1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 17 N-STATUS No known use. No replacement named D. DiGregorio, NA 2004 02 24 Revised Para 3.0 inserted; paras 1980 09 10 Released CE3K-PR741089-E Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 2
2、LUBRICANT - SYNTHETIC OIL AND CELLULOSE FIBERS ESE-M99C98-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a blend of mono-ester and di-ester-based lubricating oil and cellulose fibers. 2. APPLICATION This specification was released originally for lubricant desi
3、gned for lubricating sintered distributor shaft bearings. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 REQUIREMENTS FOR FINISHED PRODUCT 3.1.1
4、 Cellulose Fiber Content, by Weight 14 - 17% (ASTM D 128) 3.1.1.1 The materials should contain a mixture of 80% - 90% ground wood fibers, and 10% - 20% sulfite fibers. Average fiber length to be 1.0 mm with 75% between 0.25 mm - 1.5 mm. 3.1.2 Oil Content, by Weight 83 - 86% (ASTM D 128) 3.1.3 Moistu
5、re Content, by Weight, max 1% (ASTM D 128) 3.2 REQUIREMENTS FOR OIL 3.2.1 Viscosity (ASTM D 445) 3.2.1.1 At 37.8 C 36 - 43 cSt (mm2/s) 3.2.1.2 At 98.9 C 6 - 8.5 cSt (mm2/s) 3.2.2 Viscosity Index, min 160 (ASTM D 2270) ENGINEERING MATERIAL SPECIFICATIONESE-M99C98-A Printed copies are uncontrolled Cop
6、yright 2009, Ford Global Technologies, LLC Page 2 of 2 3.2.3 Flash Point, min 232 C (ASTM D 92) 3.2.4 Pour Point, max -57 C (ASTM D 97) 3.2.5 Rust Prevention Procedure “A“ No Rust (ASTM D 665) Procedure “B“ No Rust 3.2.6 Copper Corrosion, max lb (ASTM D 130) 3.2.7 Total Acid Number, max 1.5 (ASTM D 974) 3.2.8 Evaporation Loss, max 2% (ASTM D 972 at 265 C)
