FORD WSS-M1H707-B-2003 FABRIC ELLIS II PATTERN WOVEN TO BE USED WITH FORD WSS-M99P1111-A 《ELLIS II图案的机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:周芸 文档编号:752130 上传时间:2019-01-14 格式:PDF 页数:2 大小:58.66KB
下载 相关 举报
FORD WSS-M1H707-B-2003 FABRIC ELLIS II PATTERN WOVEN  TO BE USED WITH FORD WSS-M99P1111-A  《ELLIS II图案的机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H707-B-2003 FABRIC ELLIS II PATTERN WOVEN  TO BE USED WITH FORD WSS-M99P1111-A  《ELLIS II图案的机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 03 18 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.10,3.11, 4 deleted 1999 05 07 Activated L. Daniv-Zarewych Printed copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, In

2、c. FABRIC, ELLIS II PATTERN, WOVEN WSS-M1H707-B 1. SCOPE The material defined by this specification is a flat woven textured body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim seat fabric for the Ranger

3、Sport Bolster. The fabric is not backcoated, but laminated 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to

4、 the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 16.5 ends/10 cm Fill 13.7 picks/10 cm 3.4.2 Fabric Weight, range 440 - 472 g/m2(FLTM BN 106-01) 3.5 COMPOSITION (ASTM D 629) Tolerance as sp

5、ecified in WSS-M8P18-A1/A4 Fabric 100 % Polyester Backcoating None ENGINEERING MATERIAL SPECIFICATION WSS-M1H707-B Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 118.1 tex (100 % semi-dul polyester,2.5 dtex) 2 ply Fill 118.1 tex (100 % semi-dul po

6、lyester,2.5 dtex) 2 ply 3.7 METHOD OF DYEING Package Dye 3.8 FINISHING OPERATIONS Heatset, Inspect 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1