1、 ETSI TS 137 114 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); LTE; Active Antenna System (AAS) Base Station (BS) Electromagnetic Compatibility (EMC) (3GPP TS 37.114 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 137 114 V14.0.0 (2017-04)13GPP TS 37.114 versio
2、n 14.0.0 Release 14Reference RTS/TSGR-0437114ve00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803
3、/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior
4、 written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present do
5、cument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one
6、 of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content
7、 of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Mark
8、s of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM
9、Association. ETSI ETSI TS 137 114 V14.0.0 (2017-04)23GPP TS 37.114 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available f
10、or ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (htt
11、ps:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, esse
12、ntial to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpr
13、eted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“
14、, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 137 114 V14.0.0 (2017-04)
15、33GPP TS 37.114 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions 6g33.1 Symbols 6g34 Test conditions . 6g35 Performance assessment . 6g36 Performance criteria . 6g37 Applicability overvie
16、w . 7g38 Emission . 7g39 Immunity 7g3Annex A (informative): Change history . 8g3History 9g3ETSI ETSI TS 137 114 V14.0.0 (2017-04)43GPP TS 37.114 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the prese
17、nt document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z
18、 where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit
19、 is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 137 114 V14.0.0 (2017-04)53GPP TS 37.114 version 14.0.0 Release 141 Scope The present document covers the assessment of UTRA TDD, UTRA FDD, E-UTRA and Multi-Standard Radio (MSR) Active Antenna Systems Ba
20、se Stations in respect of Electromagnetic Compatibility (EMC). NOTE: Whenever the UTRA AAS BS is referred in the following section, UTRA TDD and UTRA FDD shall be considered. The present document specifies the applicable test conditions, performance assessment and performance criteria for UTRA and E
21、-UTRA Base Stations and associated ancillary equipment in the following category: - Active Antenna System Base Station for UTRA, E-UTRA and MSR meeting the requirements of 3GPP TS 37.105 2, with conformance demonstrated by compliance to 3GPP TS 37.145-1 3. The scope of the present document is AAS BS
22、 with TAB connectors for every transceiver unit at the Transceiver Array Boundary (TAB). Requirements, procedures and values of an AAS Base Station without TAB connectors are not covered by the Rel-13 version of this document and are FFS. The environment classification used in the present document r
23、efers to the residential, commercial and light industrial environment classification used in IEC 61000-6-1 7 and IEC 61000-6-3 8. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential, commercial and light industrial environments. The level
24、s, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by
25、 date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference i
26、mplicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 37.105: “Active Antenna System (AAS) Base Station (BS) transmission and reception“. 3 3GPP TS 37.145-1: “Active Antenna System (AAS)
27、Base Station (BS) conformance testing; Part 1: Conducted conformance testing “. 4 3GPP TS 37.113: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) Electromagnetic Compatibility (EMC)“. 5 3GPP TS 25.113: “Base Station (BS) and repeater ElectroMagnetic Compatibility (EMC)“. 6 3
28、GPP TS 36.113: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) and repeater ElectroMagnetic Compatibility (EMC)“. 7 IEC 61000-6-1: 2016: “Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial env
29、ironments“. 8 IEC 61000-6-3: 2006/AMD1:2010: “Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light industrial environments“. 9 3GPP TR 37.842: “Radio Frequency (RF) requirement background for Active Antenna System (AAS) Base Stat
30、ion (BS)“. ETSI ETSI TS 137 114 V14.0.0 (2017-04)63GPP TS 37.114 version 14.0.0 Release 143 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1, 3GPP TS 37.113 4 and the following apply. A term defined in the present document takes precedence ove
31、r the definition of the same term, if any, in 3GPP TR 21.905 1 or 3GPP TS 37.113 4. active antenna system base station: BS system which combines an Antenna Array with an Active Transceiver Unit Array and a Radio Distribution Network (RDN) antenna port: RF interface at the Transceiver Array Boundary
32、of the AAS BS, specifically the TAB connectors as defined in 3GPP TS 37.105 2. 3.1 Symbols For the purposes of the present document, the following symbols apply: AAS Active Antenna System EMC ElectroMagnetic Compatibility MSR Multi-Standard Radio RDN Radio Distribution Network TAB Transceiver Array
33、Boundary 4 Test conditions Where the AAS BS has multiple TAB connectors (i.e. antenna ports) which are declared to be equivalent then it is sufficient to perform EMC tests on a single representative TAB connector (i.e. antenna port). For the definition of the TAB connector equivalence declaration (D
34、6.70), refer to 3GPP TS 37.145-1 3. EMC test shall not be performed with the AAS BS antenna array radiating, all TAB connectors shall be disconnected from the RDN/antenna array and terminated in an appropriate load impedance. For the description of the general AAS BS radio architecture and relations
35、 between the RDN/antenna array and the Transceiver Array Boundary, refer to 3GPP TR 37.842 9. For UTRA AAS BS the test conditions from 3GPP TS 25.113 5 apply. For E-UTRA AAS BS the test conditions from 3GPP TS 36.113 6 apply. For MSR AAS BS the test conditions from 3GPP TS 37.113 4 apply. 5 Performa
36、nce assessment For UTRA AAS BS the performance assessment from 3GPP TS 25.113 5 applies. For E-UTRA AAS BS the performance assessment from 3GPP TS 36.113 6 applies. For MSR AAS BS the performance assessment from 3GPP TS 37.113 4 applies. 6 Performance criteria For UTRA AAS BS the performance criteri
37、a from 3GPP TS 25.113 5 apply. For E-UTRA AAS BS the performance criteria from 3GPP TS 36.113 6 apply. For MSR AAS BS the performance criteria from 3GPP TS 37.113 4 apply. ETSI ETSI TS 137 114 V14.0.0 (2017-04)73GPP TS 37.114 version 14.0.0 Release 147 Applicability overview For UTRA AAS BS the appl
38、icability overview from 3GPP TS 25.113 5 applies. For E-UTRA AAS BS the applicability overview from 3GPP TS 36.113 6 applies. For MSR AAS BS the applicability overview from 3GPP TS 37.113 4 applies. 8 Emission For UTRA AAS BS the emission requirement from 3GPP TS 25.113 5 applies. For E-UTRA AAS BS
39、the emission requirement from 3GPP TS 36.113 6 applies. For MSR AAS BS the emission requirement from 3GPP TS 37.113 4 applies. 9 Immunity For UTRA AAS BS the immunity requirement from 3GPP TS 25.113 5 applies. For E-UTRA AAS BS the immunity requirement from 3GPP TS 36.113 6 applies. For MSR AAS BS t
40、he immunity requirement from 3GPP TS 37.113 4 applies. ETSI ETSI TS 137 114 V14.0.0 (2017-04)83GPP TS 37.114 version 14.0.0 Release 14Annex A (informative): Change history Change history Date Meeting TDoc CR Rev Cat Subject/Comment New version 2016-02 RAN4#78 R4-161123 First version of TS 0.1.0 2016
41、-03 RAN#71 RP-160401 Presented to RAN for approval. Editorial cotrrections recommended by ETSI editHelp 1.0.0 2016-03 RP-71 TR approved by RAN plenary 13.0.0 2016/06 RP-72 RP-161142 0002 1 F Clarification in EMC environmental conditions references 13.1.0 2017/03 RP-75 RP-170586 0004 - F CR to TS 37.114: Clarification of the EMC specifications scope 13.2.0 2017-03 RP-75 - - - - Update to Rel-14 version (MCC) 14.0.0 ETSI ETSI TS 137 114 V14.0.0 (2017-04)93GPP TS 37.114 version 14.0.0 Release 14History Document history V14.0.0 April 2017 Publication
