FORD WSD-M2A146-A4-2003 ALUMINUM ALLOY BRIGHT ANODIZING QUALITY SHEET AND STRIP TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSD-M2A146-A1)《光亮阳极氧化处理级铝合金板材和带材 与标准FORD WSS-M99P11.pdf

上传人:explodesoak291 文档编号:749808 上传时间:2019-01-14 格式:PDF 页数:2 大小:57.76KB
下载 相关 举报
FORD WSD-M2A146-A4-2003 ALUMINUM ALLOY BRIGHT ANODIZING QUALITY SHEET AND STRIP  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSD-M2A146-A1)《光亮阳极氧化处理级铝合金板材和带材  与标准FORD WSS-M99P11.pdf_第1页
第1页 / 共2页
FORD WSD-M2A146-A4-2003 ALUMINUM ALLOY BRIGHT ANODIZING QUALITY SHEET AND STRIP  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSD-M2A146-A1)《光亮阳极氧化处理级铝合金板材和带材  与标准FORD WSS-M99P11.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2003 09 18 Revised Para 3.0 inserted; para 3.1, 3.6 and 4 deleted 1989 06 28 SM/ER5962TC Released K. Thurgood; J. Lines, EAO; J. A. Ferrari, NAAO Printed copies are uncontrolled Copyright 2003, Ford Global Technologies, Inc. Page 1 of 2 ALUMIN

2、IUM ALLOY, BRIGHT ANODISING QUALITY, WSD-M2A146-A1 SHEET AND STRIP WSD-M2A146-A2 WSD-M2A146-A3 WSD-M2A146-A4 1. SCOPE The materials defined by these specifications are aluminum-magnesium alloys, which achieve stated mechanical properties and performance criteria. 2. APPLICATION These materials were

3、released originally for bright anodized exterior and interior automotive trim. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CHEMICAL COMPOSITI

4、ON The chemical composition of any alloy specified on the engineering drawing shall conform to the requirements of SAE and/or Aluminum Association standards. 3.3 MECHANICAL PROPERTIES (ASTM B 557M) ALLOY TYPE ULTIMATE YIELD ELONGATION TENSILE STRENGTH (%) STRENGTH (MPa) (MPa) A1 275 min. 250 min. 2

5、min. A2 255 min. 240 min. 4 min. A3 230 min. 200 min. 7 min. A4 180 min. 145 min. 12 min. 3.4 COLOR AND BRIGHTNESS Components fabricated from these materials shall satisfy the requirements of the styling master, established for each part. ENGINEERING MATERIAL SPECIFICATIONWSD-M2A146-A1/A4Printed cop

6、ies are uncontrolled Copyright 2003, Ford Global Technologies, Inc. Page 2 of 2 3.5 PERFORMANCE All materials to this specification shall be suitable for bright anodizing to meet the performance specification specified on the engineering drawing. 5. GENERAL INFORMATION The information given below is

7、 provided for clarification and assistance in meeting the requirements of these specifications. 5.1 CHEMICAL COMPOSITION Magnesium contents usually range from 0.20 to 2.80%. The total percentage of all elements (except aluminum and magnesium) is unlikely to exceed 0.20. 5.2 APPROVED ALLOYS AND TEMPERS A1 A2 A3 A4 5250 H24 5252 H19 H171 H27 5351 H19 H24 5.3 ALLOY PURITY Higher purity alloys for improved appearance are available in WSD-M2A147-A1/A2

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1