1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 01 19 Activated M. Montgomery Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2 FABRIC, TRUDIE NEW 4, WOVEN JACQUARD, UNLAMINATED WSS M1H1053-A 1. SCOPE The material defined by this specification is
2、 a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/
3、A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 285 ends/10 cm Wef
4、t 195 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 215 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 420 dtex f 136, Semi-Dull Round AJT Weft 380 dtex f 98, Semi-Dull Round False Twist ENGINEERING MATERIAL SPECIFICATIONWSS M1H1
5、053-A Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Piece Dyed 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
