1、 ETSI TS 132 511 V14.1.0 (2018-01) Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Automatic Neighbour Relation (ANR) management; Concepts and requirements (3GPP TS 32.511 version 14.1.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 132 511 V14.1.0 (2018-01)1
2、3GPP TS 32.511 version 14.1.0 Release 14Reference RTS/TSGS-0532511ve10 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture
3、de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modif
4、ied without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Us
5、ers of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please sen
6、d your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission
7、 of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered fo
8、r the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI T
9、S 132 511 V14.1.0 (2018-01)23GPP TS 32.511 version 14.1.0 Release 14Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETS
10、I members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ip
11、r.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential
12、to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any tra
13、demark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3G
14、PP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be fo
15、und under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the
16、 expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 132 511 V14.1.0 (2018-01)33GPP TS 32.511 version 14.1.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3I
17、ntroduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Concepts and background 6g35 Requirements 6g35.1 Business level requirements . 6g35.1.1 Void 7g35.1.1.1 Void. 7g35.1.1.2 Void. 7g35.1.1.3 Void. 7g35.2 Specification level requir
18、ements 7g35.2.1 Void 7g35.2.2 Void 7g35.2.3 Void 7g35.2.4 Use cases . 7g35.2.4.1 Management of fully automatic ANR function . 7g35.2.4.2 Manual start of the ANR function by operator 8g35.2.4.3 Handling of noX2 attribute . 8g35.2.4.4 Manual stop of the ANR function by operator 9g35.2.5 Requirements 1
19、0g35.2.5.1 ANR function management in E-UTRAN 10g35.2.5.2 ANR function management in UTRAN 11g3Annex A (informative): Change history . 13g3History 14g3ETSI ETSI TS 132 511 V14.1.0 (2018-01)43GPP TS 32.511 version 14.1.0 Release 14Foreword This Technical Specification has been produced by the 3rdGene
20、ration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date
21、 and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technica
22、l enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present document is part of a TS-family covering the 3rdGeneration Partnership Project Technical Specification Group Services and System As
23、pects, Telecommunication management; as identified below: 32.511: “Automatic Neighbour Relation (ANR) management; Concepts and requirements“. ETSI ETSI TS 132 511 V14.1.0 (2018-01)53GPP TS 32.511 version 14.1.0 Release 141 Scope The present document describes the concepts and requirements for the ma
24、nagement of Automatic Neighbour Relation (ANR) in UTRAN and E-UTRAN across the Itf-N. The ANR management is a key feature of Self Organizing Networks (SON) 4. The NCR concept and background information are described in clause 4. The requirements for management of NCR are defined in clause 5. 2 Refer
25、ences The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent re
26、visions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905:
27、 “Vocabulary for 3GPP Specifications“. 2 3GPP TS 32.101: “Telecommunication management; Principles and high level requirements“. 3 3GPP TS 32.102: “Telecommunication management; Architecture“. 4 3GPP TR 32.816: “Telecommunication management; Study on Management of Evolved Universal Terrestrial Radio
28、 Access Network (E-UTRAN) and Evolved Packet Core (EPC)“. 5 3GPP TS 32.501 “Telecommunication management; Self-Configuration of Network Elements; Concepts and requirements“. 6 3GPP TS 36.300 “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (
29、E-UTRAN); Overall description; Stage 2“. 7 3GPP TS 32.301 “Telecommunication management; Configuration Management (CM); Notification Integration Reference Point (IRP); Requirements“. 8 3GPP TS 25.484 “Automatic Neighbour Relation (ANR) for UTRAN; Stage 2“. 3 Definitions and abbreviations For the pur
30、poses of the present document, the terms and definitions given in TS 32.101 2, TS 32.102 3 and TS 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TS 32.101 2, TS 32.102 3 and TS 21.905 1, in that order. 3.1 De
31、finitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. ANR function: The ANR function in E-UTRAN is described in
32、TS 36.300 6, section 22.3.2a. The ANR function in UTRAN is described in TS 25.484 8. Neighbour Cell Relation: The Neighbour Cell Relation (NCR) in E-UTRAN is defined in TS 36.300 6 section 22.3.2a. The Neighbour Cell Relation in UTRAN is defined in TS 25.484 8. ETSI ETSI TS 132 511 V14.1.0 (2018-01)
33、63GPP TS 32.511 version 14.1.0 Release 14Searchlist: List of frequencies and supporting information to be used for neighbour cell measurements. The Searchlist contains entries for E-UTRAN and supported IRATs. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 2
34、1.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. ANR Automatic Neighbour Relation eNB eNodeB or evolved NodeB NCR Neighbour Cell RelationNCRT Neighbour Cell Relation Table UC Use Ca
35、se 4 Concepts and background For E-UTRAN, the ANR function in the eNB relates to the Use Cases Establishment of new eNB in network and Optimisation of the neighbourhood list in 4. - For Establishment of new eNB in network. If the operator so chooses, the OAM system adds and configures NCRs before th
36、e eNB goes into operation. - For Optimisation of the neighbourhood list, the ANR function deals with automatic NCR additions and removals. It minimizes the need for planning and configuring NCRs. If the operator so chooses, the OAM system adds and configures NCRs or removes NCRs after the eNB goes i
37、nto operation. For UTRAN, the ANR function concept and overall description is documented in TS 25.484 8. - The ANR function in RNC allows OAM system to manage the NCRT. OAM system can add and delete NCRs and also change the attributes of the NCRs. The OAM system is informed about changes in the NCRT
38、 made by ANR function. 5 Requirements 5.1 Business level requirements REQ-ANR-CON-001 NCRs shall be set up and optimized with no or minimal human intervention. REQ-ANR-CON-002 For E-UTRAN, initial status of the newly created NCR by ANR function shall be such that HO is allowed, X2 connection setup i
39、s allowed, and the NCR is allowed to be removed by ANR function in eNB. REQ-ANR-CON-003 E-UTRAN ANR supports management of NCRs from E-UTRAN to E-UTRAN, from E-UTRAN to UTRAN, from E-UTRAN to CDMA2000 and from E-UTRAN to GERAN. REQ-ANR-CON-004 For UTRAN, initial status of the newly created NCR by AN
40、R function shall be such that HO is allowed and the NCR is allowed to be removed by ANR function in RNC. REQ-ANR-CON-005 UTRAN ANR supports management of NCRs from UTRAN to UTRAN, from UTRAN to E-UTRAN and from UTRAN to GERAN. ETSI ETSI TS 132 511 V14.1.0 (2018-01)73GPP TS 32.511 version 14.1.0 Rele
41、ase 145.1.1 Void 5.1.1.1 Void 5.1.1.2 Void 5.1.1.3 Void 5.2 Specification level requirements 5.2.1 Void 5.2.2 Void 5.2.3 Void 5.2.4 Use cases 5.2.4.1 Management of fully automatic ANR function Use Case Stage Evolution / Specification Related use Goal (*) The goal is that the IRPManager may add and r
42、emove NCRs and that it may change attributes of the NCRs Actors and Roles (*) - IRPManager as user Telecom resources - ANR function - eNB or RNC Assumptions Pre conditions - The ANR function in eNB or RNC is active; - The cell may or may not have Neighbour Cell Relations configured by O - For E-UTRA
43、N, the eNB has finished Use Case Self-configuration of a new eNodeB 5; - For UTRAN, the RNC is properly installed and running. Begins when This Use Case begins when all pre conditions have been met. Step 1 (*) (M) - If the IRPManager finds out that an unsuitable Neighbour Cell Relation has been adde
44、d by ANR, the IRPManager may “Blacklist” that particular Neighbour Cell Relation. - If the IRPManager finds out that a desired Neighbour Cell Relation has not been added by ANR, the IRPManager may “Whitelist” that particular Neighbour Cell Relation. - The IRPManager may uncheck the noRemove attribut
45、e from any present Neighbour Cell Relation. Ends when (*) This Use Case ends when the eNB or RNC is taken out of service or when the ANR function is stopped. Exceptions One of the steps identified above fails and retry is unsuccessful. Post Conditions Traceability (*) REQ-ANR-CON-001 ETSI ETSI TS 13
46、2 511 V14.1.0 (2018-01)83GPP TS 32.511 version 14.1.0 Release 145.2.4.2 Manual start of the ANR function by operator Use Case Stage Evolution / Specification Related use Goal (*) The ANR function in eNB or RNC can be enabled by IRPManager. Actors and Roles (*) - IRPManager as user Telecom resources
47、- ANR function - eNB or RNC Assumptions Pre conditions - The ANR function is not active; - The eNB or RNC may have Neighbour Cell Relations. The NCRs may be configured by O - NCR status (locked, unlocked); - HO status (allowed, prohibited). NOTE: The locked NCR status indicates that the NCR shall no
48、t be removed by the ANR function. The unlocked NCR status indicates that the NCR may be removed by the ANR function. ETSI ETSI TS 132 511 V14.1.0 (2018-01)113GPP TS 32.511 version 14.1.0 Release 14The allowed HO status indicates that handovers are allowed for this NCR. The prohibited HO status indic
49、ates that handovers are prohibited for this NCR. The combination of locked NCR status and allowed HO status is a whitelisted relation. The combination of locked NCR status and prohibited HO status is a blacklisted relation REQ-ANR-FUN-18 The IRPAgent shall support a capability allowing the IRPManager to determine whether the X2 interface between two eNodeBs is established or not established. REQ-ANR-FUN-19 IRPManager shall be able to request that the source eNB be prohibited to use X2 interface for HOs
