1、 ETSI TS 1Digital cellular telecoRadio tran(3GPP TS 45.0TECHNICAL SPECIFICATION145 005 V13.0.0 (2016communications system (Pharansmission and reception .005 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); 13) TEM FOR ICATIONSRETSI ETSI TS 145 005 V13.0.0 (2016-01)13GPP TS 45.005 v
2、ersion 13.0.0 Release 13Reference RTS/TSGG-0145005vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803
3、/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior
4、 written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present do
5、cument should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the fo
6、llowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PD
7、F version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI
8、registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 145 005 V13.0.0 (2016-01)23GPP TS 45.005
9、 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3
10、14: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigat
11、ion, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specificati
12、on (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. T
13、he cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as
14、described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 145 005 V13.0.0 (2016-01)33GPP TS 45.005 version 13.0.0 Release 13Contents Intellectual Pro
15、perty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 10g31 Scope 11g31.1 References 12g31.2 Abbreviations . 13g31.3 Definitions 14g32 Frequency bands and channel arrangement 14g33 Reference configuration . 17g34 Transmitter characteristics . 17g34.1 Output power 18g34.1.1 Mobile Stati
16、on 18g34.1.2 Base station . 22g34.1.2.1 Additional requirements for PCS 1 900 and MXM 1900 Base stations 24g34.1.2.2 Additional requirements for GSM 850 and MXM 850 Base stations . 24g34.1.2.3 Additional requirements for GSM 700 Base stations 24g34.1.2.4 Additional requirements for ER-GSM 900 Base s
17、tations . 24g34.1.2.4.1 Uncoordinated deployment 24g34.1.2.4.2 Coordinated deployment 25g34.2 Output RF spectrum . 25g34.2.1 Spectrum due to the modulation and wide band noise 25g34.2.1.1 General requirements for all types of Base stations and MS . 25g34.2.1.2 Additional requirements for multicarrie
18、r BTS 26g34.2.1.3 Tables for spectrum requirements due to modulation and wideband noise . 26g34.2.1.4 Exceptions for spectrum due to modulation and wideband noise . 31g34.2.1.4.1 Mobile Stations and Base Transceiver Stations except multicarrier BTS . 31g34.2.1.4.2 Multicarrier BTS . 32g34.2.2 Spectr
19、um due to switching transients . 32g34.2.2.1 General requirements 32g3a) Mobile Station: 33g3b) Base transceiver station: 33g34.3 Spurious emissions . 34g34.3.1 Principle of the specification 34g34.3.2 Base Transceiver Station 36g34.3.2.1 General requirements 36g34.3.2.2 Additional requirements for
20、co-existence with GSM systems on other frequency bands . 37g34.3.2.3 Additional requirements for co-existence with 3 G 38g34.3.3 Mobile Station 39g34.3.3.1 Mobile Station GSM 400, T-GSM 810, GSM 900, ER-GSM 900 and DCS 1 800 39g34.3.3.2 Mobile Station GSM 700, GSM 850 and PCS 1 900 40g34.4 Radio fre
21、quency tolerance 41g34.5 Output level dynamic operation . 41g34.5.1 Base Transceiver Station 41g34.5.2 Mobile Station 41g34.6 Modulation accuracy 42g34.6.1 GMSK modulation 42g34.6.2 QPSK, AQPSK, 8-PSK, 16-QAM and 32-QAM modulations . 42g34.6.2.1 RMS EVM 43g34.6.2.1.1 MS requirements . 43g34.6.2.1.2
22、Requirements for BTS . 43g34.6.2.2 Origin Offset Suppression . 44g34.6.2.3 Peak EVM . 44g3ETSI ETSI TS 145 005 V13.0.0 (2016-01)43GPP TS 45.005 version 13.0.0 Release 134.6.2.4 95:th percentile 44g34.7 Intermodulation attenuation 45g34.7.1 Base transceiver station 45g34.7.2 Intra BTS intermodulation
23、 attenuation . 45g34.7.2.1 GSM 400, GSM 900, ER-GSM 900, DCS 1800 . 45g34.7.2.1.1 Requirements for BTS except multicarrier BTS 45g34.7.2.1.2 Requirements for multicarrier BTS . 45g34.7.2.2 MXM 850 and MXM 1900 . 46g34.7.2.3 GSM 700, GSM 850 and PCS 1900 46g3a) Requirements for BTS except multicarrie
24、r BTS 46g3b) Requirements for multicarrier BTS . 47g3c) Additional requirements for all BTS . 47g34.7.3 Void 47g34.7.4 Mobile PBX (GSM 900 only) . 47g35 Receiver characteristics 47g35.1 Blocking characteristics . 48g35.1.1 Definitions of applicable frequency ranges 48g35.1.2 Requirements for MS 50g3
25、5.1.3 Requirements for BTS 51g35.1.4 Signal levels of blocking signal 53g35.1.5 Micro- and pico-BTS 58g35.2 AM suppression characteristics 58g35.2.1 Requirements for MS 58g35.2.2 Requirements for BTS 59g35.3 Intermodulation characteristics 60g35.3.1 Requirements for MS 60g35.3.2 Requirements for BTS
26、 60g35.4 Spurious emissions . 61g36 Transmitter/receiver performance 61g36.1a MS conditions 61g36.1b BTS conditions . 62g36.1 Nominal Error Rates (NER) . 63g36.1.1 GMSK modulation 63g36.1.1.1 General performance requirements . 63g36.1.1.2 Requirements for MS 63g36.1.1.3 Requirements for BTS. 64g36.1
27、.2 QPSK/8-PSK modulation . 64g36.1.2.1 Requirements for MS 64g36.1.2.2 Requirements for BTS. 65g36.1.3 16-QAM/32-QAM modulation . 66g36.1.3.1 Requirements for MS 66g36.1.3.2 Requirements for BTS. 66g36.2 Reference sensitivity level 67g36.2.1 Circuit-switched channels. 67g36.2.1a Reference performanc
28、e in VAMOS mode 69g36.2.2 Packet-switched channels . 70g36.2.3 Flexible Layer One . 72g36.2.4 Repeated associated control channel performance . 72g36.2.5 Enhanced MS receiver performance . 72g36.2.6 Additional performance conditions . 73g36.3 Reference interference level . 74g36.3.1 GMSK modulated s
29、peech channels and associated control channels . 74g36.3.2 Co-channel reference interference performance . 74g36.3.2.1 MS requirements . 74g36.3.2.2 BTS requirements . 75g36.3.3 Adjacent channel reference interference performance 75g36.3.3.1 Normal symbol rate used 75g36.3.3.1.1 MS requirements . 75
30、g36.3.3.1.2 BTS requirements 76g36.3.3.2 Higher symbol rate used: . 76g3ETSI ETSI TS 145 005 V13.0.0 (2016-01)53GPP TS 45.005 version 13.0.0 Release 136.3.3.2.1 MS requirements . 76g36.3.3.2.2 BTS requirements 77g36.3.4 Reference interference performance signal levels . 77g36.3.5 Additional referenc
31、e interference performance requirements and conditions. 78g36.4 Erroneous frame indication performance . 80g36.5 Random access and paging performance at high input levels 81g36.6 Frequency hopping performance under interference conditions 82g36.7 Incremental Redundancy Performance for EGPRS and EGPR
32、S2 MS . 82g3Annex A (informative): Spectrum characteristics (spectrum due to the modulation) . 175g3Annex B (normative): Transmitted power level versus time . 183g3Annex C (normative): Propagation conditions 189g3C.1 Simple wideband propagation model . 189g3C.2 Doppler spectrum types 189g3C.3 Propag
33、ation models 190g3C.3.1 Typical case for rural area (RAx): (6 tap setting) . 190g3C.3.2 Typical case for hilly terrain (HTx): (12 tap setting) 190g3C.3.3 Typical case for urban area (TUx): (12 tap setting) 191g3C.3.4 Profile for equalization test (EQx): (6 tap setting) . 191g3C.3.5 Typical case for
34、very small cells (TIx): (2 tap setting) . 191g3Annex D (normative): Environmental conditions . 192g3D.1 General . 192g3D.2 Environmental requirements for the MSs. 192g3D.2.1 Temperature (GSM 400, GSM 900, ER-GSM 900 and DCS 1 800) . 192g3D.2.1.1 Environmental Conditions (PCS 1 900, GSM 850 and GSM 7
35、00) . 192g3D.2.2 Voltage . 192g3D.2.3 Vibration (GSM 400, GSM 900, ER-GSM 900 and DCS 1 800). 193g3D.2.3.1 Vibration (PCS 1 900, GSM 850 and GSM 700) 193g3D.3 Environmental requirements for the BSS equipment . 193g3D.3.1 Environmental requirements for the BSS equipment . 194g3Annex E (normative): Re
36、peater characteristics 195g3E.1 Introduction 195g3E.2 Spurious emissions . 195g3E.3 Intermodulation products . 196g3E.4 Out of band gain . 196g3E.5 Frequency error and modulation accuracy . 196g3E.5.1 Frequency error 196g3E.5.2 Modulation accuracy at GMSK modulation . 197g3E.5.3 Modulation accuracy
37、at 8-PSK, 16-QAM, 32-QAM, QPSK and AQPSK modulation 197g3Annex F (normative): Antenna Feeder Loss Compensator Characteristics (GSM 400, GSM 900 and DCS 1800) . 199g3F.1 Introduction 199g3F.2 Transmitting path . 199g3F.2.1 Maximum output power . 199g3F.2.2 Gain 200g3F.2.3 Burst transmission character
38、istics 200g3F.2.4 Phase error 200g3F.2.5 Frequency error 201g3F.2.6 Group delay 201g3ETSI ETSI TS 145 005 V13.0.0 (2016-01)63GPP TS 45.005 version 13.0.0 Release 13F.2.7 Spurious emissions . 201g3F.2.8 VSWR 202g3F.2.9 Stability 202g3F.3 Receiving path 202g3F.3.1 Gain 202g3F.3.2 Noise figure 202g3F.3
39、.3 Group delay 202g3F.3.4 Intermodulation performance . 202g3F.3.5 VSWR 202g3F.3.6 Stability 202g3F.4 Guidelines (informative) 202g3Annex G (normative): Calculation of Error Vector Magnitude 204g3Annex H (normative): Requirements on Location Measurement Unit . 206g3H.1 TOA LMU Requirements . 206g3H.
40、1.1 Void 206g3H.1.2 LMU characteristics . 206g3H.1.2.1 Blocking characteristics 206g3H.1.2.2 AM suppression characteristics 206g3H.1.2.3 Intermodulation characteristics . 207g3H.1.2.4 Spurious emissions . 207g3H.1.3 Time-of-Arrival Measurement Performance 207g3H.1.3.1 Sensitivity Performance 207g3H.
41、1.3.2 Interference Performance 208g3H.1.3.3 Multipath Performance . 209g3H.1.4 Radio Interface Timing Measurement Performance . 209g3H.2 E-OTD LMU Requirements . 209g3H.2.1 LMU Characteristics 209g3H.2.1.1 Blocking characteristics 210g3H.2.1.2 AM suppression characteristics 210g3H.2.1.3 Intermodulat
42、ion characteristics . 210g3H.2.2 Sensitivity and Interference Performance . 210g3H.2.2.1 Sensitivity Performance 210g3H.2.2.2 Interference Performance 211g3H.2.2.3 Multipath Performance . 211g3Annex I (normative): E-OTD Mobile Station Requirements 213g3I.1 Introduction 213g3I.2 Sensitivity and Inter
43、ference Performance 213g3I.2.1 Sensitivity Performance . 213g3I.2.2 Interference Performance . 214g3I.2.3 Multipath Performance . 214g3Annex J (informative): Guidance on the Usage of Dynamic ARFCN Mapping 215g3J.1 Introduction 215g3J.2 Dynamic allocation of GSM 400, GSM 800, GSM 900, ER-GSM 900, DCS
44、 1800 and PCS 1900 ARFCNs . 215g3J.3 Controlling changes in dynamic mapping 215g3Annex K (normative): Reference TFCs for FLO 217g3Annex L (normative): Reference Test Scenarios for DARP 219g3Annex M (normative): Minimum Performance Requirements for Assisted Global Positioning System (A-GPS) . 221g3ET
45、SI ETSI TS 145 005 V13.0.0 (2016-01)73GPP TS 45.005 version 13.0.0 Release 13M.1 General . 221g3M.1.1 Abbreviations . 221g3M.1.2 Measurement parameters 221g3M.1.2.1 MS based A-GPS measurement parameters . 221g3M.1.2.2 MS assisted A-GPS measurement parameters 221g3M.1.3 Response time 221g3M.1.4 Time
46、assistance 221g3M.1.4.1 Use of fine time assistance 222g3M.1.4.2 2D position error . 222g3M.2 A-GPS minimum performance requirements . 222g3M.2.1 Sensitivity . 222g3M.2.1.1 Coarse time assistance 222g3M.2.1.1.1 Minimum Requirements (Coarse time assistance) 223g3M.2.1.2 Fine time assistance 223g3M.2.
47、1.2.1 Minimum Requirements (Fine time assistance) 223g3M.2.2 Nominal Accuracy 223g3M.2.2.1 Minimum requirements (nominal accuracy) . 224g3M.2.3 Dynamic Range 224g3M.2.3.1 Minimum requirements (dynamic range) . 224g3M.2.4 Multi-Path scenario 224g3M.2.4.1 Minimum Requirements (multi-path scenario) . 2
48、25g3M.2.5 Moving scenario and periodic location 225g3M.2.5.1 Minimum Requirements (moving scenario and periodic location) . 226g3M.3 Test conditions . 226g3M.3.1 General . 226g3M.3.1.1 Parameter values . 226g3M.3.1.2 Time assistance . 227g3M.3.1.3 GPS Reference Time 227g3M.3.1.4 Reference and MS loc
49、ations . 227g3M.3.1.5 Satellite constellation and assistance data . 227g3M.3.1.6 Atmospheric delays. 227g3M.3.1.7 GSM Frequency and frequency error 228g3M.3.1.8 Information elements 228g3M.3.1.9 GPS signals . 228g3M.3.1.10 RESET MS POSITIONING STORED INFORMATION Message . 228g3M.4 Propagation Conditions 228g3M.4.1 Static propagation conditions . 228g3M.4.2 Multi-path Case G1 228g3M.5 Measurement sequence chart 229g3M.5.1 General . 229g3M.5.2 MS Based A-GPS Measurement Sequence Chart 229g3M.5.3 MS Assisted A-GPS Measurement Sequence Chart 230g3M.6 Assistance data required fo
