1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2012 09 26 N-STATUS No longer in FCSD catalogue A. Wedepohl, NA 2006 02 13 Revised Inserted 3.0; deleted 3.1, 3.14 and 4 1978 05 26 Metricated, Renumbered and Retyped CAH1-RD572066-46 1963 07 02 Released ASI #965 Controlled document at www.MA
2、TS Copyright 2012, Ford Global Technologies, LLC Page 1 of 2 WAX, LUBRICANT, STICK NOT FOR NEW DESIGN ESB-M9G12-A 1. SCOPE The material defined by this specification is a solid lubricant, molded in stick form, consisting of a blend of petroleum type waxes and either natural waxes or fatty esters. 2.
3、 APPLICATION This specification was released originally for material used for service applications, such as lubricating door lock striker plates. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirement
4、s For Production Materials (WSS-M99P1111-A). 3.2 COLOR Opaque, creamy yellow to amber 3.3 DROPPING POINT, min 66 C (ASTM D 566) 3.4 MINERAL OIL CONTENT, max 35% (ASTM D 128) 3.5 PENETRATION, Needle, max 200 (ASTM D 1321, 100 g total load) 3.6 ODOR Nil 3.7 TEXTURE Buttery 3.8 MOISTURE CONTENT None (A
5、STM D 128) 3.9 FILLER CONTENT, max 2% as mica (ASTM D 128) 3.10 RECOVERED SAPONIFIABLE MATTER, max 6.0% (ASTM D 128) 3.11 RECOVERED UNSAPONIFIABLE MATTER, max 98% (ASTM D 128) ENGINEERING MATERIAL SPECIFICATION ESB-M9G12-A Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.12 ASH, max 2.0% (ASTM D 128) 3.13 STABILITY Shall be stable so that it does not dry out, exude oil or crumble under normal storage period of 3 months.
