FORD WSS-M1H695-G-2008 FABRIC AVON III PATTERN KNITTED HFW - TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M1H695-A)《AVON III图案的HFW针织织物 与标准FORD WSS-M99P1111-A一起使用 列于标准.pdf

上传人:feelhesitate105 文档编号:752083 上传时间:2019-01-14 格式:PDF 页数:5 大小:28.19KB
下载 相关 举报
FORD WSS-M1H695-G-2008 FABRIC AVON III PATTERN KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H695-A)《AVON III图案的HFW针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第1页
第1页 / 共5页
FORD WSS-M1H695-G-2008 FABRIC AVON III PATTERN KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H695-A)《AVON III图案的HFW针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第2页
第2页 / 共5页
FORD WSS-M1H695-G-2008 FABRIC AVON III PATTERN KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H695-A)《AVON III图案的HFW针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第3页
第3页 / 共5页
FORD WSS-M1H695-G-2008 FABRIC AVON III PATTERN KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H695-A)《AVON III图案的HFW针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第4页
第4页 / 共5页
FORD WSS-M1H695-G-2008 FABRIC AVON III PATTERN KNITTED HFW -  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSS-M1H695-A)《AVON III图案的HFW针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 11 20 N-STATUS No Replacement L. Schmalz, FNA / M. Montogomery, FOE 2003 03 28 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.18, 3.19, 4 deleted 1996 04 22 Activated N. Komatsu Printed copies are un

2、controlled Page 1 of 5 Copyright 2008, Ford Global Technologies, Inc. FABRIC, AVON III PATTERN, KNITTED, UNLAMINATED WSS-M1H695-A FABRIC, AVON III PATTERN, KNITTED, 3 mm WSS-M1H695-B1 FABRIC, AVON III PATTERN, KNITTED, 6 mm WSS-M1H695-B2 FABRIC, AVON III PATTERN, KNITTED, 3 mm WSS-M1H695-C1 FABRIC,

3、AVON III PATTERN, KNITTED, 6 mm WSS-M1H695-C2 FABRIC, AVON III PATTERN, KNITTED, HFW WSS-M1H695-G FABRIC, AVON III PATTERN, KNITTED, HFW WSS-M1H695-H FABRIC, AVON III PATTERN, KNITTED, HFW WSS-M1H695-J FABRIC, AVON III PATTERN, KNITTED, HFW WSS-M1H695-K NOT TO BE USED FOR NEW DESIGN 1. SCOPE The mat

4、erial defined by these specifications is a 3 bar 28 gauge, warp knitted, simulated velour, polyester bodycloth. 2. APPLICATION WSS-M1H695-A is used for molded headrests and also adhesive coated for use on inner door panels. WSS-M1H695-B1, B2, C1, C2, are used for seat wearing surfaces. WSS-M1H695-G,

5、 H, J, K are used for inner door and quarter trim panels and/or as specified on Engineering Drawings. AVON III PATTERN WSS-M1H695-A Unlaminated WSS-M1H695-B1 3.0 mm, flame laminated to polyether foam and knitted fabric WSS-M1H695-B2 6.0 mm, flame laminated to polyether foam and knitted fabric WSS-M1

6、H695-C1 3.0 mm, flame laminated to polyester foam and knitted fabric (EAO use only) WSS-M1H695-C2 6.0 mm, flame laminated to polyester foam and knitted fabric (EAO use only) WSS-M1H695-G HF-weldable vinyl film, adhesive bonded, or an engineering approved alternative ENGINEERING MATERIAL SPECIFICATIO

7、N WSS-M1H695-A/B1/B2/C1/C2/G/H/J/K Page 2 of 5 Copyright 2008, Ford Global Technologies, Inc. WSS-M1H695-H HF-weldable acrylic backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative WSS-M1H695-J HF-weldable vinyl backcoating applied by the doctor-knife sp

8、reading technique, or an engineering approved alternative WSS-M1H695-K HF-weldable polyurethane backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative 3. REQUIREMENTS In addition to the requirements listed herein, the fabric or laminate shall meet all req

9、uirements of WSB-M8P1-I. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3887) Wales 145 wales/

10、10 cm Courses 240 courses/10 cm 3.4.2 Fabric Weight, g/m2, range 305 - 375 (FLTM BN 106-01) (340 average) 3.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester 3.6 YARN CONSTRUCTION (ASTM D 1244) Pile 76 dtex f24, (polyester, semi-dul) Back 76 dtex f24, (polyester, semi-dul) 3.7 METHOD OF DYEING Piece

11、 dyed or as approved by Materials Enginering ENGINEERING MATERIAL SPECIFICATION WSS-M1H695-A/B1/B2/C1/C2/G/H/J/K Page 3 of 5 Copyright 2008, Ford Global Technologies, Inc. 3.8 FINISHING OPERATIONS As approved by Materials Engineering 3.9 REQUIREMENTS FOR POLYESTER FOAM As specified in WSD-M2D43-A4 3

12、10 REQUIREMENTS FOR POLYETHER FOAM As specified in WSD-M2D43-A2 3.11 REQUIREMENTS FOR THE BACKING As pecifed inWSD-M9H125-B2 or an Engineering approved alternative 3.12 REQUIREMENTS FOR THE FLAME LAMINATED MATERIAL (WSS-M1H695-B1, B2, C1, C2) 3.12.1 Thickness, range (ASTM D 1777, circular presser f

13、oot area 645 mm2, 2.8 g force, 43 Pa pressure) WSS-M1H695-B1 3.0 +/- 1.0 mm WSS-M1H695-B2 6.0 +/- 1.0 mmWSS-M1H695-C1 3.0 +/- 1.0 mm WSS-M1H695-C2 6.0 +/- 1.0 mm3.12.2 Weight, range (FLTM BN 106-01) WSS-M1H695-B1 510 +/- 40 g/m2WSS-M1H695-B2 610 +/- 40 g/m2WSS-M1H695-C1 480 +/- 40 g/m2WSS-M1H695-C2

14、570 +/- 40 g/m23.12.3 Stretch and Set, %, range (SAE J855) Stretch (WSS-M1H695-B1, B2, C1, C2) Wales 15 +/- 10 Cour 2Set (WSS-M1H695-B1, B2, C1, C2) Wales 0 -5 %Cour 0ENGINEERING MATERIAL SPECIFICATION WSS-M1H695-A/B1/B2/C1/C2/G/H/J/K Page 4 of 5 Copyright 2008, Ford Global Technologies, Inc. 3.13 R

15、EQUIREMENTS FOR THE BACKCOATED MATERIAL (WSS-M1H695-G) 3.13.1 Weight, min (FLTM BN 106-01) PVC Film 100 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative. 3.14 REQUIREMENTS FOR BACKCOATED MATERIAL (WSS-M1H695-H) 3.14.1 Weight, min (FLTM BN 106-01) Acrylic Backc

16、oating 35 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative. 3.15 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSS-M1H695-J) 3.15.1 Weight, min (FLTM BN 106-01) PVC Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alterna

17、tive. 3.16 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSS-M1H695-K) 3.16.1 Weight, min (FLTM BN 106-01) Polyurethane Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative. ENGINEERING MATERIAL SPECIFICATION WSS-M1H695-A/B1/B2/C1/C2/G/H/J/K Page 5 of 5

18、 Copyright 2008, Ford Global Technologies, Inc. 3.17 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 Purchase departments will ensure that both materials defined in these specifications and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • EN 14074-2004 en Office furniture - Tables and desks and storage furniture - Test methods for the determination of strength and durability of moving parts《办公家具 办公桌及贮存柜 移动部件的强度和耐久性测.pdf EN 14074-2004 en Office furniture - Tables and desks and storage furniture - Test methods for the determination of strength and durability of moving parts《办公家具 办公桌及贮存柜 移动部件的强度和耐久性测.pdf
  • EN 14076-2013 en Timber stairs - Terminology《木质楼梯 术语》.pdf EN 14076-2013 en Timber stairs - Terminology《木质楼梯 术语》.pdf
  • EN 14078-2003 en Liquid petroleum products Determination of fatty acid methyl esters (FAME) in middle distillates Infrared spectroscopy method《液化石油产品中间馏份中脂肪酸甲基酯(FAME)的测定红外光谱法》.pdf EN 14078-2003 en Liquid petroleum products Determination of fatty acid methyl esters (FAME) in middle distillates Infrared spectroscopy method《液化石油产品中间馏份中脂肪酸甲基酯(FAME)的测定红外光谱法》.pdf
  • EN 14079-2003 en Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze《非放射性的医疗装置 脱脂纱布 脱脂棉和脱胶纱布的性能.pdf EN 14079-2003 en Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze《非放射性的医疗装置 脱脂纱布 脱脂棉和脱胶纱布的性能.pdf
  • EN 1408-2008 en Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)《饮用水处理用化学试剂 聚二烯丙基二甲基胺盐酸盐》.pdf EN 1408-2008 en Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)《饮用水处理用化学试剂 聚二烯丙基二甲基胺盐酸盐》.pdf
  • EN 14080-2013 en Timber structures - Glued laminated timber and glued solid timber - Requirements《木质结构 胶合分层木质品及胶合固体木质 要求》.pdf EN 14080-2013 en Timber structures - Glued laminated timber and glued solid timber - Requirements《木质结构 胶合分层木质品及胶合固体木质 要求》.pdf
  • EN 14081-1-2016 en Timber structures - Strength graded structural timber with rectangular cross section - Part 1 General requirements《木材结构 矩形截面的强度等级结构木材 第1部分 要求》.pdf EN 14081-1-2016 en Timber structures - Strength graded structural timber with rectangular cross section - Part 1 General requirements《木材结构 矩形截面的强度等级结构木材 第1部分 要求》.pdf
  • EN 14081-2-2010 en Timber structures - Strength graded structural timber with rectangular cross section - Part 2 Machine grading additional requirements for initial type testing (I.pdf EN 14081-2-2010 en Timber structures - Strength graded structural timber with rectangular cross section - Part 2 Machine grading additional requirements for initial type testing (I.pdf
  • EN 14081-3-2012 en Timber structures - Strength graded structural timber with rectangular cross section - Part 3 Machine grading additional requirements for factory production cont.pdf EN 14081-3-2012 en Timber structures - Strength graded structural timber with rectangular cross section - Part 3 Machine grading additional requirements for factory production cont.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1