FORD WSS-M1H1283-A13-2017 FABRIC SAVILLE PATTERN FLAT WOVEN 100% VIRGIN WITH SOIL REPELLANT AND BACKCOATING TO BE USED WITH FORD WSS-M99P1111-A .pdf

上传人:unhappyhay135 文档编号:751991 上传时间:2019-01-14 格式:PDF 页数:3 大小:52.86KB
下载 相关 举报
FORD WSS-M1H1283-A13-2017 FABRIC SAVILLE PATTERN FLAT WOVEN 100% VIRGIN WITH SOIL REPELLANT AND BACKCOATING  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第1页
第1页 / 共3页
FORD WSS-M1H1283-A13-2017 FABRIC SAVILLE PATTERN FLAT WOVEN 100% VIRGIN WITH SOIL REPELLANT AND BACKCOATING  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第2页
第2页 / 共3页
FORD WSS-M1H1283-A13-2017 FABRIC SAVILLE PATTERN FLAT WOVEN 100% VIRGIN WITH SOIL REPELLANT AND BACKCOATING  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2017 01 11 Released L. Wang, APA Controlled document at www.MATS Copyright 2017, Ford Global Technologies, LLC Page 1 of 3 FABRIC, SAVILLE PATTERN, FLAT WOVEN, 100% VIRGIN WITH SOIL REPELLANT AND BACKCOATING WSS-M1H1283-A13 1. SCOPE Th

2、e material defined by this specification is a flat woven polyester face fabric made from 100% virgin yarn. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for Ranger MY2018 seat insert. The fabric was originally approved as tri-laminated with fo

3、am and a backing scrim. 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification requires the use of approved sources. Only the sources identified on the Ford Approved Source List (ASL) can be used when this specification is listed on the drawing, CAD file, or other documents. The list of approved so

4、urces is located within Ford at or available externally through a Ford Materials Engineer. 3.2 APPEARANCE The color, pattern, and finish shall match the approved Corporate Design master sample. 3.3 FABRIC PERFORMANCE In addition to the requirements listed herein, the fabric shall meet all requireme

5、nts of WSS-M8P18-B1/B2/B3/B4 latest. 3.4 VEHICLE INTERIOR ENVIRONMENTAL PERFORMANCE Materials used in interior applications must meet the requirements outlined in WSS-M99P2222-D1/latest, Performance, Vehicle Interior Environmental Quality Material/Component Requirements. Data must be included in mat

6、erial submission package. 3.5 CONDITIONING AND TEST CONDITIONS All test values are based on material conditioned for not less than 24 h prior to testing in a controlled environment of 23 +/- 2 C and 50 +/- 5% relative humidity. Testing of the material should occur in the conditioning environment or

7、soon after removal. 3.6 FABRIC CONSTRUCTION 3.6.1 Fabric Count, -/+ 10 % tolerance (ASTM D3775) Warp 490 / 10 cm Fill 235 / 10 cm ENGINEERING MATERIAL SPECIFICATION WSS-M1H1283-A13 Copyright 2017, Ford Global Technologies, LLC Page 2 of 3 3.6.2 Fabric Weight, -/+10 % tolerance (FLTM BN 106-01) Face

8、Fabric 399 g/m2 Back Coating 60 g/m2 Total Weight 459 g/m2 3.7 COMPOSITION (ASTM D629) Fabric 100% polyester Back Coating Urethane 3.8 YARN CONSTRUCTION (ASTM D1244) Warp 330 Dtex f 60 (Polyester, False Twist Texturized) Weft (A) 330 Dtex f 72 (Polyester, False Twist Texturized) Weft (B) 660 Dtex f

9、144 (Polyester, False Twist Texturized) Weft (C) 990 Dtex f 216 (Polyester, False Twist Texturized) 3.9 METHOD OF DYEING Yarn dyed 3.10 FINISHED OPERATIONS Framing, Finish with Soil Repellent coating, Back coating, Drying 4. GENERAL INFORMATION The information given below is provided for clarificati

10、on and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only

11、. Each regional location of the supplier for this specification must provide a construction package and be approved to meet this specification. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and yarn construction. The fabric must also meet the requirements of

12、WSS-M8P18-B1/B2/ B3/B4/Latest. 4.3 Global strategy for this fabric is to use tri-laminate/foam & scrim construction in all regions. 4.4 APPROVAL OF MATERIALS Suppliers desiring approval of their materials shall first obtain an expression of interest from Purchasing, Design or Product Development, an

13、d Materials Engineering. The supplier shall submit a completed copy of their laboratory test reports, signed by a qualified and authorized representative ENGINEERING MATERIAL SPECIFICATION WSS-M1H1283-A13 Copyright 2017, Ford Global Technologies, LLC Page 3 of 3 of the test facility, demonstrating f

14、ull compliance with all the requirements of the Material Specification. Tested material samples must be available for review upon request and kept for a minimum of one year. Upon request, the supplier will review the associated quality control documents (Process Failure Mode and Effects Analysis, Co

15、ntrol Plans, Certification testing) with Ford. 4.5 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any changes to the material originally approved, whether or not such changes affect

16、the materials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Purchasing, and Materials Engineering activities of the proposed changes (with reasons) by submission of a completed Suppliers Request for Engineering Approval, S

17、REA. For parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verification (DV), Production Verification (PV) and Production Part Approval Process (PPAP) sign off must be kept until Job 1. 4.6 RESTRICTED SUBSTANCE MANAGEMENT STANDAR

18、D Substance restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions are identified in the Restricted Substance Management Standard WSS-M99P9999-A1 which is updated yearly. It is the suppliers responsibility to comply with this standard on a continuing basis. 5. SUMMARY OF REVISIONS

展开阅读全文
相关资源
猜你喜欢
  • BS EN 61922-2003 High-frequency induction heating installations - Test methods for the determination of power output of the generator《高频感应加热装置 测定发生器功率输出的试验方法》.pdf BS EN 61922-2003 High-frequency induction heating installations - Test methods for the determination of power output of the generator《高频感应加热装置 测定发生器功率输出的试验方法》.pdf
  • BS EN 61924-2-2013 Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Modular structure for INS Operational and performance requirements.pdf BS EN 61924-2-2013 Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Modular structure for INS Operational and performance requirements.pdf
  • BS EN 61924-2006 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements methods of testing and .pdf BS EN 61924-2006 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements methods of testing and .pdf
  • BS EN 61925-2006 Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server《多媒体系统和设备 多媒体家用服务系统 家用服务词汇》.pdf BS EN 61925-2006 Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server《多媒体系统和设备 多媒体家用服务系统 家用服务词汇》.pdf
  • BS EN 61926-1-2001 Design automation - Standard test language for all systems - Common abbreviated test language for all systems (C ATLAS)《设计自动化 所有系统的标准试验语言 所有系统的通用缩写试验语言》.pdf BS EN 61926-1-2001 Design automation - Standard test language for all systems - Common abbreviated test language for all systems (C ATLAS)《设计自动化 所有系统的标准试验语言 所有系统的通用缩写试验语言》.pdf
  • BS EN 61935-1-2009 Specification for the testing of balanced and coaxial information technology cabling - Installed balanced cabling as specified in the standards series EN 50173《平.pdf BS EN 61935-1-2009 Specification for the testing of balanced and coaxial information technology cabling - Installed balanced cabling as specified in the standards series EN 50173《平.pdf
  • BS EN 61935-2-20-2009 Testing of balanced communication cabling in accordance with series EN 50173 Patch cords and work area cords - Blank detail specification for class D applicat.pdf BS EN 61935-2-20-2009 Testing of balanced communication cabling in accordance with series EN 50173 Patch cords and work area cords - Blank detail specification for class D applicat.pdf
  • BS EN 61935-2-2010 Specification for the testing nof balanced and coaxial ninformation technology cabling  nPart 2 Cords as specified in ISO IEC 11801 nand related standards《对称和同轴通.pdf BS EN 61935-2-2010 Specification for the testing nof balanced and coaxial ninformation technology cabling nPart 2 Cords as specified in ISO IEC 11801 nand related standards《对称和同轴通.pdf
  • BS EN 61935-3-2009 Testing of balanced and coaxial information technology cabling - Installed cabling as specified in EN 50173-4 and related standards《平衡和同轴信息技术布线的测试 EN 50173-4及其相关.pdf BS EN 61935-3-2009 Testing of balanced and coaxial information technology cabling - Installed cabling as specified in EN 50173-4 and related standards《平衡和同轴信息技术布线的测试 EN 50173-4及其相关.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1