1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 4 2008 08 28 N-STATUS Replaced by WSA-M2P170-A1, A2, A3 G. Weber, FNA 2006 05 15 Revised Para 3.0 inserted; Para 3.5 & 4 deleted 1963 08 02 Released E7-2741 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Pa
2、ge 1 of 1 PAINT QUALITY, EXCEPTIONAL HEAT RESISTANCE ESE-M2P24-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE This specification defines the quality of paint finish required where exceptional heat, gasoline and oil resistance are necessary. 2. APPLICATION This specification was released originally for a f
3、inish for exhaust manifolds or where specified. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For P
4、roduction Materials (WSS-M99P1111-A). 3.1 FILM THICKNESS, min 0.001 in (25 m) 3.2 CLEANING All surfaces to be painted shall be free from oil, grease, rust and other foreign matter where applicable. 3.3 QUALITY The quality required is that obtainable with best commercial practice. 3.4 COLOR COAT As s
5、pecified on engineering release 5. GENERAL INFORMATION 5.1 APPLICABLE PROCESS As specified by Manufacturing Engineering 5.2 MATERIAL REFERENCES Must meet requirement of material specifications covering “ES“ numbers specified by appropriate engineering authority, such as engineering release and/or engineering advance information, or color trim charts.
