1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 03 21 N Status No replacement named N. Benipal, NA 2006 02 17 Revised Inserted 3.0; Deleted 3.2.3, 3.3 and 4 1982 07 12 Released SM.EQ9044 TP Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of
2、2 EC ADDITIVE SK-M99J9568-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is an additive for cathodic electrocoat, supplied as a binder solution in essentially organic solvents. 2. APPLICATION The material is used to adjust cathodic electrocoat primer under produc
3、tion conditions. The material shall have no adverse effect on the quality of the electrocoat primer in a production dipping tank. The material has only to be used on suppliers request and in an amount to be specified by the supplier in each case. 3. REQUIREMENTS Material specification requirements a
4、re to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 COMPOSITION 3.1.1 Vehicle Waterborne synthetic basic resins
5、 compatible with those contained in the acidic electrocoat dipping tank. 3.1.2 Toxicity The material shall not contain toxic components in excess of that permitted by the safety regulations currently prevailing in the country or plant where the material shall be used. Do not use cadmium compounds. 3
6、2 PHYSICAL PROPERTIES 3.2.1 Non-Volatile, min 53% (FLTM BI 102-01) 3.2.2 Density (ASTM D 1475) According to initial sample report +/- 0.1. ENGINEERING MATERIAL SPECIFICATION SK-M99J9568-A Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.2.4 Flash Point The flash point shall conform to th
7、e safety regulations applicable to the plant and/or country where the material shall be used. 3.2.5 Storage Stability During a storage of 3 months at room temperature, the material as received shall not gel or liver upon standing and must be free from settling which cannot be dispersed by normal agitation.
