FORD WSD-M2F186-A-2010 FABRIC VINYL COATED MULTI-PURPOSE TO BE USED WITH FORD WSS-M99P1111-A 《多用乙烯基涂层织物 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M2F186-A2]》.pdf

上传人:lawfemale396 文档编号:749904 上传时间:2019-01-14 格式:PDF 页数:4 大小:32.16KB
下载 相关 举报
FORD WSD-M2F186-A-2010 FABRIC VINYL COATED MULTI-PURPOSE  TO BE USED WITH FORD WSS-M99P1111-A  《多用乙烯基涂层织物  与标准FORD WSS-M99P1111-A一起使用  [使用 FORD WSS-M2F186-A2]》.pdf_第1页
第1页 / 共4页
FORD WSD-M2F186-A-2010 FABRIC VINYL COATED MULTI-PURPOSE  TO BE USED WITH FORD WSS-M99P1111-A  《多用乙烯基涂层织物  与标准FORD WSS-M99P1111-A一起使用  [使用 FORD WSS-M2F186-A2]》.pdf_第2页
第2页 / 共4页
FORD WSD-M2F186-A-2010 FABRIC VINYL COATED MULTI-PURPOSE  TO BE USED WITH FORD WSS-M99P1111-A  《多用乙烯基涂层织物  与标准FORD WSS-M99P1111-A一起使用  [使用 FORD WSS-M2F186-A2]》.pdf_第3页
第3页 / 共4页
FORD WSD-M2F186-A-2010 FABRIC VINYL COATED MULTI-PURPOSE  TO BE USED WITH FORD WSS-M99P1111-A  《多用乙烯基涂层织物  与标准FORD WSS-M99P1111-A一起使用  [使用 FORD WSS-M2F186-A2]》.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 02 17 N-STATUS Replaced by WSS-M2F186-A1/A2 M. Dumitrescu, NA2004 05 26 Revised Para 1. and 3 revised N. Komatsu 1993 11 12 C10351581 Released N. Komatsu Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1

2、 of 4 FABRIC, VINYL COATED, MULTI-PURPOSE WSD-M2F186-A FABRIC, VINYL COATED, MULTI-PURPOSE, TRILAMINATE WSD-M2F186-B FABRIC, VINYL COATED, MULTI-PURPOSE, TRILAMINATE WSD-M2F186-C FABRIC, VINYL COATED, MULTI-PURPOSE, TRILAMINATE WSD-M2F186-D NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined

3、 by these specifications is an expanded polyvinyl chloride copolymer film laminated to a knitted polyester fabric. In specifications WSD-M2F186-B/C/D, the vinyl coated fabric (WSD-M2F186-A) is flame laminated to polyether foam and a knitted backing scrim. 2. APPLICATION These specifications were rel

4、eased originally for material used in interior trim as a covering for commercial vehicle seat cushions and seat backs. 3. REQUIREMENTS In addition to the requirements listed herein, this material shall meet all requirements of the WSS-M8P3-D1/D2/D3, PERFORMANCE, FLEXIBLE POLYMERIC FILM, INTERIOR QUA

5、LITY material performance specification for commercial vehicle applications. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 REINFORCING FABRIC* 3.4.1 Compositio

6、n (ASTM D 276) Fabric Polyester, continuous filament Yarn Size 167 d tex 3.4.2 Construction of Finished Material, min (ASTM 3887) Wales/100 mm 164 Courses/100 mm 115 ENGINEERING MATERIAL SPECIFICATIONWSD-M2F186-A/B/C/D Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Pag

7、e 2 of 4 3.4.3 Weight 80 g/m2(ASTM D 751, Sample Method) 3.4.4 Breaking Strength (ASTM D 1682 GT, Test Speed 300 mm/min) WMD 200 N AMD 250 N *or engineering approved alternative. 3.5 VINYL COATED FABRIC 3.5.1 Weight, min (ASTM D 751, Sample Method) Vinyl Coating 630 g/m2Backing Fabric 80 g/m2Total 7

8、10 g/m23.5.2 Breaking Strength, min (ASTM D 751, GT, Grab method) WMD 350 N AMD 350 N 3.5.3 Tear Strength, min (ASTM D 1117, Integration Method) WMD 70 N AMD 120 N 3.5.4 Seam Strength, min (FLTM BN 119-01) WMD 350 N AMD 350 N 3.5.5 Stretch and Set, range (SAE J855) Stretch Set max WMD 15 - 40% 5% AM

9、D 30 - 75% 5% 3.5.6 Dimensional Stability, max (SAE J883, 15 minutes at 100 C) WMD 2.0% AMD 4.0% ENGINEERING MATERIAL SPECIFICATIONWSD-M2F186-A/B/C/D Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 4 3.5.7 Stiffness, max (ASTM D 747, direct reading at 60 Span

10、10 mm, Load 150 cmg) WMD 25 WMD 25 Note: Specimens to be tested with vinyl side down. 3.6 ADDITIONAL REQUIREMENTS FOR FLAME LAMINATED MATERIAL 3.6.1 Vinyl Coated Face Material As specified in clause 3.5. 3.6.2 Polyether Urethane foam As specified in WSD-M2D243-A2. 3.6.3 Backing Fabric As specified i

11、n WSD-M9H125-B2 or engineering approved alternative. 3.6.4 Total Weight, min (ASTM D 751 Sample Method) WSD-M2F172-B 800 g/m2WSD-M2F172-C 970 g/m2WSD-M2F172-D 910 g/m23.6.5 Thickness, range (ASTM D 3574) WSD-M2F172-B 2.0 - 3.5 mm WSD-M2F172-C 7.5 - 9.0 mm WSD-M2F172-D 5.5 - 7.0 mm 3.6.6 Adhesion, mi

12、n (FLTM BN 151-05) Face Fabric/Foam 15 N/50 mm Backing Fabric/Foam 10 N/50 mm ENGINEERING MATERIAL SPECIFICATIONWSD-M2F186-A/B/C/D Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 4 of 4 3.6.7 Crease Test, WMD and AMD Must pass Form C Test Method Apparatus The forms

13、 are moulded from clear acrylic sheeting as per fig.1. Form A has a radius r = 100 mm Form B has a radius r = 75 mm Form C has a radius r - 50 mm Form D has a radius r = 30 mm Procedure: Cut 3 test specimens, approximately 200 - 250 mm x 75 mm with the longer dimension parallel to the roll direction

14、 and also 3 specimens across the roll direction. It is important that both the original sample and the individual test specimens are not folded or creased prior to testing. Bend the test specimen, without undue tension or pressure around form A with the face side to the clear acrylic form. Inspect t

15、he specimen through the acrylic sheet for evidence of creasing or collapse of the laminate foam. If the specimen is acceptable on form A repeat the test on form B then C, or until evidence of creasing occurs. Report the identification letter of the test form with the smallest radius on which the majority of test specimens pass.

展开阅读全文
相关资源
猜你喜欢
  • EN ISO 17405-2014 en Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding rolling and explosion《无损检测 超声检验 对焊接 轧制和爆炸产生的覆层的测试技术(ISO 17405.pdf EN ISO 17405-2014 en Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding rolling and explosion《无损检测 超声检验 对焊接 轧制和爆炸产生的覆层的测试技术(ISO 17405.pdf
  • EN ISO 17409-2017 en Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements《电动道路车辆连接到外部电源的安全要求(ISO 17409 2015 修正版本2015-12-15)》.pdf EN ISO 17409-2017 en Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements《电动道路车辆连接到外部电源的安全要求(ISO 17409 2015 修正版本2015-12-15)》.pdf
  • EN ISO 17419-2018 en Intelligent transport systems - Cooperative systems - Globally unique identification.pdf EN ISO 17419-2018 en Intelligent transport systems - Cooperative systems - Globally unique identification.pdf
  • EN ISO 17423-2018 en Intelligent transport systems - Cooperative systems - Application requirements and objectives.pdf EN ISO 17423-2018 en Intelligent transport systems - Cooperative systems - Application requirements and objectives.pdf
  • EN ISO 17450-1-2011 en Geometrical product specifications (GPS) - General concepts - Part 1 Model for geometrical specification and verification《产品几何量技术规范(GPS) 一般概念 第1部分 几何规范和检定模型》.pdf EN ISO 17450-1-2011 en Geometrical product specifications (GPS) - General concepts - Part 1 Model for geometrical specification and verification《产品几何量技术规范(GPS) 一般概念 第1部分 几何规范和检定模型》.pdf
  • EN ISO 17450-2-2012 en Geometrical product specifications (GPS) - General concepts - Part 2 Basic tenets specifications operators uncertainties and ambiguities《几何产品规范(GPS) 一般概念 第2部.pdf EN ISO 17450-2-2012 en Geometrical product specifications (GPS) - General concepts - Part 2 Basic tenets specifications operators uncertainties and ambiguities《几何产品规范(GPS) 一般概念 第2部.pdf
  • EN ISO 17450-3-2016 en Geometrical product specifications (GPS) - General concepts - Part 3 Toleranced features《产品几何技术规范(GPS)的一般概念第3部分 公差特征(ISO 17450-3 2016)》.pdf EN ISO 17450-3-2016 en Geometrical product specifications (GPS) - General concepts - Part 3 Toleranced features《产品几何技术规范(GPS)的一般概念第3部分 公差特征(ISO 17450-3 2016)》.pdf
  • EN ISO 17450-4-2018 en Geometrical product specifications (GPS) - Basic concepts - Part 4 Geometrical characteristics for quantifying GPS deviations.pdf EN ISO 17450-4-2018 en Geometrical product specifications (GPS) - Basic concepts - Part 4 Geometrical characteristics for quantifying GPS deviations.pdf
  • EN ISO 17463-2014 en Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique《涂料和清漆 用.pdf EN ISO 17463-2014 en Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique《涂料和清漆 用.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1