1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 16 N-STATUS Replaced by WSS-M1H1098-A V. Demarchi, FSAO 2006 12 13 Activated L. Neves Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, GLASGOW MIDNIGHT BLACK PATTERN, WOVEN JACQUARD WSS-
2、M1H1104-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for seats application. 3. REQUIREMENTS In addition to the requireme
3、nts listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUC
4、TION 3.2.1 Fabric Count, range (ASTM D 3775) Warp 1 - 33 yarn/cm Fill 0 - 22 yarn/cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Seat (laminated to 4 mm foam + backing fabric) 94 - 564 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam Seat UR/Polyether D26 Backing Fabric 100% Polyamide 45
5、g/m ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1104-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 598 dtex, Semi Dull, Round, Air Textured Polyester Fill 598 dtex, Semi Dull, Round, Air Textured Polyester 3.5 METHOD
6、 OF DYEING Warp Yarn Dyed Fill Yarn Dyed and Solution Dyed 3.6 FINISHING OPERATIONS Heat Set 3.7 THICKNESS, mm, range (ASTM D 1777) Seat (laminated to 4 mm foam + backing fabric) = 5.0 mm 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, %, range (SAE J855) Seat Warp 3.0 9.0% Fill 2.0 8.0% 3.8 FLAMMABILITY
7、 (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
