1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 08 31 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ELSWOOD PATTERN, FLAT WOVEN WSS-M1H1109-A 1. SCOPE The material defined by this specification is a ELSWOOD pat
2、tern, flat Jacquard woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric, bolster application for 2009 D471. 3. REQUIREMENTS Material specification requirements are to be used f
3、or initial qualification of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production
4、Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 279 ends/10 cm Fill 189 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 242 g/m23.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4.
5、 Fabric 100% Polyester Backcoating Acrylic latex ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1109-A Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f96 (textured semi-dull polyester) x 2 16.7 tex f100 (textured semi-dull polyester) x 2 Fill 16.7 tex f100 (textured, semi-dull polyester) x 3 16.7 tex f96 (textured, semi-dull polyester) x 2 3.5 METHOD OF DYEING piece dye/solution dye 3.6 FINISHING OPERATIONS woven, wash, dye, backcoat, brush