FORD WSS-M1H1001-A-2008 FABRIC AVANETTE PATTERN WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《AVANETTE图案的非层压提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:twoload295 文档编号:751659 上传时间:2019-01-14 格式:PDF 页数:2 大小:18.50KB
下载 相关 举报
FORD WSS-M1H1001-A-2008 FABRIC AVANETTE PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《AVANETTE图案的非层压提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H1001-A-2008 FABRIC AVANETTE PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《AVANETTE图案的非层压提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 09 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2005 11 11 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, AVANETTE PATTERN, WOVEN JACQUARD, WSS-

2、M1H1001-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in CD340/345. 3. REQUIREMENTS In addition

3、to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2

4、 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 270 ends/10 cm Weft 170 picks/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance (FLTM BN 106-01) 430 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1001-APrinted copies are uncon

5、trolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 785-870 dtex f 144-188 (air texturized, PES, semi-dull) Weft 589-651 dtex f 129-159 (air texturized, semi-dull, round) 4237-4683 dtex f 594-726(air texturized, twisted, semi-dull, round) 646-71

6、4 dtex f 1 (mono fill, (bright, round) 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1