1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 1 2014 08 29 Editorial Corrected spec number, removed an extra 1 L. Sinclair, NA 2014 07 02 Released M. Montgomery, EU Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MATERIAL PEARL PATTER
2、N, DOBBY WOVEN, WSS-M1H1178-A1 UNLAMINATED 1. SCOPE The material defined by this specification is a woven dobby polyester face fabric 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the C344 MCA 2015.75MY 3. REQUIREMENTS In addition t
3、o the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2
4、FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 260 ends/10 cm Weft 180 picks/10 cm 3.2.2 Fabric Weight, +/-10% tolerance (FLTM BN 106-01) 350 g/m2 390 g/m2 (with coating) 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester Back coating acrylic 3.4 YARN CONSTRUCTION (ASTM
5、 D 1244) Warp 370/96 Dtex Friction textured yarn PES. 1150/288 Dtex Friction textured yarn PES Weft 370/96 Dtex Friction textured yarn PES 1150/288 Dtex friction textured yarn PES ENGINEERING MATERIAL SPECIFICATION WSS-M1H1178-A1 Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD O
6、F DYEING Dope dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS washing; stenter frame, acrylic Back-coated or as approved By Materials Engineering4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this sp
7、ecification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and Yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. Fabric must be approved by Design to the original master. 4.3 Global strategy for this fabric is to use Tri-Laminate / foam & scrim construction in all regions.
