1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 03 26 N-STATUS No Replacement Named L. Sinclair, FNA 2002 08 22 Revised Updated and renumbered 1976 11 25 Released SM/EQ8183MP Printed copies are uncontrolled Page 1 of 2 Copyright 2009, Ford Global Tec
2、hnologies, Inc. PIGMENT CONCENTRATE SK-M99B9500-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a black pigment dissolved in polyol. 2. APPLICATION This material was orginally released for coloring of polyurethane foams used in crash pads. 3. REQUIREMENTS 3.1 S
3、TANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 VISCOSITY 2100 +/- (ASTM D 2849 at 25 C +/- 0.5 C) 100 mPa.s Rotational speed 12/min Spindle No. 2 3.3 DENSITY 1.03 +/
4、- (FLTM EU-BI 2-2) 0.05 mg/m33.4 QUALITY The material shall be a smooth homogenous mixture, free from foreign material and properties detrimental to normal production use. The material shall not settle or separate after storage to an extent as to cause difficulty in mixing for use. Test Method: Pour
5、 250 g of the material as delivered through a wire mesh, width of mesh 0.8 mm). The material shall show no over-size residue. ENGINEERING MATERIAL SPECIFICATION SK-M99B9500-A Page 2 of 2 Copyright 2009, Ford Global Technologies, Inc. 3.5 HEALTH HAZARD AND ODOR The material must not contain any ingre
6、dients (matter) which, under normal production conditions, could lead to health hazards such as skin rash or irritation (dermatitis), irritation of the mucous membranes, difficulties in breathing etc. The material shall be free from objectionable odors both as received and after storage. 3.6 POLYOL
7、REQUIREMENT The polyol used as solvent shall correspond with the specification S-M4D4906-A. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 STORAGE STABILITY (from date of receipt at FMC) Minimum 2 months when stored between 5 C and 28 C in unopened drums. 4.2 FLASH POINT 200 C (ASTM D 56) 4.3 ADMIXTURE RATIO To obtain a black color shade, a 6 % to 8 % by weight of pigment concentrate, based on polyol content, shall be added to the final mixture.
