1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 0 2010 05 13 Activated M. Dumitrescu, NA Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DARK CARA PATTERN, KNIT WSS-M1H1141-A2 1. SCOPE The material defined by this specification is DARK
2、CARA PATTERN, 4 bars, 28 Gauge, TRICOT knit, body cloth of good quality and uniform composition. The fabric is dark color printed for a special pattern. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2011 U502 seat insert. 3. REQUIREMENTS I
3、n addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A
4、). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 133 wales/10 cm Courses 196 courses/10 cm 3.2.2 Fabric Weight, range, g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 456 - 504 370 - 335 * 3 mm foam thickness 3.3 COMPOSITION (ASTM D 629) Tolerance as specified
5、 in WSS-M8P18-A1/A4 Fabric 100% Polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1141-A2 Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 13.3 tex( natural polyester) (B) 7.78 tex( natural polyester) Middle 7.78
6、tex (natural polyester) Back 7.78 tex (natural polyester) 3.5 METHOD OF DYEING Piece Dye, Printed pattern 3.6 FINISHING OPERATIONS Wash, preset, dye, set, print, set, inspect 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
