1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 17 N-STATUS V. Demarchi, FSAO 2007 08 22 Activated L. Neves Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ILLUSION PETIT MIDNIGHT BLACK PATTERN, FLAT WSS-M1H1115-A CIRCULAR KNIT NOT T
2、O BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a flat knit polyester fabric. 2. APPLICATION This specification was released originally for material used as a door trim panel fabric. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet
3、all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, range (ASTM D 37
4、75) Wales/Warp 0 - 12 wales/cm Courses/Fill 16 - 18 courses/cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Door Panel (laminated to 7.3 mm foam) 419 - 535 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam Door Panel PUR/Polyester D28 ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1115-A Printed
5、copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Fill 200 and 250 dtex, Semi Dull, Round, False Twist Polyester 3.5 METHOD OF DYEING Fill Yarn Dyed and Solution Dyed 3.6 FINISHING OPERATIONS Heat Set 3.7 THICKNESS, mm, range (ASTM
6、D 1777) Door Panel (laminated to 7.3 mm foam) 6.5 - 7.7 mm 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, %, range (SAE J855) Door Panel Warp 20 30% Fill 50 60% 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
