1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 04 2013 05 08 Revised See Summary of revisions S. Ryzyi, NA 2011 04 27 Revised See Summary of revisions for details S. Ryzyi, NA 1986 07 03 Released SM/ER3665TC JPC. Lines, EAO Controlled document at www.MATS Copyright 2013, Ford Global T
2、echnologies, Inc. Page 1 of 9 STEEL, CROSS REFERENCE FOR STANDARD PARTS WSD-M1A283-B1/B8 WSD-M1A283-B11 WSD-M1A283-B30 WSD-M1A283-B33 WSD-M1A283-B36/B55 WSD-M1A283-B57 NOT TO BE USED FOR NEW DESIGN WSD-M1A283-B9/B10 NOT TO BE USED FOR NEW DESIGN SD-M1A283-B12/B29 NOT TO BE USED FOR NEW DESIGN SD-M1A
3、283-B31/B32 NOT TO BE USED FOR NEW DESIGN WSD-M1A283-B34/B35 NOT TO BE USED FOR NEW DESIGN SD-M1A283-B56 1. SCOPE The materials defined by this specification are alternative national steel specifications related to the International Organization for Standardization classification. 2. APPLICATION Thi
4、s specification was released originally to simplify material choice for fasteners which could be sourced in several countries. Complete compositional agreement may not exist between the alternates listed but these differences are slight and will not significantly affect manufacture or application. T
5、he abbreviations heading the tables indicate the following: ISO International Organization for Standardization SAE Society of Automotive Engineers International EN Euronorm ASTM American Society for Testing and Materials 3. REQUIREMENTS The general quality of manufacture of steel and the wire produc
6、t for the making of fasteners shall conform to the relevant ISO standard or the equivalent national standard for the country of sourcing. In the absence of a national standard or for referee purposes, the ISO standard applies. Specific requirements for composition, hardenability, mechanical properti
7、es and treatment condition shall conform to the relevant national standards specified in section 3 of this specification. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111
8、-A). ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technologies, Inc. Page 2 of 9 3.2. COMPARABLE STEELS Suffix Industry Standards Typical Applications CompositionaStatus B1 ISO 4954 CC 4 X EN 10016-2 C4D SAE J403 UNS G10050 Bolts, Nuts, clips, Cylinder Head Insert
9、, Brackets C: 0.06 max Mn: 0.35 max P: 0.030 max S: 0.050 max Si: 0.10 max A B2 ISO 4954 CC 8 X EN 10016-2 C9D SAE J403 UNS G10080 Bolts, Nuts, clips, Cylinder Head Insert, Brackets C: 0.10 max Mn: 0.30-0.50 P: 0.030 max S: 0.050 max Si: 0.10 max A B3 ISO 4954 CC 11 X EN 10016 C10D SAE J403 UNS G101
10、00 Bolts, Nuts, clips, Cylinder Head Insert, Brackets C: 0.08-0.13 Mn: 0.30-0.60 P: 0.030 max S: 0.050 max Si: 0.10 max A B4 ISO 4954 CC 15 X EN 10016 C15D SAE J403 UNS G10150 Bolts, Nuts, clips, Cylinder Head Insert, Brackets C: 0.13-0.18 Mn: 0.30-0.60 P: 0.030 max S: 0.050 max Si: 0.10 max A B5 IS
11、O 4954 CC 21 K EN 10016 C20D SAE J403 UNS G10200 Bolts, Nuts, clips, Brackets C: 0.18-0.23 Mn: 0.30-0.60 P: 0.030 max S: 0.050 max Si: 0.15-0.35 A B6 ISO 4954 CE 20 E4 EN 10083 C22E SAE J403 UNS G10220 Bolts, Nuts, clips, Brackets, Retainers C: 0.18-0.23 Mn: 0.70-1.00 P: 0.030 max S: 0.050 max Si: 0
12、.40 max A B7 ISO 4954 CE 28 E4 EN 10083 C30E SAE J403 UNS G10290 SAE J403 UNS G10300 Bolts, Nuts, Washers, C: 0.25-0.34 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max Si: 0.40 max A B8 ISO 4954 CE 35 E4 EN 10083 C35E SAE J403 UNS G10350 Bolts, Nuts, Rivets, Studs C: 0.32-0.39 Mn: 0.50-0.80 P: 0.035 max S:
13、0.035 max Si: 0.40 max A B9 EN 10083-1 C45E Bolts, Nuts, Washers, Rivets C: 0.40-0.47 Mn: 0.60-0.90 P: 0.035 max S: 0.050 max Si: 0.40 max N ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technologies, Inc. Page 3 of 9 Suffix Industry Standards Typical Applications
14、CompositionaStatus B10 EN 10083-1 C45E SAE J403 UNS G10420 Nuts, Rivets, Studs C: 0.40-0.47 Mn: 0.60-0.90 P: 0.035 max S: 0.050 max Si: 0.40 max N B11 ISO 4954 CE 45 E4 EN 10083 C45E SAE J403 UNS G10450 Brackets, Nuts, Washers, Bolts, Pins C: 0.43-0.50 Mn: 0.60-0.90 P: 0.035 max S: 0.050 max Si: 0.4
15、0 max A B12 DIN SEL 38Cr1 Nuts N B13 DIN SEL 48Cr1 SAE J404 UNS G50460 Nuts C: 0.44-0.49 Mn: 0.75-1.00 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Ni: 0.20-0.35 N B14 ISO 4954 37 Cr 2 E EN 10083 38Cr2 Nuts C: 0.34-0.41 Mn: 0.50-0.80 P: 0.035 max S: 0.035 max Si: 0.40 max Cr: 0.40-0.60 N B15 ISO 4954 46
16、Cr 2 E EN 10083 46Cr2 Nuts C: 0.42-0.50 Mn: 0.50-0.80 P: 0.035 max S: 0.035 max Si: 0.40 max Cr: 0.40-0.60 N B16 ISO 4954 34 Cr 4 E EN 10083 34Cr4 Bolts, Nuts C: 0.30-0.37 Mn: 0.60-0.90 P: 0.035 max S: 0.035 max Si: 0.40 max Cr: 0.90-1.20 N B17 ISO 4954 37 Cr 4 E EN 10083 37Cr4 Nuts C: 0.34-0.41 Mn:
17、 0.60-0.90 P: 0.035 max S: 0.035 max Si: 0.40 max Cr: 0.90-1.20 N B18 ISO 4954 41 Cr 4 E EN 10083 41Cr4 Nuts C: 0.38-0.45 Mn: 0.60-0.90 P: 0.035 max S: 0.035 max Si: 0.40 max Cr: 0.90-1.20 N ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technologies, Inc. Page 4 of
18、 9 Suffix Industry Standards Typical Applications CompositionaStatus B19 SAE J404 UNS G40230 Nuts C: 0.20-0.25 Mn: 0.70-0.90 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Mo: 0.20-0.30 N B20 SAE J404 UNS G40270 Screws, Retainers, Nuts C: 0.25-0.30 Mn: 0.70-0.90 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Mo:
19、0.20-0.30 N B21 ISO 4954 36 Mo 3 E EN 10263 Type 2 SAE J404 UNS G40370 Bolts, Studs, Screws, Washers, Nuts C: 0.35-0.40 Mn: 0.70-0.90 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Mo: 0.20-0.30 N B22 ISO 4954 25 CrMo 4 E EN 10083 25CrMo4 Nuts C: 0.22-0.29 Mn: 0.60-0.90 P: 0.035 max S: 0.035 max Si: 0.40 m
20、ax Mo: 0.15-0.30 Cr: 0.90-1.20 N B23 ISO 4954 34 CrMo 4 E EN 10083 34CrMo4 SAE J404 UNS G41350 Bolts, Nuts C: 0.33-0.38 Mn: 0.70-0.90 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Mo: 0.15-0.25 Cr: 0.80-1.10 N B24 ISO 4954 42 CrMo 4 E EN 10083 42CrMo4 SAE J404 UNS G41400 SAE J404 UNS G41420 Studs, Nuts C:
21、 0.38-0.43 Mn: 0.75-1.00 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Mo: 0.15-0.25 Cr: 0.80-1.10 N B25 ISO 4954 41 CrNiMo2E DIN SEL 40NiCrMo22 EN 10263 Type 7 SAE J404 UNS G86400 SAE J404 UNS G87420 Screws, Nuts C: 0.38-0.43 Mn: 0.75-1.00 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Ni: 0.40-0.70 Mo: 0.15-0.
22、25 Cr: 0.40-0.60 N B26 ISO 4954 C41 Nuts N ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technologies, Inc. Page 5 of 9 Suffix Industry Standards Typical Applications CompositionaStatus B27 ISO 4954 41 CrNiMo7E SAE J404 UNS G43400 Screws, Washers, Nuts C: 0.38-0.43
23、 Mn: 0.60-0.80 P: 0.030 max S: 0.040 max Si: 0.15-0.35 Ni: 1.65-2.00 Mo: 0.20-0.30 Cr: 0.70-0.90 N B28 ISO 4954 31 CrNiMo8E EN 10083 30CrNiMo8 Nuts C: 0.27-0.34 Mn: 0.30-0.60 P: 0.035 max S: 0.035 max Si: 0.40 max Ni: 1.80-2.20 Mo: 0.30-0.50 Cr: 1.80-2.20 N B29 ISO 4954 CE 20 B G1 EN 10263 22B2 SAE
24、J403 UNS G10211 Nuts, Bolts, Washers, Studs, Hinges C: 0.18-0.23 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max B: 0.0005-0.003 N B30 ISO 4954 CE 20 B G2 EN 10269 19MnB4 SAE J403 UNS G10221 Hinges, Screws, Weld Nuts, Bolts C: 0.18-0.23 Mn: 0.70-1.00 P: 0.030 max S: 0.050 max B: 0.0005-0.003 A B31 SAE J403
25、UNS G15221 Nuts C: 0.18-0.24 Mn: 1.10-1.40 P: 0.030 max S: 0.050 max B: 0.0005-0.003 N B32 ISO 4954 CE 28 B EN 10263 28B2 SAE J403 UNS G10291 Nuts C: 0.25-0.31 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max B: 0.0005-0.003 N B33 ISO 4954 CE 35 B EN 10269 35B2 SAE J403 UNS G10351 Plugs, Rivets, Nuts C: 0.32
26、-0.38 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max B: 0.0005-0.003 A B34 EN 10263 Type 10 EN 10087 170H36 SAE J403 UNS G10371 Rivets, Plugs, Nuts C: 0.32-0.38 Mn: 0.70-1.00 P: 0.030 max S: 0.050 max B: 0.0005-0.003 N ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technol
27、ogies, Inc. Page 6 of 9 Suffix Industry Standards Typical Applications CompositionaStatus B35 ISO 4954 35 MnB 5 E SAE J403 UNS G15361 Nuts C: 0.32-0.38 Mn: 0.70-1.00 P: 0.030 max S: 0.050 max B: 0.0005-0.003 N B36 ISO 4954 37 CrB 1 E EN 10263-4 38B2 SAE J403 UNS G10381 Bolts, Washers, Nuts C: 0.35-0
28、.42 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max Cr: 0.20-0.40 B: 0.0005-0.003 A B37 ISO 683-1 C 50 E4 EN 10083 C55E SAE J403 UNS G10500 Brackets, Clamps, Strut Bearings, Clips, Bushings, Retainers, Studs, Washers, Bolts, Nuts, Screws, Pins C: 0.48-0.65 Mn: 0.60-0.90 P: 0.035 max S: 0.05 max Cr: 0.40 max
29、 Si: 0.40 max Mo: 0.10 max Ni: 0.40 max A B38 ISO 683-1 C55 EN 10016-2 C66D SAE J403 UNS G10650 Washers, Clips, Clamps, Brackets, Retainers, Hinges, Body Trim, Screws, Bolts, Nuts, Studs C: 0.60-0.70 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max Si: 0.10-0.30 Cr: 0.15 max Mo: 0.050 max Ni: 0.20 max A B39
30、ISO 683-1 C60 EN 10016-2 C70D SAE J403 UNS G10700 Washers, Clips, Retainers, Brackets, Hinges, Screws, Studs, Nuts C: 0.65-0.75 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max Si: 0.10-0.30 Cr: 0.15 max Mo: 0.050 max Ni: 0.20 max A B40 ISO 683-9 9 S 20 EN 10087 11SMn30 SAE J403 UNS G12120 SAE J403 UNS G1213
31、0 Dowels, Plugs, Nuts, Washers, Bushings, Bolts, Pins, Spacers, Rivets C: 0.13 max Mn: 0.70-1.00 P: 0.070-0.12 S: 0.16-0.33 Si: 0.10-0.30 Cr: 0.15 max Mo: 0.050 max Ni: 0.20 max A B41 ISO 683-9 11SMnPb28 EN 10087 11SMnPb30 SAE J403 UNS G12144 Plugs, Dowels, Ball Studs, Hinges, Exahust Manifold Tube
32、Connector, Spacers, Nuts, Pins, Bolts, Rivets C: 0.15 max Mn: 0.85-1.15 P: 0.040-0.090 S: 0.26-0.35 Pb: 0.15-0.35 Si: 0.05 max A ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technologies, Inc. Page 7 of 9 Suffix Industry Standards Typical Applications Compositiona
33、Status B42 ISO 683-9 11SMnPb28 EN 10087 11SMnPb30 SAE J403 UNS G12134 Plugs, Connectors, Nuts, Bolts, Pins C: 0.13 max Mn: 0.70-1.00 P: 0.07-0.12 S: 0.24-0.33 Pb: 0.15-0.35 Si: 0.05 max A B43 ISO 683-9 10 S 20 EN 10087 10S20 SAE J1249 UNS G11080 SAE J1249 UNS G11100 Nuts, Bolts, Connectors C: 0.08-0
34、.13 Si: 0.15-0.40 Mn: 0.50-0.80 P: 0.040 max S: 0.08-0.13 A B44 ISO 683-9 10 SPb 20 EN 10087 10SPb20 Nuts, Washers, Bolts, Pins, Connectors, Rivets, Dowels C: 0.07-0.13 Mn: 0.70-1.10 P: 0.06 max S: 0.15-0.25 Si: 0.40 max Pb: 0.20-0.35 A B45 ISO 683-9 10 SMn 20 EN 10087 15SMn13 Nuts C: 0.12-0.18 Mn:
35、0.90-1.30 P: 0.06 max S: 0.08-0.18 Si: 0.40 max A B46 ISO 683-9 17 SMn 20 SAE J1249 UNS G11160 Nuts, Bolts C: 0.14-0.20 Si: 0.15-0.40 Mn: 1.20-1.60 P: 0.06 max S: 0.15-0.25 A B47 ISO 683-11 C10 EN 10016-2 C10D SAE J403 UNS G10100 Bolts, Connectors, Nuts, Rivets, Washers C: 0.08-0.13 Mn: 0.30-0.60 P:
36、 0.030 max S: 0.050 max Si: 0.10 max A B48 ISO 683-1 C 15 E4 EN 10016-2 C15D SAE J403 UNS G10150 Bolts, Brackets, Studs, Nuts, Rivets, Hinges, Washers, Connectors C: 0.13-0.18 Mn: 0.30-0.60 P: 0.030 max S: 0.050 max Si: 0.10 max A B49 ISO 683-11 C 16 E4 EN 10263-2 C17C SAE J403 UNS G10160 Bolts, Bra
37、ckets, Studs, Nuts, Rivets, Washers, Connectors C: 0.13-0.18 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max Si: 0.10 max A B50 EN 10016-2 C70D SAE J403 UNS G10700 Brackets, Clips, Clamps, Retainers, Bushings, Hinges, Nuts, Plugs C: 0.65-0.75 Mn: 0.60-0.90 P: 0.030 max S: 0.050 max Si: 0.10-0.30 Cr: 0.15 ma
38、x Ni: 0.20 max A ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technologies, Inc. Page 8 of 9 Suffix Industry Standards Typical Applications CompositionaStatus B51 EN 10016-2 C80D SAE J403 UNS G10800 Clips, Clamps, Brackets, Hinges, Retainers, Body Trim Reinforceme
39、nt, Springs, Rings, Nuts, Pins C: 0.75-0.88 Mn: 0.60-0.90 P: 0.040 max S: 0.050 max Cr: 0.15 max Si: 0.10-0.30 Ni: 0.20 max A B52 EN 10016-2 C92D SAE J403 UNS G10950 Clips, Rings, Pins, Retainers C: 0.90-1.03 Mn: 0.30-0.50 P: 0.030 max S: 0.050 max Si: 0.10 max A B53 ISO 3573 HR2 ISO 3574 CR2 EN1013
40、9 DC03 EN 10130 DC03 ASTM A1008/A 1008M CS Type A ASTM A1011/A 1011M CS Type A Plugs, Brackets, Cup Plugs, Clamps, Washers C: 0.10 max Mn: 0.60 max P: 0.030 max S: 0.035 max Cu: 0.20 max Ni: 0.20 max Cr: 0.15 max Mo: 0.06 max V, Cb, Ti: 0.008 max A B54 EN 10130 DC01 ASTM A109/A 109M Temper 4, 5 Tran
41、s Axle Shim, Clips, Door Lock Plate Reinforcement, Hinges, Brackets, Weld Nuts C: 0.15 max Mn: 0.60 max P: 0.025 max S: 0.025 max Cu: 0.20 max Ni: 0.20 max Cr: 0.15 max Mo: 0.06 max A B55 ISO 683-14 55Cr3 EN 10132 55Si7 SAE J1249 UNS G92550 Heavy series slotted spring pins C: 0.51-0.59 Mn: 0.70-0.95
42、 P: 0.035 max S: 0.040 max Cr: 0.70-1.00 Si: 1.80-2.20 A B56 ISO 683-1 55SiCr6-3 EN 10089 51 Si 7 C: 0.47-0.55 Si: 1.50-1.80 Mn: 0.50-0.80 Cr: 0.50-0.80 S: 0.45 max P: 0.45 max N B57 ISO 683-11 C 10 EN 10084 C10E SAE J403 UNS G10080 SAE J403 UNS G10100 Brackets, Spacers, Retainers, Weld Studs, Cup P
43、lugs, Bolts, Washers, Pins, Clips, Nuts C: 0.08-0.13 Mn: 0.30-0.60 P: 0.030 max S: 0.050 max Si: 0.10 max A aNominal Composition, weight percent ENGINEERING MATERIAL SPECIFICATION WSD-M1A283-B1-B57 Copyright 2013, Ford Global Technologies, Inc. Page 9 of 9 4. GENERAL INFORMATION The information give
44、n below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 5. SUMMARY OF REVISIONS 2013 05 08 Added EN 10083 C55E to B37 and adjusted C range to 0.48-0.65; S changed to 0.05 max, Si ad
45、ded, P increased to 0.035 max P changed to 0.040 max on B51 Clarification added to the 2011 04 27 revision. 2011 04 27 Removed ISO callouts in B50 and B51 and updated nominal composition. Clarification to above change: The ISO callout (high Si: 1.60-2.00 for B50 and 1.80 to 2.20 for B51) was removed
46、 as it was in conflict with the EN and the SAE (low Si: 0.10-0.30). The composition was then adjusted to reflect the low Si range. Cr was changed from 0.20-0.40 to 0.15 max for B51. Cr of 0.15 max was added to B50. Ni at 0.20 max was added to both B50 and B51. 2010 10 25 N-STATUS WSD-M1A283-B9/B10,B12-B29,B31/B32,B34/B35,B56 Updated suffixes to current industry standard callouts Added table for all suffixes Added nominal compositions to each suffix Added typical applications to each suffix
