1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 02 2012 05 04 N Status No usage N. Benipal, NA 2008 01 25 Revised Inserted 3.0; Deleted 3.9 then 16 h at 23 +/- 2 C, 5 cycles There shall be no blistering or peeling of the paint film. The production material shall not have a color change
2、 greater than the original panels approved by the affected product engineering office. 3.7 QUALITY Production shipments shall be equivalent to approved purchased sample in laboratory and production tests. This includes sprayability, mottling, flow-out, film thickness, hiding, hold out, adhesion, str
3、eaking, gloss and freedom from dirt and seed. The delivered product shall be used as is without additional diluent required. 3.8 RECLAIMED PAINT When the sludged material is reclaimed, each batch must be tested and conform to the specification. The shipping container of the reclaimed paint must be l
4、abeled “Reclaimed ESE-M2J216-A“ with the identification of the plant from where the sludged material was received. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 FLAMMABILITY AND/OR TOXICITY This
5、material represents a potential fire and/or health hazard. The Manufacturing Engineering Department shall notify both the Plant Security and the Safety Units of its presence in the Plant to assure that proper fire and/or health precautions are provided. The location in which it is used or stored shall be included in the notifications.
