1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action C5L1-PR903270-5 Changes 2009 10 14 N-STATUS Replaced by Global Strategy B. Witkowski, NA1981 09 15 Released ESB-M4G188-C2 1971 06 25 Released AB1-202 WP 3948-a Page 1 of 6 SEALER, POLYOLEFIN - HOT MELT - EXTRUDED - NO
2、N ESB-M4G188-A STAINING (NON-FLOW) NOT TO BE USED FOR NEW DESIGN SEALER, POLYOLEFIN - HOT MELT - EXTRUDED - NON ESB-M4G188-B STAINING (MEDIUM FLOW) SEALER, POLYOLEFIN - HOT MELT - EXTRUDED - NON ESB-M4G188-C STAINING (HIGH FLOW) NOT TO BE USED FOR NEW DESIGN SEALER, POLYOLEFIN - HOT MELT - EXTRUDED
3、 NON ESB-M4G188-C2 STAINING (HIGH FLOW) 1. SCOPE The materials defined by these specifications are extruded hot melt polyolefin base sealers which flow under heat to a smooth surface of uniform width. They are suitable for use in exterior exposure and are paintable with exterior enamels presenting
4、an acceptable appearance free from stains, checks and porosity. 2. APPLICATION These specifications were released originally for materials used over phosphate-coated steel to seal horizontal and vertical lap joints, such as in trunk troughs, and recessed joints such as quarter panel to rocker panel. 3. REQUIREMENTS 3.1 COLOR White or as specified in Trim however, this distortion will not affect the performance of the product in regular use. ENGINEERING MATERIAL SPECIFICATION ESB-M4G188-A ESB-M4G188-B ESB-M4G188-C ESB-M4G188-C2 WP 3948-b Page 7 of 6 FIGURE 1
