FORD WSD-M1H617-G-2008 FABRIC GALLENA DESIGN WEFT KNITTED HFW - TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M1H617-A)《GALLENA设计的HFW纬编针织织物 与标准FORD WSS-M99P1111-A一起使用 .pdf

上传人:李朗 文档编号:749558 上传时间:2019-01-14 格式:PDF 页数:6 大小:31.13KB
下载 相关 举报
FORD WSD-M1H617-G-2008 FABRIC GALLENA DESIGN WEFT KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H617-A)《GALLENA设计的HFW纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  .pdf_第1页
第1页 / 共6页
FORD WSD-M1H617-G-2008 FABRIC GALLENA DESIGN WEFT KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H617-A)《GALLENA设计的HFW纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  .pdf_第2页
第2页 / 共6页
FORD WSD-M1H617-G-2008 FABRIC GALLENA DESIGN WEFT KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H617-A)《GALLENA设计的HFW纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  .pdf_第3页
第3页 / 共6页
FORD WSD-M1H617-G-2008 FABRIC GALLENA DESIGN WEFT KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H617-A)《GALLENA设计的HFW纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  .pdf_第4页
第4页 / 共6页
FORD WSD-M1H617-G-2008 FABRIC GALLENA DESIGN WEFT KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H617-A)《GALLENA设计的HFW纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  .pdf_第5页
第5页 / 共6页
点击查看更多>>
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 11 11 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE2003 01 28 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.18, 3.19, 3.20, 4 deleted 1994 04 08 C10391302 Released N. Komatsu Printed copie

2、s are uncontrolled Page 1 of 6 Copyright 2008, Ford Global Technologies, Inc. FABRIC, GALLENA DESIGN, WEFT KNITTED, UNLAMINATED WSD-M1H617-A FABRIC, GALLENA DESIGN, WEFT KNITTED, 3 mm WSD-M1H617-B1 FABRIC, GALLENA DESIGN, WEFT KNITTED, 6 mm WSD-M1H617-B2 FABRIC, GALLENA DESIGN, WEFT KNITTED, 3 mm WS

3、D-M1H617-C1 FABRIC, GALLENA DESIGN, WEFT KNITTED, 6 mm WSD-M1H617-C2 FABRIC, GALLENA DESIGN, WEFT KNITTED, HFW WSD-M1H617-G FABRIC, GALLENA DESIGN, WEFT KNITTED, HFW WSD-M1H617-H FABRIC, GALLENA DESIGN, WEFT KNITTED, HFW WSD-M1H617-J FABRIC, GALLENA DESIGN, WEFT KNITTED, HFW WSD-M1H617-K NOT TO BE U

4、SED FOR NEW DESIGN 1. SCOPE The material defined by these specifications is a weft knitted Jacquard 20 gauge polyester velour fabric. 2. APPLICATION WSD-M1H617-A is used for molded headrests and also adhesive coated for use on inner door panels. WSD-M1H617-B1, B2, C1, C2 are used for seat wearing su

5、rfaces. WSD-M1H617-G, H, J & K are used for inner door, quarter trim panels and/or as specified on Engineering Drawings. GALLENA DESIGN WSD-M1H617-A Unlaminated WSD-M1H617-B1 3.0 mm, flame laminated to polyether foam and knitted fabric WSD-M1H617-B2 6.0 mm, flame laminated to polyether foam and knit

6、ted fabric WSD-M1H617-C1 3.0 mm, flame laminated to polyester foam and knitted fabric (EAO use only) WSD-M1H617-C2 6.0 mm, flame laminated to polyester foam and knitted fabric (EAO use only) WSD-M1H617-G HF-weldable vinyl film, adhesive bonded, or an engineering approved alternative WSD-M1H617-H HF-

7、weldable acrylic backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative WSD-M1H617-J HF-weldable vinyl backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative WSD-M1H617-K HF-weldable PU backcoating applied by t

8、he doctor-knife spreading technique, or an engineering approved alternative ENGINEERING MATERIAL SPECIFICATION WSD-M1H617-A/B1/B2/C1/C2/G/H/J/K Page 2 of 6 Copyright 2008, Ford Global Technologies, Inc. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirem

9、ents of WSB-M8P1-H. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3887) Wales 105.5 wales/10

10、cm Courses 144 courses/10 cm 3.4.2 Fabric Weight, +/- 5 % tolerance 330 g/m2(FLTM BN 106-01) 3.4.3 Pile Height, min 1.7 mm (microscope technique) 3.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSD-M1H617-A/B1/B2/C1/C2/G/H/J/K Page 3 of 6 Copyright 2008, Ford G

11、lobal Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Ground* 240/48 dTex polyester, semi-dul dyed yarn Pile 167/30 dTex polyester, semi-dull dyed yarn and 167/30 dTex polyester shiny dyed yarn *Ground construction based on a knitted jersey. 3.7 METHOD OF DYEING Yarn dyed and spun dyed or as

12、approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 REQUIREMENTS FOR POLYETHER FOAM As specified in WSD-M2D243-A2 3.10 REQUIREMENTS FOR POLYESTER FOAM As specified in SKM-4D9502-A 3.11 REQUIREMENTS FOR THE BACKING As specified in FABIC WSD-M9H111-B or a

13、n engineering approved alternative 3.12 REQUIREMENTS FOR THE FLAME LAMINATED MATERIAL 3.12.1 Thickness, range (ASTM D 1777, circular presser foot area 645 mm2, 2,8 g Force, 43 Pa pressure) WSD-M1H617-B1 3.0 +/- 1.0 mm WSD-M1H617-B2 6.0 +/- 1.0 mmWSD-M1H617-C1 3.0 +/- 1.0 mm WSD-M1H617-C2 6.0 +/- 1.0

14、 mm3.12.2 Weight, min WSD-M1H617-B1 475 +/- 30 g/m2WSD-M1H617-B2 580 +/- 40 g/m2WSD-M1H617-C1 460 +/- 30 g/m2WSD-M1H617-C2 545 +/- 40 g/m2ENGINEERING MATERIAL SPECIFICATION WSD-M1H617-A/B1/B2/C1/C2/G/H/J/K Page 4 of 6 Copyright 2008, Ford Global Technologies, Inc. 3.12.3 Stretch and Set, %, range (S

15、AE J855) 3.12.3.1 Stretch . Wales 19 +/- 7 . Courses 35 +/- 7 . Diagonal 35 +/- 7 Set . Wales 0 - 5 . Courses 0 - 5 . Diagonal 0 - 5 3.12.3.2 Modulus, max Strain, 6 % . Wales 50 N. Courses 50 N3.13 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSD-M1H617-G) 3.13.1 Weight, min (FLTM BN 106-01) PVC film 1

16、00 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative 3.14 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSD-M1H642-H) 3.14.1 Weight, min (FLTM BN 106-01) Acrylic Backcoating 35 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative

17、 ENGINEERING MATERIAL SPECIFICATION WSD-M1H617-A/B1/B2/C1/C2/G/H/J/K Page 5 of 6 Copyright 2008, Ford Global Technologies, Inc. 3.15 REQUIREMENTS FOR THE BACKCOATED MATERIAL (ESD-M1H617-J) 3.15.1 Weight, min (FLTM BN 106-01) PVC Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2 Or an

18、engineering approved alternative 3.16 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSD-M1H617-K) 3.16.1 Weight, min (FLTM BN 106-01) PU Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative 3.17 FLAMMABILITY (ISO 3795/SAE J369) Burn rate, max 100 mm/min

19、ute Note: Not required on face fabric when used as a fully bonded composite. 3.18 REQUIREMENTS FOR THE FULLY BONDED DOOR PANELS The fully bonded finished components must satisfy the requirements of engineering component specification S-77FBB-23942-AA or equivalent if specified on the engineering dra

20、wing. In addition to these requirements fabric general performance should not be reduced by the bonding process. Ford Motor Company at its discretion may perform test on the finished components to verify this. Minimum bond strengths will be specified which may vary according to the method of bonding

21、 employed. ENGINEERING MATERIAL SPECIFICATION WSD-M1H617-A/B1/B2/C1/C2/G/H/J/K Page 6 of 6 Copyright 2008, Ford Global Technologies, Inc. 3.18.1 Peel Adhesion Strength, min (FLTM BN 151-05) Fabric press formed to adhesive coated board. As Received 20 N/50 mm width After Ageing 20 N/50 mm (4h at 100

22、/- 2 C, 20 h at 40 +/- 2 C and 98 +/- 2 % relative humidity) These bond values are provisional and may be reassessed subsequent to statistical process control. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 Purchase departments will ensure that both materials defined in these specifications and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • DIN EN ISO 12402-9-2006 Personal flotation devices - Part 9 Test methods (ISO 12402-9 2006) English version of DIN EN ISO 12402-9 2006-12《人员浮力装置 第9部分 试验方法》.pdf DIN EN ISO 12402-9-2006 Personal flotation devices - Part 9 Test methods (ISO 12402-9 2006) English version of DIN EN ISO 12402-9 2006-12《人员浮力装置 第9部分 试验方法》.pdf
  • DIN EN ISO 12404-2015 Soil quality - Guidance on the selection and application of screening methods (ISO 12404 2011) German version EN ISO 12404 2015《土壤质量 筛选法的选择和应用指南(ISO 12404-201.pdf DIN EN ISO 12404-2015 Soil quality - Guidance on the selection and application of screening methods (ISO 12404 2011) German version EN ISO 12404 2015《土壤质量 筛选法的选择和应用指南(ISO 12404-201.pdf
  • DIN EN ISO 12417-1-2016 Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1 General requirements (ISO 12417-1 2015) German versi.pdf DIN EN ISO 12417-1-2016 Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1 General requirements (ISO 12417-1 2015) German versi.pdf
  • DIN EN ISO 12460-3-2016 Wood-based panels - Determination of formaldehyde release - Part 3 Gas analysis method (ISO 12460-3 2015) German version EN ISO 12460-3 2015《木材 甲醛释放测定 第3部分 .pdf DIN EN ISO 12460-3-2016 Wood-based panels - Determination of formaldehyde release - Part 3 Gas analysis method (ISO 12460-3 2015) German version EN ISO 12460-3 2015《木材 甲醛释放测定 第3部分 .pdf
  • DIN EN ISO 12460-4-2016 Wood-based panels - Determination of formaldehyde release - Part 4 Desiccator method (ISO 12460-4 2016) German version EN ISO 12460-4 2016《木基板材 甲醛释放的测定 第4部分.pdf DIN EN ISO 12460-4-2016 Wood-based panels - Determination of formaldehyde release - Part 4 Desiccator method (ISO 12460-4 2016) German version EN ISO 12460-4 2016《木基板材 甲醛释放的测定 第4部分.pdf
  • DIN EN ISO 12460-5-2016 Wood-based panels - Determination of formaldehyde release - Part 5 Extraction method (called the perforator method) (ISO 12460-5 2015) German version EN ISO.pdf DIN EN ISO 12460-5-2016 Wood-based panels - Determination of formaldehyde release - Part 5 Extraction method (called the perforator method) (ISO 12460-5 2015) German version EN ISO.pdf
  • DIN EN ISO 12474-2011 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474 2010) German version EN ISO 12474 2010《带米制细牙螺纹的圆柱头内六角头螺钉(ISO 12474-2010) 德文版本EN ISO 12.pdf DIN EN ISO 12474-2011 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474 2010) German version EN ISO 12474 2010《带米制细牙螺纹的圆柱头内六角头螺钉(ISO 12474-2010) 德文版本EN ISO 12.pdf
  • DIN EN ISO 1248-2008 Iron oxide pigments - Specifications and methods of test (ISO 1248 2006 including Technical Corrigendum 1 2007) German version EN ISO 1248 2008《氧化铁颜料 规范和试验方法》.pdf DIN EN ISO 1248-2008 Iron oxide pigments - Specifications and methods of test (ISO 1248 2006 including Technical Corrigendum 1 2007) German version EN ISO 1248 2008《氧化铁颜料 规范和试验方法》.pdf
  • DIN EN ISO 12499-2010 Industrial fans - Mechanical safety of fans - Guarding (ISO 12499 1999) German version EN ISO 12499 2008《工业风机 风机的机械安全性装置 护罩(ISO 12499-1999) 德文版本EN ISO 12499-2.pdf DIN EN ISO 12499-2010 Industrial fans - Mechanical safety of fans - Guarding (ISO 12499 1999) German version EN ISO 12499 2008《工业风机 风机的机械安全性装置 护罩(ISO 12499-1999) 德文版本EN ISO 12499-2.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1