1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 10 N-STATUS Replaced by WSS-M13P12-A L. Schmalz, FNA 2004 03 16 Revised Para 3.0 inserted; Para 3.3 & 4 deleted 1971 05 21 Released CAA4-DR-968425 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of
2、2 GREASE, LITHIUM SOAP NLGI NO. 1 ESF-M1C160-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is blended from mineral oil and lithium soap. 2. APPLICATION This application was released originally for grease used where good film forming and resistance and resistance
3、 to pumping action is required, such as lubricating the speedometer cable inner cable. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 GREASE REQ
4、UIREMENTS 3.1.1 Penetration, (mm/10) 310 330 (ASTM D 217, worked 60 strokes) 3.1.2 Lithium 12 Hydroxy Stearate Soap 5.0% 9.0% (ASTM D128) 3.1.3 Moisture None (ASTMD95) 3.1.4 Dropping Point, min 160 C (ASTMD56) 3.1.5 Oxidation Stability, Pressure Drop max 6 psi (41 kPa) (ASTM D 942, 100 hrs.) 3.1.6 W
5、ater Washout, max 20% (ASTM D 1264 at 80 C) 3.1.7 Oil Separation, max 40 ml (ASTM D 1742, 96 hrs.) 3.2 MINERAL OIL REQUIREMENTS 3.2.1 Viscosity at 37.8 C, max 25.1 cSt (ASTM D45) (m2/s) ENGINEERING MATERIAL SPECIFICATIONESF-M1C160-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.2.2 Viscosity at 98.9 C, min 2.65 cSt (ASTM D45) (m2/s) 3.2.3 Viscosity Index, min 50 (ASTM D270) 3.2.4 Pour Point, max -35 C (ASTM D97) 3.2.5 Flash Point, min 166 C (ASTM D92) 3.2.6 Fire Point, min 191 C (ASTM D92)
