1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 10 N-STATUS Replaced by WSS-M13P13-A L. Schmalz, FNA 2004 02 18 Revised Para 3.0 inserted; para 3.1, 3.2, 3.3, 3.10, 4 deleted 1975 10 19 Released AC2-58 E.P.F Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, L
2、LC Page 1 of 2 GREASE, HIGH TEMPERATURE, ANTI-FRICTION, ESA-M1C165-A LITHIUM HYDROXY TYPE NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is an NLGI No. 3 grade, quiet running, long life, high temperature lubricant containing lithium complex soap thickener. The lubr
3、icant operating temperatures range from - 40 oC to + 176 oC. 2. APPLICATION This specification was released originally for grease used to lubricate clutch bearings. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Materials suppliers and part producers must conform to the Companys
4、Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 COLOR Green 3.5 ODOR Not unpleasant 3.6 TEXTURE Smooth, buttery 3.7 BASE Lithium complex 3.7.1 Soap, Expressed as 12-Hydroxy Stearic Acid 12 - 17% (ASTM D 128) 3.8 MINERAL OIL REQUIREMENTS (After extraction by ASTM D 128) 3.8.1 Vis
5、cosity at 40 +/- 2 oC 108 - 151 mm2/s (ASTM D 445, 100 +/- 2 oC, Method II) 10 - 18 mm2/s 3.8.2 Flash Point, min 233 oC (ASTM D 92) ENGINEERING MATERIAL SPECIFICATIONESA-M1C165-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.9 PERFORMANCE REQUIREMENTS 3.
6、9.1 Penetration, mm/10 (ASTM D 217) Worked 60 strokes 200 - 250 Worked 10E5 strokes, change from 60 strokes + 45 max 3.9.2 Dropping Point, min 260 oC (ASTM D 566) 3.9.3 Rust Test Rating 1, 1, 1 (ASTM D 1743) 3.9.4 Water Washout, max 8% (ASTM D 1264) 3.9.5 Oil Separation, by weight, max 6% (ASTM D 1742) 3.9.6 Wheel Bearing Leakage Loss, max 3 g (FLTM BJ 113-03) 3.9.7 Oxidation Stability, Pressure Drop, max 103 kPa (ASTM D 942, 500 h) 3.9.8 Timken OK Load, min 4.5 kg (ASTM D 2509)
