1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2012 04 04 Activated M. Montgomery, EU Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 2 FABRIC, LANE PATTERN, WOVEN JACQUARD, WSS-M1H1068-A UNLAMINATED 1. SCOPE The material defined by this spec
2、ification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the V36x 2013 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WS
3、S-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10 % tolerance (ASTM D3775) Warp 2
4、30 ends/10 cm Weft 135 picks/10 cm 3.2.2 Fabric Weight, +/- 10 % tolerance (FLTM BN 106-01) 325 g/m2 3.3 COMPOSITION (ASTM D629) Fabric 100 % polyester 3.4 YARN CONSTRUCTION (ASTM D1244) Warp 830dtex f 188 (Air jet textured) Weft 830dtex f 188 (Air jet textured) ENGINEERING MATERIAL SPECIFICATION WS
5、S-M1H1068-A Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS -Washing, drying, heat set As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clar
6、ification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global cross car line strategies to use Tri-laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction for Composition & Yarn Construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4.
