1、 ETSI TS 186 016-2 V2.2.1 (2009-07)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);PSTN/ISDN simulation services;Closed User Group (CUG);Part 2: Test Suite Structure and Test Purposes (TSS Essential, or potentially Essential, I
2、PRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guar
3、antee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Telecommunic
4、ations and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 2 of a multi-part deliverable covering PSTN/ISDN simulation services; Closed User Group (CUG), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part
5、 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. ETSI ETSI TS 186 016-2 V2.2.1 (2009-07)51 Scope The present document specifies the test suite structure and test purp
6、oses of the Closed User Group (CUG) service, based on stage three of the IMS closed user group (CUG) simulation services. Within the Next Generation Network (NGN) the stage 3 description is specified using the IP-Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session
7、 Description Protocol (SDP). 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part
8、thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected locat
9、ion might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the pre
10、sent document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI TS 183 054: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); P
11、STN/ISDN simulation services; Protocol specification Closed User Group (CUG)“. 2 ETSI TS 186 016-1: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services; Closed User Group (CUG); Part 1: Protocol Implementation Conformance
12、Statement (PICS)“. 3 ETSI TS 181 002: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Multimedia Telephony with PSTN/ISDN simulation services“. 4 IETF RFC 3261: “SIP: Session Initiation Protocol“. 5 ETSI ES 283 027: “Telecommunications and Internet
13、 converged Services and Protocols for Advanced Networking (TISPAN); Endorsement of the SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks“. 2.2 Informative references The following referenced documents are not essential to the use of t
14、he present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. ETSI ETSI TS 186 016-2 V2.2.1 (2009-07)63 Definitions and abbreviations 3.1 Definition
15、s For the purposes of the present document, the terms and definitions given in TS 181 002 3 and the following apply: escaped character: See RFC 3261 4. NOTE: This may contain additional information. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AS App
16、lication Server CUG Closed User Group ICB Incoming Communication Barring within a CUG IMS IP Multimedia Subsystem IP Internet Protocol NGN Next Generation Network OAE Outgoing Access, explicit request required OAI Outgoing Access, implicit outgoing access for all communications OCB Outgoing Communic
17、ation Barring within a CUG PIXIT Protocol Implementation eXtra Information for Testing PSTN Public Switched Telephone Network SDP Session Description Protocol SIP Session Initiation Protocol SS Supplementary ServicesSUT System Under Test TP Test Purposes TSS Test Suite Structure UA User Agent UE Use
18、r Equipment XML eXtensible Markup Language 4 Test Suite Structure (TSS) CUG originating_UE CUG_U01_xxx originating_AS CUG without preference CUG_N01_xxxCUG without preference + OAE CUG_N02_xxx CUG without preference + OAI CUG_N03_xxx CUG with preference CUG_N04_xxxCUG with preference + OAE CUG_N05_x
19、xx CUG with preference + OAI CUG_N06_xxx No CUG CUG_N07_xxxterminating_AS CUG with OA not allowed CUG_N08_xxx CUG with OA allowed CUG_N09_xxx No CUG CUG_N10_xxxFigure 1: Test suite structure ETSI ETSI TS 186 016-2 V2.2.1 (2009-07)74.1 Configuration The scope of the present document is to test the si
20、gnalling and procedural aspects of the stage 3 requirements as described in TS 183 054 1. The stage 3 description describes the requirements for several network entities and also the requirements regarding terminal devices. Therefore several interfaces (reference points) are addressed to satisfy the
21、 test of the different entities. Therefore to test the appropriate entities the configurations below are applicable: 4.1.1 Testing of the AS The AS entity is responsible for performing and managing services. The ISC interface is the appropriate access point for testing. Figure 2: Applicable interfac
22、e to test AS functionalities If the ISC interface is not accessible it is also possible to perform the test of the AS using any NNI (Mw, Mg, Mx) interface (see figure 3). In case only the Gm interface is accessible this interface can be used instead for testing, but the verification of all requireme
23、nts may not be possible. CSCF(and/or AS)Implementation under TestTest SystemTest SystemMw, Mg, MxMw, Mg, MxFigure 3: Applicable interfaces for tests using a (generic) NNI interface 4.1.2 Testing of the UE There are special clauses in the protocol standard describing the procedures that apply at the
24、originating and terminating user equipment. Therefore the test configuration in figure 4 has been chosen. ETSI ETSI TS 186 016-2 V2.2.1 (2009-07)8User EquipmentImplementation under TestTest SystemGmFigure 4: Applicable configuration to test UE functionalities 5 Test Purposes (TP) 5.1 Introduction Fo
25、r each test requirement a TP is defined. 5.1.1 TP naming convention TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references are added to identify the actual test suite and whether it applies to the network or the user (see table 1). Tabl
26、e 1: TP identifier naming convention scheme Identifier: _ = supplementary service: e.g. “CUG“ = type of IUT: U User equipment N Network entity= group 2 digit field representing group reference according to TSS = sequential number (001-999) 5.1.2 Test strategy As the base standard TS 183 054 1 contai
27、ns no explicit requirements for testing, the TPs were generated as a result of an analysis of the base standard and the PICS specification TS 186 016-1 2. The criteria applied include the following: Whether or not a test case can be built from the TP is not considered. ETSI ETSI TS 186 016-2 V2.2.1
28、(2009-07)95.2 Test Purposes for Closed User Group (CUG) 5.2.1 TPs at the originating UA TSS CUG/originating_UE TP CUG_U01_001 CUG reference clause 4.5.2.1 Selection expression Test purpose Explicit request of CUG service. The originating user requests explicitly the CUG service by including in the i
29、nitial INVITE an xml CUGrequestType containing the preferred CUG and an outgoing access request set to “true“. Preconditions: SIP header values: INVITE: TRUE PIXIT Comments: User equipment Test equipment barb4right INVITE requesting CUG explicitly 5.2.2 Test Purposes at the Application Server of the
30、 originating User In clauses 5.2.2.1 through to 5.2.2.6 the originating user is member of one closed user group which is not assigned as preferential. In the following test purposes the CUG index of this closed user group is referred to as “registered CUGIndex“. In clause 5.2.2.4 through to 5.2.2.6
31、the originating user is also member of a second closed user group which is assigned as preferential. In the relevant test purposes the CUG index of this second closed user group is referred to as “preferred CUGIndex“. In clause 5.2.2.7 the originating user has not subscribed to the CUG service. ETSI
32、 ETSI TS 186 016-2 V2.2.1 (2009-07)105.2.2.1 CUG without preference TSS CUG/originating_AS/CUG without preference TP CUG_N01_001 CUG reference clause 4.5.2.4 Selection expression PICS 1/1 Test purpose CUG without preference: INVITE with CUG index, successful. Ensure that the SUT on receipt of an INV
33、ITE request containing an xml element cug with cugCallOperation containing registered CUGIndex, returns an INVITE request containing an xml element cug with cugInterlockBinaryCode related to registered CUG index, networkIndicator (PIXIT) and cugCommunicationIndicator set to “11“ (CUG without outgoin
34、g access). Preconditions: Originating user has subscribed to CUG Options for registered CUG index: Intra CUG restrictions: None designated Options for public identity in use: Preferential CUG: None designated Outgoing access: not allowed SIP header values: INVITE1: registered CUG index INVITE2: PIXI
35、T related to registered CUG index 11 Comments: Test equipment (ISC) AS Test equipment (ISC) INVITE1 barb4right barb4right INVITE2 TSS CUG/originating_AS/CUG without preference TP CUG_N01_002 CUG reference clause 4.5.2.4 Selection expression PICS 1/1 Test purpose CUG without preference: INVITE with C
36、UG index, unsuccessful. Ensure that the SUT on receipt of an INVITE request containing an xml element cug with cugCallOperation containing registered CUGIndex, rejects the INVITE request by sending a 603 Decline. Preconditions: Originating user has subscribed to CUG Options for registered CUG index:
37、 Intra CUG restrictions: OCB Options for public identity in use: Preferential CUG: None designated Outgoing access: not allowed SIP header values: INVITE: registered CUG index Comments: Test equipment (ISC) AS INVITE barb4right 603 Decline barb4left ACK barb4right ETSI ETSI TS 186 016-2 V2.2.1 (2009
38、-07)11TSS CUG/originating_AS/CUG without preference TP CUG_N01_003 CUG reference clause 4.5.2.4 Selection expression PICS 1/1 Test purpose CUG without preference: INVITE with CUG index, unsuccessful. Ensure that the SUT on receipt of an INVITE request containing an xml element cug with cugCallOperat
39、ion containing unregistered CUGIndex, rejects the INVITE request by sending a 403 Forbidden. Preconditions: Originating user has subscribed to CUG Options for registered CUG index: Intra CUG restrictions: None designated Options for public identity in use: Preferential CUG: None designated Outgoing
40、access: not allowed SIP header values: INVITE: unregistered CUG Comments: Test equipment (ISC) AS INVITE barb4right 403 Forbidden barb4left ACK barb4right TSS CUG/originating_AS/CUG without preference TP CUG_N01_004 CUG reference clause 4.5.2.4 Selection expression PICS 1/1 Test purpose CUG without
41、preference: INVITE with CUG index and outgoingAccessRequest = true, successful. Ensure that the SUT on receipt of an INVITE request containing an xml element cug with cugCallOperation containing outgoingAccessRequest = true and registered CUGIndex, returns an INVITE request containing an xml element
42、 cug with cugInterlockBinaryCode related to registered CUG index, networkIndicator (PIXIT) and cugCommunicationIndicator set to “11“ (CUG without outgoing access). Preconditions: Originating user has subscribed to CUG Options for registered CUG index: Intra CUG restrictions: None designated Options
43、for public identity in use: Preferential CUG: None designated Outgoing access: not allowed SIP header values: INVITE1: TRUE registered CUG index INVITE2: registered CUG index related to registered CUG index 11 Comments: Test equipment (ISC) AS Test equipment (ISC) INVITE1 barb4right barb4right INVIT
44、E2 ETSI ETSI TS 186 016-2 V2.2.1 (2009-07)12TSS CUG/originating_AS/CUG without preference TP CUG_N01_005 CUG reference clause 4.5.2.4 Selection expression PICS 1/1 Test purpose CUG without preference: INVITE with CUG index and outgoingAccessRequest = true, unsuccessful. Ensure that the SUT on receip
45、t of an INVITE request containing an xml element cug with cugCallOperation containing outgoingAccessRequest = true and registered CUGIndex, rejects the INVITE request by sending a 603 Decline. Preconditions: Originating user has subscribed to CUG Options for registered CUG index: Intra CUG restricti
46、ons: OCB Options for public identity in use: Preferential CUG: None designated Outgoing access: not allowed SIP header values: INVITE: TRUE registered CUG index Comments: Test equipment (ISC) AS INVITE barb4right 603 Decline barb4left ACK barb4right TSS CUG/originating_AS/CUG without preference TP C
47、UG_N01_006 CUG reference clause 4.5.2.4 Selection expression PICS 1/1 Test purpose CUG without preference: INVITE with CUG index and outgoingAccessRequest = true, unsuccessful. Ensure that the SUT on receipt of an INVITE request containing an xml element cug with cugCallOperation containing outgoing
48、AccessRequest = true and unregistered CUGIndex, rejects the INVITE request by sending a 403 Forbidden. Preconditions: Originating user has subscribed to CUG Options for registered CUG index: Intra CUG restrictions: None designated Options for public identity in use: Preferential CUG: None designated
49、 Outgoing access: not allowed SIP header values: INVITE: TRUE unregistered CUG Comments: Test equipment (ISC) AS INVITE barb4right 403 Forbidden barb4left ACK barb4right ETSI ETSI TS 186 016-2 V2.2.1 (2009-07)13TSS CUG/originating_AS/CUG without preference TP CUG_N01_007 CUG reference clause 4.5.2.4 Selection expression PICS 1/1 Test purpose CUG without preference: INVITE without CUG index, unsuccessful. Ensure that the SUT on receipt of an INVITE request containing an xml element cug with cugCallOperation containing outgoingAcces
