1、 ETSI TS 131 122 V13.0.0 (2016-01) Universal Mobile Telecommunications System (UMTS); LTE; Universal Subscriber Identity Module (USIM) conformance test specification (3GPP TS 31.122 version 13.0.0 Release 13) TECHNICAL SPECIFICATION ETSI ETSI TS 131 122 V13.0.0 (2016-01)13GPP TS 31.122 version 13.0.
2、0 Release 13Reference RTS/TSGC-0631122vd00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Importan
3、t notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written aut
4、horization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document shoul
5、d be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following serv
6、ices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version sh
7、all not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered f
8、or the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 131 122 V13.0.0 (2016-01)23GPP TS 31.122 version 13.
9、0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intelle
10、ctual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, includi
11、ng IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has
12、been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross ref
13、erence between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in
14、 clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 131 122 V13.0.0 (2016-01)33GPP TS 31.122 version 13.0.0 Release 13Contents Intellectual Property Rights
15、 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 14g31 Scope 15g32 Normative References 15g33 Definitions, symbols, abbreviations and coding . 16g33.1 Definitions 16g33.2 Symbols 16g33.3 Abbreviations . 16g33.4 Coding Conventions . 16g33.5 Applicability . 16g33.5.1 Applicability of the presen
16、t document 16g33.5.2 Applicability to the UICC 16g33.5.3 Applicability of the individual tests 16g33.5.4 Applicability of conformance requirements . 17g33.6 Table of optional features . 18g33.7 Applicability table 20g34 Test environment 26g34.1 Test equipment . 26g34.1.1 ME simulator 26g34.1.2 Signa
17、l generation device . 26g34.1.2.1 Vcc 26g34.1.2.2 RST . 26g34.1.2.3 CLK. 26g34.1.2.4 I/O . 26g34.1.3 Precision force-inducing contacting device 27g34.1.4 Temperature controllable environment . 27g34.1.5 Temperature measuring device . 27g34.1.6 Voltage measuring device. 27g34.1.7 Precision measuring
18、device. 27g34.1.8 Current measuring device . 27g34.1.9 Timing Measurements on contact I/O . 27g34.2 IUT default conditions 28g34.3 Default data formatting 28g34.4 Test definition and applicability . 28g34.5 Initial conditions . 28g34.6 Test procedure 30g34.7 Test requirement . 31g35 Void 31g36 Test
19、Procedure (TS 102.221) 31g36.1 Physical characteristics . 31g36.1.1 ID-1 UICC 31g36.1.1.1 Definition and applicability . 31g36.1.1.2 Conformance requirement. 32g36.1.1.3 Test purpose 32g36.1.1.4 Method of test . 32g36.1.2 Plug-in UICC 32g36.1.2.1 Definition and applicability . 32g36.1.2.2 Conformanc
20、e requirement. 32g36.1.2.3 Test purpose 32g36.1.2.4 Method of test . 32g36.1.3 Temperature range for card operation . 33g36.1.3.1 Definition and applicability . 33g36.1.3.2 Conformance requirement. 33g3ETSI ETSI TS 131 122 V13.0.0 (2016-01)43GPP TS 31.122 version 13.0.0 Release 136.1.3.3 Test purpos
21、e 33g36.1.3.4 Method of test . 33g36.1.4 Contacts 34g36.1.4.1 Definition and applicability . 34g36.1.4.2 Conformance requirement. 34g36.1.4.3 Test purpose 34g36.1.4.4 Method of test . 34g36.1.5 Mini-UICC 34g36.1.5.1 Definition and applicability . 34g36.1.5.2 Conformance requirement. 35g36.1.5.3 Test
22、 purpose 35g36.1.5.4 Method of test . 35g36.2 Electrical specifications of the UICC Terminal interface 35g36.2.1 Supply voltage Vcc (contact C1) 35g36.2.1.1 Voltage limits 35g36.2.1.1.1 Definition and applicability . 35g36.2.1.1.2 Conformance requirement . 35g36.2.1.1.3 Test purpose 36g36.2.1.1.4 Me
23、thod of test 36g36.2.1.2 Idle current limits 36g36.2.1.2.1 Definition and applicability . 36g36.2.1.2.2 Conformance requirement . 36g36.2.1.2.3 Test purpose 36g36.2.1.2.4 Method of test 36g36.2.1.3 Current limits in clk-stop-mode 37g36.2.1.3.1 Definition and applicability . 37g36.2.1.3.2 Conformance
24、 requirement . 37g36.2.1.3.3 Test purpose 37g36.2.1.3.4 Method of test 37g36.2.2 Reset RST (contact C2) 38g36.2.2.1 Static operation . 38g36.2.2.1.1 Definition and applicability . 38g36.2.2.1.2 Conformance requirement . 38g36.2.2.1.3 Test purpose 38g36.2.2.1.4 Method of test 38g36.2.3 Programming vo
25、ltage Vpp (contact C6) . 39g36.2.3.1 Static operation . 39g36.2.3.1.1 Definition and applicability . 39g36.2.3.1.2 Conformance requirement . 39g36.2.3.1.3 Test purpose 39g36.2.3.1.4 Method of test 39g36.2.4 Clock CLK (contact C3) . 40g36.2.4.1 Frequency and duty cycle 40g36.2.4.1.1 Definition and ap
26、plicability . 40g36.2.4.1.2 Conformance requirement . 40g36.2.4.1.3 Test purpose 40g36.2.4.1.4 Method of test 40g36.2.4.2 Voltage and current . 41g36.2.4.2.1 Definition and applicability . 41g36.2.4.2.2 Conformance requirement . 41g36.2.4.2.3 Test purpose 41g36.2.4.2.4 Method of test 41g36.2.5 I/O (
27、contact C7) 42g36.2.5.1 Voltage and current . 42g36.2.5.1.1 Definition and applicability . 42g36.2.5.1.2 Conformance requirement . 42g36.2.5.1.3 Test purpose 43g36.2.5.1.4 Method of test 43g36.3 Initial communication establishment procedure . 46g36.3.1 Supply voltage switching 46g36.3.1.1 Supply vol
28、tage classes. 46g36.3.1.1.1 Definition and applicability . 46g3ETSI ETSI TS 131 122 V13.0.0 (2016-01)53GPP TS 31.122 version 13.0.0 Release 136.3.1.1.2 Conformance requirement . 46g36.3.1.1.3 Test purpose 46g36.3.1.1.4 Method of test 46g36.3.1.2 Power consumption of the UICC during ATR 46g36.3.1.2.1
29、 Definition and applicability . 46g36.3.1.2.2 Conformance requirement . 46g36.3.1.2.3 Test purpose 47g36.3.1.2.4 Method of test 47g36.3.1.3 Application related electrical parameters 47g36.3.1.3.1 Definition and applicability . 47g36.3.1.3.2 Conformance requirement . 47g36.3.1.3.3 Test purpose 47g36.
30、3.1.3.4 Method of test 48g36.3.2 ATR content 48g36.3.2.1 Major capabilities 48g36.3.2.1.1 Definition and applicability . 48g36.3.2.1.2 Conformance requirement . 48g36.3.2.1.3 Test purpose 49g36.3.2.1.4 Method of test 49g36.3.2.2 Speed enhancement. 49g36.3.2.2.1 Definition and applicability . 49g36.3
31、.2.2.2 Conformance requirement . 49g36.3.2.2.3 Test purpose 49g36.3.2.2.4 Method of test 49g36.3.2.3 Global Interface bytes . 50g36.3.2.3.1 Definition and applicability . 50g36.3.2.3.2 Conformance requirement . 50g36.3.2.3.3 Test purpose 50g36.3.2.3.4 Method of test 50g36.3.3 PPS procedure . 51g36.3
32、.3.1 Definition and applicability . 51g36.3.3.2 Conformance requirement. 51g36.3.3.3 Test purpose 51g36.3.3.4 Method of test . 51g36.3.4 Reset procedures. 51g36.3.4.1 Definition and applicability . 51g36.3.4.2 Conformance requirement. 52g36.3.4.3 Test purpose 52g36.3.4.4 Method of test . 52g36.3.5 C
33、lock stop mode . 53g36.3.5.1 Definition and applicability . 53g36.3.5.2 Conformance requirement. 53g36.3.5.3 Test purpose 53g36.3.5.4 Method of test . 53g36.3.6 Bit/character duration and sampling time . 54g36.3.6.1 Definition and applicability . 54g36.3.6.2 Conformance requirement. 54g36.3.6.3 Test
34、 purpose 54g36.3.6.4 Method of test . 54g36.3.7 Error handling . 54g36.3.7.1 Definition and applicability . 54g36.3.7.2 Conformance requirement. 54g36.3.7.3 Test purpose 54g36.3.7.4 Method of test . 54g36.3.8 Compatibility 55g36.3.8.1 Definition and applicability . 55g36.3.8.2 Conformance requiremen
35、t. 55g36.3.8.3 Test purpose 55g36.3.8.4 Method of test . 55g36.4 Transmission Protocols 56g36.4.1 Physical Layer 56g36.4.1.1 Definition and applicability . 56g3ETSI ETSI TS 131 122 V13.0.0 (2016-01)63GPP TS 31.122 version 13.0.0 Release 136.4.1.2 Conformance requirement . 56g36.4.1.3 Test purpose 56
36、g36.4.1.4 Method of test . 56g36.4.2 Data Link Layer 56g36.4.2.1 Character Frame 56g36.4.2.1.1 Definition and applicability . 56g36.4.2.1.2 Conformance requirement . 57g36.4.2.1.3 Test purpose 57g36.4.2.1.4 Method of test 57g36.4.2.2 Transmission Protocol T = 0 . 60g36.4.2.2.1 Definition and applica
37、bility . 60g36.4.2.2.2 Conformance requirement . 61g36.4.2.2.3 Test purpose 61g36.4.2.2.4 Method of test 61g36.4.2.3 Transmission Protocol T = 1 . 62g36.4.2.3.1 Timing and specific options for blocks sent with T = 1 62g36.4.2.3.1.1 Information field size . 63g36.4.2.3.1.1.1 Definition and applicabil
38、ity 63g36.4.2.3.1.1.2 Conformance requirement 63g36.4.2.3.1.1.3 Test purpose . 63g36.4.2.3.1.1.4 Method of test 63g36.4.2.3.1.2 Character waiting integer . 64g36.4.2.3.1.2.1 Definition and applicability 64g36.4.2.3.1.2.2 Conformance requirement 64g36.4.2.3.1.2.3 Test purpose . 64g36.4.2.3.1.2.4 Meth
39、od of test 64g36.4.2.3.1.3 Character waiting time . 64g36.4.2.3.1.3.1 Definition and applicability 64g36.4.2.3.1.3.2 Conformance requirement 64g36.4.2.3.1.3.3 Test purpose . 64g36.4.2.3.1.3.4 Method of test 64g36.4.2.3.1.4 Block guard time 65g36.4.2.3.1.4.1 Definition and applicability 65g36.4.2.3.1
40、.4.2 Conformance requirement 65g36.4.2.3.1.4.3 Test purpose . 65g36.4.2.3.1.4.4 Method of test 65g36.4.2.3.1.5 Waiting time extension 65g36.4.2.3.1.5.1 Definition and applicability 65g36.4.2.3.1.5.2 Conformance requirement 65g36.4.2.3.1.5.3 Test purpose . 65g36.4.2.3.1.5.4 Method of test 65g36.4.2.3
41、.1.6 Error detection code. 66g36.4.2.3.1.6.1 Definition and applicability 66g36.4.2.3.1.6.2 Conformance requirement 66g36.4.2.3.1.6.3 Test purpose . 66g36.4.2.3.1.6.4 Method of test 66g36.4.2.3.2 Block frame structure 66g36.4.2.3.2.1 Prologue field . 66g36.4.2.3.2.1.1 Node address byte 66g36.4.2.3.2
42、.1.1.1 Definition and applicability 66g36.4.2.3.2.1.1.2 Conformance requirement 66g36.4.2.3.2.1.1.3 Test purpose . 66g36.4.2.3.2.1.1.4 Method of test 66g36.4.2.3.2.1.2 Protocol Control Byte . 67g36.4.2.3.2.1.2.1 Definition and applicability 67g36.4.2.3.2.1.2.2 Conformance requirement 67g36.4.2.3.2.1
43、.2.3 Test purpose . 67g36.4.2.3.2.1.2.4 Method of test 67g36.4.2.3.2.1.3 Length 67g36.4.2.3.2.1.3.1 Definition and applicability 67g36.4.2.3.2.1.3.2 Conformance requirement 67g36.4.2.3.2.1.3.3 Test purpose . 68g3ETSI ETSI TS 131 122 V13.0.0 (2016-01)73GPP TS 31.122 version 13.0.0 Release 136.4.2.3.2
44、.1.3.4 Method of test 68g36.4.2.3.2.1.4 Information field 68g36.4.2.3.2.1.4.1 Definition and applicability 68g36.4.2.3.2.1.4.2 Conformance requirement 68g36.4.2.3.2.1.4.3 Test purpose . 68g36.4.2.3.2.1.4.4 Method of test 68g36.4.2.3.2.2 Void . 69g36.4.2.3.2.3 Epilogue field . 69g36.4.2.3.2.3.1 Defin
45、ition and applicability 69g36.4.2.3.2.3.2 Conformance requirement 69g36.4.2.3.2.3.3 Test purpose . 69g36.4.2.3.2.3.4 Method of test 69g36.4.2.3.3 Error free operation . 70g36.4.2.3.3.1 Definition and applicability . 70g36.4.2.3.3.2 Conformance requirement . 70g36.4.2.3.3.3 Test purpose . 70g36.4.2.3
46、.3.4 Method of test 70g36.4.2.3.4 Error Handling for T = 1 . 71g36.4.2.3.4.1 Protocol initialisation . 71g36.4.2.3.4.1.1 Definition and applicability 71g36.4.2.3.4.1.2 Conformance requirement 71g36.4.2.3.4.1.3 Test purpose . 71g36.4.2.3.4.1.4 Method of test 71g36.4.2.3.4.2 Block dependant errors 72g
47、36.4.2.3.4.2.1 Sending invalid blocks to the UICC . 72g36.4.2.3.4.2.1.1 Definition and applicability 72g36.4.2.3.4.2.1.2 Conformance requirement 72g36.4.2.3.4.2.1.3 Test purpose . 72g36.4.2.3.4.2.1.4 Method of test 72g36.4.2.3.5 Chaining 73g36.4.2.3.5.1 Definition and applicability . 73g36.4.2.3.5.2
48、 Conformance requirement . 73g36.4.2.3.5.3 Test purpose . 73g36.4.2.3.5.4 Method of test 73g36.4.3 Transport Layer 74g36.4.3.1 Transportation of an APDU using T = 0 . 74g36.4.3.1.1 Case 1 74g36.4.3.1.1.1 Definition and applicability . 74g36.4.3.1.1.2 Conformance requirement . 74g36.4.3.1.1.3 Test pu
49、rpose . 74g36.4.3.1.1.4 Method of test 74g36.4.3.1.2 Case 2 75g36.4.3.1.2.1 Definition and applicability . 75g36.4.3.1.2.2 Conformance requirement . 75g36.4.3.1.2.3 Test purpose . 75g36.4.3.1.2.4 Method of test 75g36.4.3.1.3 Case 3 75g36.4.3.1.3.1 Definition and applicability . 75g36.4.3.1.3.2 Conformance requirement . 75g36.4.3.1.3.3 Test purpose . 76g36.4.3.1.3.4 Method of test 76g36.4.3.1.4 Case 4 76g36.4.3.1.4.1 Definition and applicability . 76g36.4.3.1.4.2 Conformance requirement . 76g36.4.3.1.4.3 Test purpose . 77g36.4.3.1.4.4 Method of test 77g36.4.3.1.5 Use of Proc
