1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacements named D. Murtonen, NA 2006 01 05 Activated M. Dumitrescu Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, HIRISE PATTERN, KNIT WSS-M1H1012-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The mater
2、ial defined by this specification is a HIRISE PATTERN, 6 bars, 44 Gauge, double needle bar knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for U387 2007 MY, seat insert. 3. REQUIREMENTS I
3、n addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A
4、). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 98 wales/10 cm Courses 138 courses/ 10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Laminated * Face w/no Backcoat 547 g/m2 441 g/m2 * 3 mm foam thickness 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyest
5、er ENGINEERING MATERIAL SPECIFICATION WSS-M1H1012-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 31% 16.7 tex f36 (text polyester) x 1 Middle 19% 16.7 tex f36 (text polyester) x1 11% 3.3 tex f1 Monofilament Back 12% 11.1 tex f34 (text polyester) x 1 27% 11.1 tex f34 (text polyester) x1 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, Heat Set, Setmake, Dye, Tenter dry, Inspect
