FORD WSS-M1H1062-A-2009 FABRIC WEBB PATTERN CIRCULAR KNITTED FABRIC UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《WEBB图案的不分层圆形针织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:jobexamine331 文档编号:751755 上传时间:2019-01-14 格式:PDF 页数:2 大小:25.31KB
下载 相关 举报
FORD WSS-M1H1062-A-2009 FABRIC WEBB PATTERN CIRCULAR KNITTED FABRIC UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《WEBB图案的不分层圆形针织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H1062-A-2009 FABRIC WEBB PATTERN CIRCULAR KNITTED FABRIC UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《WEBB图案的不分层圆形针织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 01 22 Activated M. Montgomery, FOE Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 2 FABRIC, WEBB PATTERN, CIRCULAR KNITTED FABRIC, WSS-M1H1062-A UNLAMINATED 1. SCOPE The material defined by this sp

2、ecification is a Jacquard Circular Knitted polyester face fabric. 2. APPLICATION WSS-M1H1062-A has been introduced as an interior trim fabric for use in the B299 China Model, as a seat insert. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WS

3、S-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 8% tolerance (ASTM D 3775) Wales 1

4、18 /10 cm Courses 106 /10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) 552 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Weft dtex 300f96, (Draw Textured semi dull polyester ) Weft dtex 300f96, (Air Textured semi dull CD polyester ) ENGINEERI

5、NG MATERIAL SPECIFICATIONWSS-M1H1062-APrinted copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Piece Dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS - Piece dyeing - Resining - Setting - Back Coating - Setting Or as approved

6、by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1