPCCH power relative to DPCCH power . 40g35.1.2.5D.1 Setting of the uplink S-DPCCH/DPCCH power ratio when less than two transport blocks are transmitted on E-DCH . 40g35.1.2.5D.2 Setting of the uplink S-DPCCH/DPCCH power ratio when two transport blocks are tra
25、nsmitted on E-DCH (rank-2) . 41g35.1.2.5E Setting of the uplink S-E-DPCCH power relative to DPCCH power . 41g35.1.2.5F Setting of the uplink S-E-DPDCH power relative to E-DPDCH power . 41g35.1.2.6 Maximum and minimum power limits 42g35.1.3 Void 45g35.2 Downlink power control . 45g35.2.1 DPCCH/DPDCH/
26、F-DPCH . 45g35.2.1.1 General 45g35.2.1.2 Ordinary transmit power control . 45g35.2.1.2.1 UE behaviour . 45g35.2.1.2.2 UTRAN behaviour 47g35.2.1.3 Power control in compressed mode 48g35.2.1.4 Power scaling of DPDCH with POSRB49g35.2.2 Void 50g35.2.3 Void 50g35.2.4 AICH 50g35.2.5 PICH . 50g35.2.6 S-CC
27、PCH 50g35.2.7 Void 50g35.2.8 Void 50g35.2.9 Void 50g35.2.10 HS-SCCH . 50g35.2.11 HS-PDSCH . 51g35.2.12 E-AGCH . 51g35.2.13 E-HICH . 51g35.2.14 E-RGCH . 51g35.2.15 MICH 51g35.2.16 S-CPICH . 51g35.2.17 F-TPICH . 51g35.2.18 D-CPICH 51g35.2.19 E-ROCH . 52g36 Random access procedure 52g36.1 Physical rand
28、om access procedure . 52g36.1.1 RACH sub-channels . 53g36.1.2 RACH access slot sets 54g36.1A Physical random access procedure for Enhanced Uplink in CELL_FACH state and IDLE mode . 54g36.2 Void 56g36A HS-DSCH-related procedures 56g36A.1 General procedure 56g36A.1.1 UE procedure for receiving HS-DSCH
29、 and HS-SCCH in the CELL_DCH state . 58g36A.1.1A UE procedure for receiving HS-DSCH and HS-SCCH in CELL_FACH state 63g36A.1.1B UE procedure for receiving HS-DSCH and HS-SCCH in the URA_PCH and CELL_PCH states 63g36A.1.2 UE procedure for reporting channel quality indication (CQI) and precoding contro
30、l indication (PCI) 64g36A.1.2.1 CQI reporting procedure in case the UE is not configured in MIMO mode and not configured in MIMO mode with four transmit antennas in any cell . 65g36A.1.2.2 Composite PCI/CQI reporting procedure in case the UE is configured in MIMO mode 67g36A.1.2.3 Composite NTBP/PCI
31、/CQI reporting procedure in case the UE is configured in MIMO mode with four transmit antennas . 69g36A.1.3 Node B procedure for transmitting the HS-DSCH and HS-SCCH . 71g3ETSI ETSI TS 125 214 V14.1.0 (2017-04)53GPP TS 25.214 version 14.1.0 Release 146A.1.3.1 Node B procedure for transmitting the HS
32、-DSCH and HS-SCCH in the CELL_DCH state 71g36A.1.3.2 Node B procedure for transmitting the HS-DSCH and HS-SCCH in the CELL_FACH state 71g36A.1.3.3 Node B procedure for transmitting the HS-DSCH and HS-SCCH in the URA_PCH or CELL_PCH state . 72g36A.2 Channel quality indicator (CQI) definition. 72g36A.
33、2.1 CQI definition when the UE is not configured in MIMO mode and not configured in MIMO mode with four transmit antennas . 73g36A.2.2 CQI definition when the UE is configured in MIMO mode . 73g36A.2.2A CQI definition when the UE is configured in MIMO mode with four transmit antennas . 74g36A.2.3 CQ
34、I tables . 76g36A.3 Operation during compressed mode on the associated DPCH or F-DPCH 87g36A.4 Precoding control indication (PCI) definition 87g36A.4.1 PCI definition when the UE is configured in MIMO mode 87g36A.4.2 PCI definition when the UE is configured in MIMO mode with four transmit antennas .
35、 88g36B E-DCH related procedures . 89g36B.1 ACK/NACK detection . 89g36B.2 Relative grants detection 90g36B.2A Absolute Grant Detection when the UE is configured with Implicit Grant Handling 90g36B.3 E-DCH control timing 90g36B.3.0 UE procedure for switching the E-DCH TTI length due to an HS-SCCH ord
36、er 91g36B.3.1 10 ms E-DCH TTI 91g36B.3.2 2 ms E-DCH TTI 91g36B.4 Operation during compressed mode . 92g36B.4.1 Uplink compressed mode 92g36B.4.2 Downlink compressed mode . 92g36C Discontinuous transmission and reception procedures . 92g36C.0 Discontinuous transmission/reception of DCH 93g36C.0.1 DL_
37、DPCH_DYN_DRX and UL_DPCH_DYN_DTX . 93g36C.0.1.1 DL_DCH_FET_Config = 0 . 93g36C.0.1.2 DL_DCH_FET_Config = 1 . 94g36C.1 Uplink CQI transmission 94g36C.2 Discontinuous uplink DPCCH/DPCCH2 transmission operation 95g36C.2.1 Uplink DPCCH burst pattern 95g36C.2.2 Uplink DPCCH preamble and postamble . 97g36
38、C.2.2.1 Uplink DPCCH preamble and postamble for the DPCCH only transmission . 97g36C.2.2.2 Uplink DPCCH preamble and postamble for the E-DCH transmission 97g36C.2.2.3 Uplink DPCCH preamble and postamble for the HS-DPCCH transmission 97g36C.3 Discontinuous downlink reception . 98g36C.3.1 Discontinuou
39、s downlink reception when the UE is in Multiflow mode . 100g36C.4 HS-SCCH orders 101g36C.5 Operation during compressed mode . 101g37 Closed loop mode 1 transmit diversity . 102g37.1 General procedure 103g37.2 Determination of feedback information . 104g37.2.1 End of frame adjustment . 104g37.2.2 Nor
40、mal initialisation . 105g37.2.3 Operation during compressed mode . 105g37.2.3.1 Downlink in compressed mode and uplink in normal mode . 105g37.2.3.2 Both downlink and uplink in compressed mode . 105g37.2.3.3 Uplink in compressed mode and downlink in normal mode . 106g37.2.4 Initialisation during com
41、pressed mode . 106g37.2.4.1 Downlink in compressed mode . 106g37.2.4.2 Uplink in compressed mode 107g37.3 Void 107g38 Idle periods for IPDL location method . 107g38.1 General . 107g38.2 Parameters of IPDL 107g38.3 Calculation of idle period position . 108g39 MIMO operation of HS-DSCH 110g3ETSI ETSI
42、TS 125 214 V14.1.0 (2017-04)63GPP TS 25.214 version 14.1.0 Release 149.1 General procedure 112g310 Uplink Closed Loop Transmit Diversity operation 112g310.1 General procedure 112g310.2 Downlink TPI transmission and control timing 114g310.3 Combining TPI bits from multiple radio links . 115g310.4 Ope
43、ration during discontinuous uplink DPCCH operation 115g310.5 Operation during compressed mode . 115g310.5.1 Uplink compressed mode 115g310.5.2 Downlink compressed mode . 115g310.6 HS-SCCH orders 115g311 Uplink MIMO 116g311.1 General procedure 118g311.2 Downlink TPI transmission and control timing 11
44、8g311.3 Combining TPI bits from radio links of the serving radio link set . 119g311.4 Operation during discontinuous uplink DPCCH operation 119g311.5 Operation during compressed mode . 119g311.6 HS-SCCH orders 119g311.7 Uplink power control 119g312 MIMO operation of HS-DSCH with four transmit antenn
45、as . 119g312.1 General procedure 121g312.2 Symbol level interleaving . 121g312.3 Retransmission Procedures . 122g312.4 Precoding weight restriction . 123g312.5 HS-SCCH Orders . 123g3Annex A (informative): (no title) . 124g3A.1 Antenna verification . 124g3A.2 Computation of feedback information for c
46、losed loop mode 1 transmit diversity . 125g3Annex B (Informative): Power control . 126g3B.1 Downlink power control timing . 126g3B.2 Example of implementation in the UE . 130g3B.3 UL power control when losing UL synchronization 130g3Annex C (Informative): Cell search procedure 131g3Annex D (Informat
47、ive): F-TPICH Transmission . 132g3Annex E (informative): Change history . 133g3History 141g3ETSI ETSI TS 125 214 V14.1.0 (2017-04)73GPP TS 25.214 version 14.1.0 Release 14Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the
48、 present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Versio
49、n x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 214 V14.1.0 (2017-04)83GPP TS 25.214 version 14.1.0 Release 141 Scope The present document specifies and establishes the characteristics of the physicals layer procedures in
