1、 ETSI TS 136 117 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Relay conformance testing (3GPP TS 36.117 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 136 117 V14.0.0 (2017-04)13GPP TS 36.117 version 1
2、4.0.0 Release 14Reference RTS/TSGR-0436117ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88
3、 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior wr
4、itten authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present docum
5、ent should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of
6、 the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of
7、 the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks o
8、f ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Ass
9、ociation. ETSI ETSI TS 136 117 V14.0.0 (2017-04)23GPP TS 36.117 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for
10、ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:
11、/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essenti
12、al to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interprete
13、d as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “
14、will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 117 V14.0.0 (2017-04)33G
15、PP TS 36.117 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.3 Abbreviations . 9g34. General test conditions and decla
16、rations 10g34.1 Measurement uncertainties and Test Requirements . 11g34.1.1 General 11g34.1.2 Acceptable uncertainty of Test System . 11g34.1.2.1 Measurement of relay access transmitter 11g34.1.2.2 Measurement of relay access receiver . 11g34.1.2.3 Measurement of performance requirement . 11g34.2 Re
17、lay classes 11g34.3 Regional requirements 11g34.4 Selection of configurations for testing 12g34.5 Manufacturers declarations of regional and optional requirements . 12g34.6 Specified frequency range and supported channel bandwidth 12g34.7 Format and interpretation of tests . 12g35 Operating bands an
18、d Channel arrangement 13g35.1 General . 13g35.2 Operating bands 13g35.3 Channel bandwidth . 13g35.4 Channel arrangement 13g36. Transmitter characteristics . 13g36.1 General . 13g36.1.1 E-UTRA Test Models . 13g36.2 Output power 14g36.2.1 Definition and applicability 14g36.2.2 Minimum Requirement . 14
19、g36.2.3 Test purpose 15g36.2.4 Method of test . 15g36.2.5 Test Requirements 15g36.2.6 Configured transmitted Power for backhaul link 16g36.3 Output power dynamics 16g36.3.1 Access Link Test Requirements. . 16g36.3.1.1 RE Power control dynamic range 16g36.3.1.2 Total power dynamic range . 16g36.3.1.3
20、 Transmitter OFF power . 16g36.3.1.4 Transmitter transient period 16g36.3.2 Backhaul Link Test Requirements 16g36.3.2.1 Minimum Output Power . 16g36.3.2.1.1 Test purpose 16g36.3.2.1.2 Test applicability . 16g36.3.2.1.3 Minimum conformance requirements 17g36.3.2.1.4 Test description . 17g36.3.2.1.5 T
21、est Requirement. 17g36.3.2.2 Power Control Absolute power tolerance . 17g3ETSI ETSI TS 136 117 V14.0.0 (2017-04)43GPP TS 36.117 version 14.0.0 Release 146.3.2.3 Power Control Relative power tolerance . 17g36.3.2.4 Aggregate power control tolerance . 18g36.3.2.5 Power Control for UL-MIMO . 18g36.3.2.
22、6 Transmit ON/OFF Time Mask 18g36.3.2.7 Transmit OFF Power . 18g36.3.2.7.1 Minimum requirement . 18g36.3.2.7.2 Test requirement 18g36.4 Transmitted signal quality 19g36.4.1 Frequency error . 19g36.4.1.1 Definition and applicability . 19g36.4.1.2 Minimum Requirement . 19g36.4.1.3 Test purpose 19g36.4
23、.1.4 Method of test . 19g36.4.1.5 Test requirement . 19g36.4.2 EVM . 19g36.4.3 Time alignment error 19g36.4.4 DL RS power 20g36.5 Unwanted emissions . 20g36.5.1 Transmitter spurious emissions . 20g36.5.2 Adjacent Channel Leakage power Ratio (ACLR) 20g36.5.3 Operating Bands Unwanted Emissions . 20g36
24、.5.3.1 Definition and applicability . 20g36.5.3.2 Minimum Requirement . 21g36.5.3.3 Test purpose 21g36.5.3.4 Method of test . 21g36.5.3.5 Test Requirement 21g36.6 Transmitter intermodulation . 24g37. Receiver characteristics 24g37.1 General . 24g37.2 Reference sensitivity level 24g37.2.1 Backhaul li
25、nk reference sensitivity 24g37.2.1.1 Test requirement . 24g37.2.2 Access link reference sensitivity . 25g37.3 Dynamic range . 25g37.3.1 Backhaul link Maximum Input Level . 25g37.3.2 Access link Receiver Dynamic Range 25g37.4 In-channel selectivity . 25g37.5 Adjacent Channel Selectivity (ACS) 25g37.5
26、.1 Backhaul Adjacent Channel Selectivity (ACS) 25g37.5.2 Access Link Adjacent Channel Selectivity (ACS) 26g37.6 Blocking characteristics . 26g37.6.1 Backhaul Blocking Characteristics . 26g37.6.2 Access Link Blocking Characteristics 26g37.6.3 Blocking requirements for co-location . 26g37.7 Receiver s
27、purious emissions. 26g37.7.1 Backhaul Link Receiver Spurious Emissions . 26g37.7.2 Access Link Receiver Spurious Emissions . 26g37.8 Receiver intermodulation . 26g37.8.1 Backhaul Link Receiver Intermodulation . 26g37.8.2 Access Link Receiver Intermodulation . 27g38. Access Performance requirement .
28、27g38.1 General . 27g38.2 Performance requirements for PUSCH 27g38.2.1 Requirements in multipath fading propagation conditions . 27g38.2.2 Requirements for UL timing adjustment 27g38.2.3 Requirements for HARQ-ACK multiplexed on PUSCH 28g38.3 Performance requirements for PUCCH 28g38.3.1 ACK missed de
29、tection requirements for single user PUCCH format 1a 28g38.3.2 CQI missed detection requirements for PUCCH format2 . 28g38.3.3 ACK missed detection requirements for multi user PUCCH format 1a . 28g3ETSI ETSI TS 136 117 V14.0.0 (2017-04)53GPP TS 36.117 version 14.0.0 Release 148.4 Performance require
30、ments for PRACH 28g38.4.1 PRACH false alarm probability and missed detection 28g39. Backhaul Performance requirement . 29g39.1 General . 29g39.2 Demodulation of PDSCH (Cell-Specific Reference Symbols) 29g39.3 Demodulation of PDSCH (User-Specific Reference Symbols) 29g39.4 Demodulation of PDCCH/PCFIC
31、H . 29g39.5 Demodulation of PHICH 29g39.6 Demodulation of PBCH . 29g39.7 Sustained downlink data rate provided by lower layers . 29g39.8 Demodulation of R-PDCCH. 30g39.8.1 FDD 30g39.8.1.1 FDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port 7 with 1x2 antenna co
32、nfiguration 30g39.8.1.1.1 Test purpose 30g39.8.1.1.2 Test applicability . 30g39.8.1.1.3 Minimum conformance requirements 30g39.8.1.1.4 Test description . 31g39.8.1.1.4.1 Initial conditions 31g39.8.1.1.4.2 Test procedure 32g39.8.1.1.4.3 Message contents . 32g39.8.1.1.5 Test requirement 34g39.8.1.2 FD
33、D R-PDCCH performance based on UE-specific reference signals transmitted on antenna port 7 with 4x2 antenna configuration 35g39.8.1.2.1 Test purpose 35g39.8.1.2.2 Test applicability . 35g39.8.1.2.3 Minimum conformance requirements 35g39.8.1.2.4 Test description . 37g39.8.1.2.4.1 Initial conditions 3
34、7g39.8.1.2.4.2 Test procedure 37g39.8.1.2.4.3 Message contents . 38g39.8.1.2.5 Test requirement 40g39.8.2 TDD 40g39.8.2.1 TDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port 7 with 1x2 antenna configuration 40g39.8.2.1.1 Test purpose 40g39.8.2.1.2 Test applicab
35、ility . 40g39.8.2.1.3 Minimum conformance requirements 40g39.8.2.1.4 Test description . 41g39.8.2.1.4.1 Initial conditions 41g39.8.2.1.4.2 Test procedure 42g39.8.2.1.4.3 Message contents . 42g39.8.2.1.5 Test requirement 44g39.8.2.2 TDD R-PDCCH performance based on UE-specific reference signals trans
36、mitted on antenna port 7 with 4x2 antenna configuration 45g39.8.2.2.1 Test purpose 45g39.8.2.2.2 Test applicability . 45g39.8.2.2.3 Minimum conformance requirements 45g39.8.2.2.4 Test description . 46g39.8.2.2.4.1 Initial conditions 46g39.8.2.2.4.2 Test procedure 47g39.8.2.2.4.3 Message contents . 4
37、7g39.8.2.2.5 Test requirement 50g3Annex A (normative): Propagation models for relay demodulation requirements . 51g3A.1 Propagation models for backhaul link 51g3A.1.1 Delay Profiles . 51g3A.1.1.1 LOS between eNB and relay. 51g3A.1.1.2 NLOS between eNB and relay 51g3A.1.2 Doppler Frequency . 52g3A.1.
38、3 MIMO Correlation Matrices. 52g3ETSI ETSI TS 136 117 V14.0.0 (2017-04)63GPP TS 36.117 version 14.0.0 Release 14A.2 multipath propagation fading conditions for access link 53g3Annex B (normative): Reference Measurement Channel 55g3B.1 Reference measurement channels for R-PDCCH performance requiremen
39、ts 55g3B.1.1 R-PDCCH format without cross-interleaving 55g3B.1.1.1 FDD 55g3B.1.1.2 TDD 55g3B.2 OCNG patterns for R-PDCCH performance requirements 55g3B.2.1 FDD 56g3B.2.1.1 OCNG FDD pattern 1for R-PDCCH 56g3B.2.2 TDD 56g3B.2.2.1 OCNG TDD pattern 1for R-PDCCH 56g3Annex C (normative): Physical Channel
40、Set-up for conformance tests 58g3C.1 Set-up for R-PDCCH 58g3C.2 Set-up for PDSCH 58g3Annex D (informative): Change history . 60g3History 61g3ETSI ETSI TS 136 117 V14.0.0 (2017-04)73GPP TS 36.117 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Par
41、tnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an in
42、crease in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancem
43、ents, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 117 V14.0.0 (2017-04)83GPP TS 36.117 version 14.0.0 Release 141 Scope The present document specifies the Radio Frequency (RF) test methods and confor
44、mance requirements for E-UTRA Relay. These have been derived from, and are consistent with the E-UTRA Relay specifications defined in 2. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are eith
45、er specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document),
46、a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.116: “Evolved Universal Terrestrial Radio Access (E-UTRA); Relay radio transmission and reception“. 3 3G
47、PP TS 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) Conformance Testing (Release 11)“. 4 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) Radio Transmission and Reception (Release 11)“. 5 3GPP TR 36.826: “Evolved Universal Terr
48、estrial Radio Access (E-UTRA); Base Station (BS) Relay Radio Transmission and Reception“. 6 3GPP TS 36.101: “User Equipment (UE) radio transmission and reception“. 7 3GPP TS 36.521-1 “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); User Equipment (UE) conformance s
49、pecification; Part 1: Protocol conformance specification“. 8 3GPP TS 36.508 “Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE) conformance testing“. 9 3GPP TS 36.211: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical channels and modulation“. 10 3GPP TS 36.213: “Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer procedures“. 11 3GPP TS 36.331: “Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specif
