FORD WSK-M2G354-A5-2014 ADHESIVES ANAEROBIC PRE-APPLIED THREADLOCKING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M2G354-A1).pdf

上传人:bowdiet140 文档编号:750445 上传时间:2019-01-14 格式:PDF 页数:4 大小:36.22KB
下载 相关 举报
FORD WSK-M2G354-A5-2014 ADHESIVES ANAEROBIC PRE-APPLIED THREADLOCKING  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSK-M2G354-A1).pdf_第1页
第1页 / 共4页
FORD WSK-M2G354-A5-2014 ADHESIVES ANAEROBIC PRE-APPLIED THREADLOCKING  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSK-M2G354-A1).pdf_第2页
第2页 / 共4页
FORD WSK-M2G354-A5-2014 ADHESIVES ANAEROBIC PRE-APPLIED THREADLOCKING  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSK-M2G354-A1).pdf_第3页
第3页 / 共4页
FORD WSK-M2G354-A5-2014 ADHESIVES ANAEROBIC PRE-APPLIED THREADLOCKING  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSK-M2G354-A1).pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2014 12 17 Revised Separated A8-9 L. Sinclair, NA 2003 01 24 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.8, 4 deleted 1990 08 01 EP00E0103153000 Released F.O. Swanson J.Schult Page 1 of 4 Copyright 201

2、4, Ford Global Technologies, Inc. ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING WSK-M2G354-A1/A7 1. SCOPE These products produce dry to the touch latex films containing anaerobic adhesive and encapsulated activator. Typically, the mixed product is applied in a band to fastener threads with automat

3、ed equipment, and the carrier is dried in 65 - 70 C ovens. The dry film remains inert until trapped and sheared in fastener threads during torquing. The encapsulated activator is released causing the anaerobic material to polymerize to a tough, thermoset plastic that locks and seals either straight

4、thread fasteners or tapered thread pipe fittings. 2. APPLICATION These specifications were originally released for industrial quality materials used to lock and seal parts. They may be used for fluid pressure resistance, to prevent loosening under shock and/or vibration, or to prevent leakage due to

5、 vibration. A1 Similar to A4 except lubricant added for torque/tension control. A2 A pre-applied dry to the touch encapsulated anaerobic adhesive, high strength for permanent fastener locking, 150 C continuous service temperature. A3 A pre-applied dry to the touch encapsulated anaerobic adhesive, hi

6、gh strength for permanent fastener locking, ideal for hot oil application, 200 C continuous use temperature. A4 A pre-applied dry to the touch encapsulated anaerobic adhesive, medium strength for general purpose use, similar to A2 in all other respects. A5 A pre-applied dry to the touch encapsulated

7、 anaerobic adhesive for threadlocking and threadsealing, low strength for easy fastener serviceability, 150 C continuous use temperature. A6 Similar to A2 except higher strength and for use with plated fasteners. A7 Similar to A4 except for use on plated fasteners. ENGINEERING MATERIAL SPECIFICATION

8、 WSK-M2G354-A1/A9 Page 2 of 4 Copyright 2014, Ford Global Technologies, Inc. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 VISCOSITY (ASTM D 10

9、84, Method B at 23 +3/- 2 C , determined without activator capsules) Type Brookfield Model Spindle RPM mPa.s WSK-M2G354- A1 RVF 5 2 45,000 - 85,000 A2 RVF 5 2 75,000 - 100,000 A3 RVF 5 2 75,000 - 100,000 A4 RVF 5 2 75,000 - 100,000 A5 RVF 5 2 75,000 - 100,000 A6 RVF 5 2 75,000 - 100,000 A7 RVT 6 2.5

10、 90,000 - 140,000 3.5 LOCKING TORQUE, min, N.m (FLTM BV 128-01, determined with activator capsules) After 72 h room temperature cure followed by 1 h at After 72 h room 150 +/- 2 C . Test at room Type temperature cure temperature. WSK-M2G354- A1 Break 31 37 Prevail 8 8 A2 Break 17 19 Prevail 11 11 EN

11、GINEERING MATERIAL SPECIFICATION WSK-M2G354-A1/A9 Page 3 of 4 Copyright 2014, Ford Global Technologies, Inc. A3 Break 19 19 Prevail 11 15 A4 Break 17 19 Prevail 11 11 A5 Break 11 7 Prevail 5 3 A6 Break 25 26 Prevail 25 26 A7* Break 8 5 Prevail 12 12 * Testing to be performed on zinc bichromate M10 n

12、uts and bolts. 3.6 QUALITY The material shall be a smooth homogeneous mixture, free from foreign materials and properties detrimental to normal production use. 3.7 PROCESS The coatings shall be applied as recommended by the approved supplier based on process and materials originally approved by the

13、Materials Engineering Department. Process sheet to be on file at the approving materials activity and at the adhesive applicator. 5. GENERAL INFORMATION The information below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 COLOR WSK-M2G354- A1 Bl

14、ue A7 Green A2 Yellow A3 Yellow A4 Green A5 Silver A6 Red ENGINEERING MATERIAL SPECIFICATION WSK-M2G354-A1/A9 Page 4 of 4 Copyright 2014, Ford Global Technologies, Inc. 5.2 FORD ENGINEERING MATERIAL SPECIFICATIONS - DOCUMENT CROSS-INDEX Specification Number Worldwide NAAO EAO WSK-M2G354- A1 - - A2 E

15、SE-M2G260-A1 - A3 ESE-M2G260-A2 - A4 ESE-M2G260-A3 - A5 ESE-M2G260-A4 - A6 ESE-M2G260-A5 - A7 ESK-M4G263-A3 5.3 SHELF LIFE (A1/A9) 12 months minimum from date of manufacture when stored in the original unopened container. Maintain in a cool, dry location at a temperature between 18 - 27 C . Do not return material to the original container.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1