1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 12 13 Activated M. Montgomery Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ALTO, WARP KNIT FABRIC, WSS-M1H1050-A UNLAMINATED 1. SCOPE The material defined by this specification is a 3 b
2、ar 28 gauge warp knitted velour type polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of
3、WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Wale
4、s 144/10 cm Courses 230/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 319 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Face dtex 105f48 ( polyester, flat ) Back dtex 76f24 ( polyester, flat) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1050-A
5、Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING piece dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
