1、 ETSI TS 1Universal Mobile TelTelecommKey Performance IndTerrestrial Radio Acce(3GPP TS 32.4TECHNICAL SPECIFICATION132 450 V13.0.0 (2016elecommunications System (LTE; munication management; Indicators (KPI) for Evolved Unccess Network (E-UTRAN): De.450 version 13.0.0 Release 1316-02) (UMTS); Univers
2、al Definitions 13) ETSI ETSI TS 132 450 V13.0.0 (2016-02)13GPP TS 32.450 version 13.0.0 Release 13Reference RTS/TSGS-0532450vd00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C
3、Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
4、 print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version ke
5、pt on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you
6、 find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and micr
7、ofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights
8、reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owne
9、d by the GSM Association. ETSI ETSI TS 132 450 V13.0.0 (2016-02)23GPP TS 32.450 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicl
10、y available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI We
11、b server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may
12、 become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These shou
13、ld be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may
14、“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 450 V13.
15、0.0 (2016-02)33GPP TS 32.450 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 KPI Overview . 6g35 KPI De
16、finitions Template 6g36 E-UTRAN KPI Definitions 8g36.1 KPI Category “Accessibility“ . 8g36.1.1 E-RAB Accessibility. 8g36.1.1.1 Definition 8g36.1.1.2 Extended definition . 8g36.2 KPI Category “Retainability“ . 9g36.2.1 E-RAB Retainability . 9g36.2.1.1 Definition 9g36.2.1.2 Extended definition . 10g36
17、.3 KPI Category “Integrity“ 11g36.3.1 E-UTRAN IP Throughput 11g36.3.1.1 Definition 11g36.3.1.2 Extended definition . 11g36.3.2 E-UTRAN IP Latency 12g36.3.2.1 Definition 12g36.3.2.2 Extended definition . 13g36.4 KPI Category “Availability“ . 14g36.4.1 E-UTRAN Cell Availability . 14g36.4.1.1 Definitio
18、n 14g36.4.1.2 Extended Definition 14g36.5 KPI Category “Mobility“ 14g36.5.1 E-UTRAN Mobility 14g36.5.1.1 Definition 14g36.5.1.2 Extended Definition 15g3Annex A (informative): Change history . 16g3History 17g3ETSI ETSI TS 132 450 V13.0.0 (2016-02)43GPP TS 32.450 version 13.0.0 Release 13Foreword This
19、 Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-relea
20、sed by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit i
21、s incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a mulit-part deliverable covering the 3rdGeneration Pa
22、rtnership Project; Technical Specification Group Services and System Aspects; Telecommunication management; as identified below: 32.451: Key Performance Indicators (KPI) for E-UTRAN; Requirements; 32.450: Key Performance Indicators (KPI) for E-UTRAN; Definitions.Key Performance Indicators (KPI). ETS
23、I ETSI TS 132 450 V13.0.0 (2016-02)53GPP TS 32.450 version 13.0.0 Release 131 Scope The present document specifies definitions of Key Performance Indicators (KPIs) for E-UTRAN. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the
24、 present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP doc
25、ument (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ITU-T Recommendation E.800: “Terms and Definitions related to Quality of Service and Network Performance including Dependability“. 2 3GPP
26、 TS 21.905: “Vocabulary for 3GPP Specifications“. 3 3GPP TS 32.404: “Telecommunication management; Performance Management (PM); Performance measurements - Definitions and template“. 4 3GPP TS 32.405: “Telecommunication management; Performance Management (PM); Performance measurements Universal Terre
27、strial Radio Access Network (UTRAN) “. 5 3GPP TS 32.406: “Telecommunication management; Performance Management (PM); Performance measurements Core Network (CN) Packet Switched (PS) domain“. 6 3GPP TS 32.407: “Telecommunication management; Performance Management (PM); Performance measurements Core Ne
28、twork (CN) Circuit Switched (CS) domain“. 7 3GPP TS 32.408: “Telecommunication management; Performance Management (PM); Performance measurements Teleservice“. 8 3GPP TS 32.409: “Telecommunication management; Performance Management (PM); Performance measurements IP Multimedia Subsystem (IMS)“. 9 3GPP
29、 TS 52.402: “Telecommunication management; Performance Management (PM); Performance measurements - GSM“. 10 3GPP TS 32.425: “Telecommunication management; Performance Management (PM); Performance measurements Evolved Universal Terrestrial Radio Access Network (E-UTRAN)“ ETSI ETSI TS 132 450 V13.0.0
30、(2016-02)63GPP TS 32.450 version 13.0.0 Release 133 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 2 and the following apply. A term defined in the present document takes precedence over the definition of the same
31、term, if any, in TR 21.905 2. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 2 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 2. eNB E-UTRAN
32、 Node B EPS Evolved Packet System E-RAB E-UTRAN Radio Access Bearer E-UTRAN Evolved UTRAN KPI Key Performance Indicator KQI Key Quality Indicator LTE Long Term Evolution QoS Quality of Service RAT Radio Access Technology TTI Transmission Time Interval UE User Equipment UMTS Universal Mobile Telecomm
33、unications System UTRAN UMTS Radio Access Network 4 KPI Overview The following KPI categories are covered by the present document: Accessibility (see the definition in 1). Retainability (see the definition in 1). Integrity (see the definition in 1). Availability Mobility 5 KPI Definitions Template a
34、) Long name (Mandatory): This field shall contain the long and descriptive name of the KPI. b) Description (Mandatory): This field shall contain the description of the KPI. Within this field it should be given if the KPI is focusing on network or user view. c) Logical formula definition (Mandatory):
35、 The logical formula should describe what the KPI formula is in logical way. The description of the formula is given in a written textual format without any measurement or counter names. E.g. a success rate KPI“s logical formula is the successful event divided by all event. d) Physical formula defin
36、ition (Optional): This field should contain the KPI formula description using the 3GPP defined counter names. ETSI ETSI TS 132 450 V13.0.0 (2016-02)73GPP TS 32.450 version 13.0.0 Release 13This field can be used only if the counters needed for the KPI formula is defined in any of the 3GPP TS for per
37、formance measurements (TS 32.404 3, TS 32.405 4, TS 32.406 5, TS 32.407 6, TS 32.408 7, TS 32.409 8, TS 52.402 9, TS 32.425 10) e) Measurement names used for the KPI (Optional): This section should list the measurement names used for the KPI. This section can be filled out only when the underlying m
38、easurements for the KPI formula can be defined, i.e. physical formula definition is available. f) KPI Object (mandatory) This section shall describe the object of the KPI. The object of the KPI is one or some of the following: UTRAN; GERAN; CS core; PS core; IMS; E-UTRAN. The field can have multiple
39、 selection, e.g. for a network level end to end KPI the selection can be UTRAN+PS core network. g) KPI category (mandatory) This section contains the classification of the KPI into one of the KPI categories listed in section 4 h) Unit of the KPI (mandatory) This section describes the unit of the KPI
40、. The unit can be one of the following: percentage; time interval (second or millisecond); Erlang; kbit/s. i) Type of the KPI (Mandatory) This section describes the type of the KPI. The KPI type can be one of the following: MEAN: This KPI is produced to reflect a mean measurement value based on a nu
41、mber of sample results. RATIO: KPI is produced to reflect the percentage of a specific case occurrence to all the cases. CUM: This KPI is produced to reflect a cumulative measurement which is always increasing. j) Remark: (Optional) This field is for any further information that is needed for the KP
42、I definition. Here it is proposed to define any additional information that would be needed for the KPI definition; e.g. the definition of a call in UTRAN. ETSI ETSI TS 132 450 V13.0.0 (2016-02)83GPP TS 32.450 version 13.0.0 Release 136 E-UTRAN KPI Definitions 6.1 KPI Category “Accessibility“ 6.1.1
43、E-RAB Accessibility 6.1.1.1 Definition a) E-RAB Accessibility. b) A KPI that shows probability for an end-user to be provided with an E-RAB at request. c) Probability success rate for E-RABs establishment. Successful attempts compared with total number of attempts for the different parts of the E-RA
44、B establishment. d)100QCI.InitAttNbrERAB.EstabQCIr.InitSuccNbERAB.EstabEstabAttS1SIG.ConnEstabSuccS1SIG.ConnCausetabAtt.RRC.ConnEsCausetabSucc.RRC.ConnEs1QCIcause=QCIcauseBEstabSRInitialEPSA100QCIAddAttNbr.ERAB.EstabQCI.AddSuccNbrERAB.Estab2QCI=QCIstabSRAddedEPSBEAe) RRC.ConnEstabAtt.Cause RRC.ConnE
45、stabSucc.Cause S1SIG.ConnEstabAtt S1SIG.ConnEstabSucc ERAB.EstabInitAttNbr.QCI ERAB.EstabInitSuccNbr.QCI ERAB.EstabAddAttNbr.QCI ERAB.EstabAddSuccNbr.QCI f) E-UTRAN g) Accessibility h) Percentage i) RATIO j) The definition of the service provided by E-UTRAN is E-RABs. 6.1.1.2 Extended definition Map
46、ping of end-user applications towards E-RABs can be different depending on operator strategy; hence the measurement shall be adjustable depending on operator E-RAB mapping strategy. ETSI ETSI TS 132 450 V13.0.0 (2016-02)93GPP TS 32.450 version 13.0.0 Release 13Table 1 Example of service mapping towa
47、rds E-RABs Operator Service E-RAB mapping A X Initial E-RABA Y Initial E-RAB B X Initial E-RABB Y Added E-RAB To provide Accessibility measurement from E-UTRAN that can be mapped to a service for the operator the following measurements are defined: A1: Initial E-RAB establishment success rate A2: Ad
48、ded E-RAB establishment success rate The establishment success rate is defined as: Services can be mapped towards either Initial or Added E-RABs depending on operator strategy. If a different QoS characteristic is required compared with the QoS characteristic provided by an existing Initial E-RAB, a
49、n Added E-RAB can be requested. QoS characteristics can be defined on an E-RAB basis; hence both Initial E-RAB establishment success rate (A1) and Added E-RAB establishment success rate (A2) shall be available per QoS group. With these two measures the operator can calculate the service accessibility depending on E-RAB mapping as follows: Service mapped on Initial E-RAB = A1*100 % Service mapped on Added E-RAB = A1*A2*100 % 6.2 KPI Category “Retainability
