1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 00 2014 12 01 Released L. Sinclair, NA Controlled document at www.MATS Copyright 2014, Ford Global Technologies, Inc. Page 1 of 3 CARPET, POLYESTER, NON WOVEN, FLAT FELT, WRS-M3H105-A17 NEEDLED, 380 g/m2 (15 oz) NOMINAL FACE, LATEX BACKED
2、 1. SCOPE The materials defined by these specifications are flat needled, nonwoven carpets of good quality and uniform composition used for non molded applications. The carpet face is made with 90% minimum post industrial fiber and post consumer fibers. 2. APPLICATION This specification was released
3、 originally for glue on spare tire cover in enclosed trunk applications 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1.1 In addition to the requ
4、irements listed herein, the end-item floor carpet shall be tested to WSS-M15P32-D/latest and any additional SDS requirements. The details for each of the suppliers specific construction shall be documented in the supplement attached and uploaded in the scanned data package. 3.1.2 Vehicle Interior En
5、vironment Quality Materials/Component Performance Requirements Materials used in interior applications must meet the requirements outlined in WSS-M99P2222-D1/ latest. Test data must be provided by the Tier 1 at the appropriate program milestone. 3.1.3 Recycled Content The face material must contain
6、90% recycled content as defined by WRS- M99P42-A2 (Textile Materials, Identification of Recycled Content). 3.2 SAMPLE SELECTION All evaluations shall be conducted on test specimens taken from finished roll goods prior to any subsequent operations, such as reheating or molding. 3.3 APPEARANCE (FLTM B
7、I 109-01) The color, pattern, and finish shall match the approved Design Center master sample, or shall be as specified on the engineering drawing. ENGINEERING MATERIAL SPECIFICATION WRS-M3H105-A17 Copyright 2014, Ford Global Technologies, Inc. Page 2 of 3 3.4 COMPOSITION 3.4.1 Face Fiber 90% PIR/PC
8、R (ASTM D276) Polyester 3.4.2 Binder Fiber polyethylene (ASTM D276) 3.4.3 Backing Latex (ASTM D276) 3.5 METHOD OF DYEING Solution Dyed 3.6 CONSTRUCTION 3.6.1 Face Fiber 6 Denier (ASTM D 1244) 3.7 THICKNESS 3.7.1 Face Thickness 3.0 +/- 1.0 mm (ISO 1765) 3.7.2 Backing 0.50+/- 0.25 mm (ISO 1765) 3.8 WE
9、IGHT 3.8.1 Face Fiber 216 - 264 g/m2 (ASTM D5848) (6.4 7.9) oz 3.8.2 Backing 102-170 g/m2 (ASTM D5848) (3.0 5.0) oz 4. GENERAL INFORMATION This information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning En
10、gineering Material Specifications. 4.1 DRAWING CALL OUT The following shall be called out on the Engineering drawing to correctly designate the approved material. WRS-M3H105-A17 Supplier Name and Product Code (As it appears on the Approved Source Listing) WSS-M15P32-D 5. SUMMARY OF REVISIONS ENGINEE
11、RING MATERIAL SPECIFICATION WRS-M3H105-A17 Copyright 2014, Ford Global Technologies, Inc. Page 3 of 3 Non Woven Carpet Construction Supplement Supplier _Supplier Contact Name_ Number _ Product/ Style Name _ Material Specification _ Performance Specification _ Supplier Product Code _ Manufacturing Lo
12、cation _ Supplier Lab Number _ Supplier Lab Date _ Composition Type Supplier Face Fiber ASTM D276 _ _ Minimum Recycled Content _ % PIR _ % PCR Binder Fiber ASTM D276 _ _ Renewable Content _ Backing ASTM D276 _ _ Construction Solution or piece dyed (circle one) Denier (s) _ Face Fiber Thickness ISO 1765 _+/- _ mm Backing Thickness ISO 1765 _+/- _ mm Mass per Unit Area Weight Face Fiber ASTM D5848 _+/- _ g/m2 Binder Fiber ASTM D5848 _+/- _ g/m2 Materials Engineering Signature _Date _ Comments _ Rolled Goods _ Molded Product _
