1、 ETSI TS 148 071 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Location Services (LCS); Serving Mobile Location Centre - Base Station System (SMLC-BSS) interface; Layer 3 specification (3GPP TS 48.071 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM F
2、OR MOBILE COMMUNICATIONSRETSI ETSI TS 148 071 V14.0.0 (2017-04)13GPP TS 48.071 version 14.0.0 Release 14Reference RTS/TSGR-0648071ve00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C
3、 Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/o
4、r print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version k
5、ept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.
6、aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopyi
7、ng and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017.
8、All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks register
9、ed and owned by the GSM Association. ETSI ETSI TS 148 071 V14.0.0 (2017-04)23GPP TS 48.071 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any,
10、 is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on
11、the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may
12、 be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities.
13、 These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should
14、 not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 1
15、48 071 V14.0.0 (2017-04)33GPP TS 48.071 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g34 Messages functional definitions and contents 7g34.1 General . 7g34.2 Mess
16、ages 7g34.2.1 TA Request . 8g34.2.2 TA Response. 8g34.2.3 (void) 8g34.2.4 (void) 8g34.2.5 Reject 8g34.2.6 Reset . 9g34.2.7 Abort . 9g34.2.8 TA Layer3 . 10g34.2.9 MS Position Command . 10g34.2.10 MS Position Response 10g34.2.11 U-TDOA Request . 11g34.2.12 U-TDOA Response . 11g35 Information element e
17、ncodings 12g35.1 Message Type IE 14g35.2 Timing Advance IE 14g35.3 (void) 14g35.4 Cell Identity IE . 14g35.5 (void) 15g35.6 (void) 15g35.7 (void) 15g35.8 Channel Description IE 15g35.9 (void) 15g35.10 (void) 15g35.11 (void) 15g35.12 Measurement Report IE 15g35.13 (void) 16g35.14 Cause IE . 16g35.15
18、RRLP Flag IE . 16g35.16 RRLP IE . 17g35.17 Cell Identity List IE 17g35.18 Enhanced Measurement Report IE . 18g35.19 Location Area Code IE . 18g35.20 Frequency List IE . 19g35.21 MS Power IE 19g35.22 Delta Timer IE 19g35.23 Serving Cell Identifier IE . 19g35.24 Encryption Key IE 20g35.25 Cipher Mode
19、Setting IE 20g35.26 Channel Mode IE 20g35.27 MultiRate Configuration IE 20g35.28 Polling Repetition IE 20g35.29 Packet Channel Description IE . 21g35.30 TLLI IE 21g3ETSI ETSI TS 148 071 V14.0.0 (2017-04)43GPP TS 48.071 version 14.0.0 Release 145.31 TFI IE . 21g35.32 Starting Time IE . 21g35.33 Long
20、Encryption Key IE 22g35.34 Concurrent Positioning Flag . 22g3Annex A (informative): Change History 23g3History 24g3ETSI ETSI TS 148 071 V14.0.0 (2017-04)53GPP TS 48.071 version 14.0.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). T
21、he contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number a
22、s follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates
23、, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 148 071 V14.0.0 (2017-04)63GPP TS 48.071 version 14.0.0 Release 141 Scope The present document contains the coding of information necessary for support of location service operati
24、on on the SMLC-BSS interface layer 3. Clause 2 gives the functional definitions and contents of messages for location service operations. Clause 3 gives the general format and coding for messages used for location service and the format and coding of information elements used for location service op
25、erations. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference,
26、subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP
27、 TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 43.059: “Functional stage 2 description of Location Services (LCS) in GERAN“. 3 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 4 3GPP TS 44.018: “Mobile radio interface layer 3 specification; Radio Resource Co
28、ntrol Protocol“. 4a 3GPP TS 24.008: “Mobile radio interface layer 3 specification; Core network protocols; Stage 3“. 5 3GPP TS 45.008: “Radio subsystem link control“. 6 3GPP TS 48.008: “Mobile Switching Centre - Base Station System (MSC-BSS) interface; Layer 3 specification“. 7 3GPP TS 49.031: “Loca
29、tion Services (LCS); Base Station System Application Part LCS Extension (BSSAP-LE)“. 8 3GPP TS 44.031: “Location Services (LCS); Mobile Station (MS) - Serving Mobile Location Centre (SMLC) Radio Resource LCS Protocol (RRLP)“. 3 Definitions and abbreviations For the purposes of the present document,
30、the abbreviations, terms and definitions given in 3GPP TR 21.905 and 3GPP TS 43.059 apply. ETSI ETSI TS 148 071 V14.0.0 (2017-04)73GPP TS 48.071 version 14.0.0 Release 144 Messages functional definitions and contents 4.1 General This sub-clause defines the structure of the messages of the SMLC-BSS l
31、ayer 3 protocol defined in 3GPP TS 43.059. Each definition includes: a) a brief description of the message; b) a table listing the information elements in the order of their appearance in the message. For each IE the table indicates: 1) the name of the IE (which gives an idea of the semantics of the
32、 element), which is used in this and other specifications as a reference to the IE within the message; 2) the name of the type of the IE (which indicates the coding of the value part of the IE), and a reference to a description of the value part of the IE; 3) the presence requirement indication (M,
33、C or O) for the IE, as defined in 3GPP TS 24.007; 4) the format of the IE (T, V, TV, LV, TLV) as defined in 3GPP TS 24.007; 5) the length of the IE (or permissible range of lengths), in octets, in the message. The value of the length gives the number of octets in the IE following the length and elem
34、ent identifier. Where the length is encoded using more than one octet, the high order bit is bit 8 of the first (lowest numbered octet) and the low order bit is bit 1 of the last (highest numbered octet). When a length has a range of M to N octets, the notation “M-N“ is used. The symbol “n“ represen
35、ts the maximum of a range when indefinite. c) sub-clauses specifying conditions for IEs with presence requirement C or O in the relevant message. Together with other conditions specified in 3GPP TS 43.059 this defines when the IE shall be included or not, what non-presence of such IEs means, and (fo
36、r IEs with presence requirement C) the static conditions for presence and/or non-presence of the IEs (see 3GPP TS 43.059). 4.2 Messages The following Location Services related messages are exchanged between the SMLC and the BSS: - TA Request; - TA Response; - Reject; - Reset; - Abort; - TA Layer3; -
37、 MS Position Command; - MS Position Response; - U-TDOA Request; - U-TDOA Response. On the Lb interface the messages are contained in the BSSLAP APDU IE which is encapsulated in the following messages as specified in 3GPP TS 49.031: ETSI ETSI TS 148 071 V14.0.0 (2017-04)83GPP TS 48.071 version 14.0.0
38、 Release 14- BSSMAP-LE CONNECTION ORIENTED INFORMATION message (for all messages except the TA LAYER 3 message); - BSSMAP-LE PERFORM LOCATION REQUEST message (for the TA LAYER 3 message) - BSSMAP-LE PERFORM LOCATION INFORMATION message (for the TA LAYER 3 message). 4.2.1 TA Request The TA Request is
39、 a message from the SMLC to the BSS, requesting BSS to return the timing advance (or access delay) of the MS. Table 4.2.1.1: TA Request message content Information element Type/Reference Presence Format Length Message Type Message Type IE / 5.1 M V 1 4.2.2 TA Response The TA Response is a message fr
40、om the BSS to the SMLC. It is a response to TA Request message and contains the following information elements. Table 4.2.2.1: TA Response message content Information element Type/Reference Presence Format Length Message Type Message Type IE / 5.1 M V 1 Serving Cell Identity Cell Identity IE / 5.4 M
41、 TV 3 Timing Advance Timing Advance IE / 5.2 M TV 2 Measurement Report Measurement Report IE / 5.12 O TLV 18 Enhanced Measurement Report Enhanced Measurement Report IE / 5.18 O TLV 4-n Measured Cell Identity List Cell Identity List IE / 5.17 O TLV 6-n Concurrent Method Flag Concurrent Positioning Fl
42、ag IE / 5.34 O (note 1) TV 2 NOTE 1: This IE is only included when the BSC allows a concurrent invocation of a first and second positioning procedure 4.2.3 (void) 4.2.4 (void) 4.2.5 Reject The Reject is a message from the BSS to the SMLC. It is a possible response to TA Request, MS Position Command
43、or U-TDOA Request and contains the following information elements. Table 4.2.5.1: Reject message content Information element Type/Reference Presence Format Length Message Type Message Type IE / 5.1 M V 1 Cause Cause IE / 5.14 M TV 2 The following are the expected cause values for Reject message: - c
44、ongestion; - channel Mode not supported; - positioning procedure not supported; ETSI ETSI TS 148 071 V14.0.0 (2017-04)93GPP TS 48.071 version 14.0.0 Release 14- failure for other radio related events; - incorrect serving cell identity; - BSSAP-LE Segmentation error; - Concurrent Positioning not enab
45、led. 4.2.6 Reset The Reset is a message from the BSS to the SMLC. It is sent when the Response message contents for a positioning request are invalidated (e.g. due to handover) before the positioning procedure was completed. Table 4.2.6.1: Reset message content Information element Type/Reference Pre
46、sence Format Length Message Type Message Type IE / 5.1 M V 1 Cell ID Cell Identity IE / 5.4 M TV 3 Timing Advance Timing Advance IE / 5.2 M TV 2 Channel description Channel Description IE / 5.8 M TV 4 Cause Cause IE / 5.1 M TV 2 Measurement Report Measurement Report IE / 5.12 O TLV 18 Enhanced Measu
47、rement Report Enhanced Measurement Report IE / 5.18 O TLV 4-n Measured Cell Identity List Cell Identity List IE / 5.17 O TLV 6-n LAC Location Area Code IE / 5.19 O TV 3 Frequency List Frequency List IE 5.20 C (note 1) TLV 3-n Channel Mode Channel Mode IE 5.26 C (notes 2 - failure for other radio rel
48、ated events; - supervision Timer Expired; - incorrect serving cell identity. 4.2.7 Abort The Abort is a message from the BSS to the SMLC. Upon receiving this signal, the SMLC shall abort ongoing positioning procedure. ETSI ETSI TS 148 071 V14.0.0 (2017-04)103GPP TS 48.071 version 14.0.0 Release 14Ta
49、ble 4.2.7.1: Abort message content Information element Type/Reference Presence Format Length Message Type Message Type IE / 5.1 M V 1 Cause Cause IE / 5.14 M TV 2 The following are the expected cause values for Abort message: - failure for other radio related events; - supervision Timer Expired; - inter BSS handover; - loss of signalling connection to MS. 4.2.8 TA Layer3 The TA Layer3 is an optional encapsulated message from the BSS to the SMLC that adds the following information in Complete layer 3 Information as described in 3GPP TS 48.008. Table 4.
