1、 ETSI TS 186 007-1 V3.1.1 (2017-12) Core Network and Interoperability Testing (INT); Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification; (3GPPTMRelease 12); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATIO
2、N ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)2 Reference RTS/INT-00146-1 Keywords conformance, hold, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif en
3、registre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present
4、document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive
5、within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the p
6、resent document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as autho
7、rized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trade
8、marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the G
9、SM Association. ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.
10、2 Abbreviations . 6g34 Conformance to this PICS pro forma specification 6g34.0 The right to copy 6g34.1 Guidance for completing the PICS pro forma 6g34.1.0 Introduction. 6g34.1.1 Purposes and structure 6g34.1.2 Abbreviations and conventions 7g34.1.3 Instructions for completing the PICS pro forma. 8g
11、34.2 Identification of the implementation 8g34.2.0 Introduction 8g34.2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification . 8g34.2.3 System Under Test (SUT) identification 8g34.2.4 Product supplier 9g34.2.5 Client (if different from product supplier) 9g34.2.6 PICS contac
12、t person . 10g34.3 Identification of the ETSI TS 124 610 . 10g34.3.0 Introduction 10g34.4 Global statement of conformance . 10g34.5 Roles . 11g34.6 User role . 11g34.6.0 Introduction 11g34.6.1 Major capabilities . 11g34.7 Network role . 11g34.7.0 Introduction 11g34.7.1 Major capabilities . 12g3Histo
13、ry 13g3ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)4 Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-me
14、mbers, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursua
15、nt to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present docum
16、ent. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or traden
17、ame. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Test
18、ing (INT). The present document is part 1 of a multi-part deliverable covering the Conformance Test Specification of Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suit
19、e Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.610 Release 12)“. 2 ETSI ETS 300 406 (1995): “Methods for testing and Specification (MTS); Pro
20、tocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Open systems interconn
21、ection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 5 IETF RFC 3264: “An Offer/Answer Model with the Session Description Protocol (SDP)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition n
22、umber or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication,
23、ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)6 3 Definitions and abbreviations
24、 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 610 1, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Im
25、plementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information obj
26、ect ICS, etc. Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may contain additional information. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 610 1 and the following apply:
27、 ICS Implementation Conformance Statement IUT Implementation Under Test PICS Protocol ICS SUT System Under Test 4 Conformance to this PICS pro forma specification 4.0 The right to copy Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants tha
28、t users of the present document may freely reproduce the ICS proforma in this clause so that it can be used for its intended purposes and may further publish the completed ICS. 4.1 Guidance for completing the PICS pro forma 4.1.0 Introduction If it claims to conform to the present document, the actu
29、al PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numbering/naming and ordering of the pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma complet
30、ed in accordance with the guidance for completion given in clause 4.1. 4.1.1 Purposes and structure The purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 610 1 may provide information about the implementation i
31、n a standardized manner. ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)7 The ICS pro forma is subdivided into clauses for the following categories of information: - guidance for completing the ICS pro forma; - identification of the implementation; - identification of the ; - global statement of conformance
32、; - roles; - user role: - major capabilities; - network role: - major capabilities. 4.1.2 Abbreviations and conventions The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column c
33、ontains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is the requirement or option supported by the implementation?“. Status column The following n
34、otations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a
35、n unique group of related optional items and the logic of their selection which is defined immediately following the table. Reference column The reference column makes reference to ETSI TS 124 610 1, except where explicitly stated otherwise. Support column The support column shall be filled in by th
36、e supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after e
37、valuation of a conditional status). ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)8 Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is
38、FALSE. 4.1.3 Instructions for completing the PICS pro forma The supplier of the implementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described
39、 in clause 4.1.2. However, the tables containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessary, the supplier may provide additional comments in space at the
40、bottom of the tables or separately. More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. 4.2 Identification of the implementation 4.2.0 Introduction Identification of the Implementation Under Test (IUT) and the system in which it resides (the System U
41、nder Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplied
42、in the PICS should be named as the contact person. 4.2.1 Date of the statement . 4.2.2 Implementation Under Test (IUT) identification IUT name: . . IUT version: . 4.2.3 System Under Test (SUT) identification SUT name: . . ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)9 Hardware configuration: . . . Operati
43、ng system: . 4.2.4 Product supplier Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . 4.2.5 Client (if different from product supplier) Name: . Address: . . . Telephone number: . ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)10 Facsimile number:
44、. E-mail address: . Additional information: . . 4.2.6 PICS contact person (A person to contact if there are any queries concerning the content of the PICS) Name: . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . 4.3 Identification of the ETSI TS 124 610 4.3.0
45、Introduction This PICS pro forma applies to the following standard: ETSI TS 124 610 (V12.6.0) (01-2015) 1: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Communication HOLD (HOLD) using IP Multimedia (IM) Core Network (CN) subsystem; P
46、rotocol specification (3GPP TS 24.610 version 12.6.0 Release 12)“. 4.4 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the specification. Non-supported mandatory capabilities are to be identifie
47、d in the ICS, with an explanation of why the implementation is non-conforming, on pages attached to the ICS pro forma. ETSI ETSI TS 186 007-1 V3.1.1 (2017-12)11 4.5 Roles Table 4.5.1: Roles Item Role Reference Status Support 1 User 4.5.2.1/ 1 o.12 Network 4.5.2.4/ 1 o.1o.1: It is mandatory to suppor
48、t least one of these items. Comments: 4.6 User role 4.6.0 Introduction This clause contains the PICS pro forma tables related to the user role. They need to be completed only for user implementations: Prerequisite: 4.5.1/1 - user role 4.6.1 Major capabilities Table 4.6.1: User Equipment capabilities
49、 Item Requirement or option Reference Status Support 1 Does the User Equipment supports the hold and resume of media streams in the early dialogue? 5 o 2 Does the User Equipment supports the hold and resume of media streams using the UPDATE method in the confirmed dialogue? 4.5.2.1/ 1 o o.2: It is mandatory to support at least one of these items. Comments: 4.7 Network role 4.7.0 Introduction This clause contains the PICS pro forma tables related to the network role. They need to be completed only for network implementations: Prerequ
