1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 17 N-STATUS No Replacement B. Haggart, FNA 2003 02 19 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.9, 3.10, 4 deleted 1998 03 16 Activated L. Daniv-Zarewych Printed copies are uncontrolled Page
2、1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, LADDERS PATTERN, WOVEN WSS-M1H776-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a Jacquard pattern flat woven bodycloth of good quality and uniform composition. 2. APPLICATION This specification wa
3、s released originally for material used as an interior trim fabric for the U204. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. Material specification requirements are to be used for initial qualification of materials. 3.0 S
4、TANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 126.0 ends/10 cm Fill 150 picks/10 cm 3.4
5、.2 Fabric Weight, range 429.1 - 520.3 g/m2(FLTM BN 106-01) 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100 % polyester Backcoating 41.4 g/m2acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H776-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.6 YARN C
6、ONSTRUCTION (ASTM D 1244) Warp 118.1 tex (polyester, 2.5 dtex, 51 mm staple) 2ply S 393.7 tpm Fill 74.1 tex, (air textured polyester, 3.37 dtex, 198 filaments) ingleply 100 tex, (air textured polyester, 4.41 dtex, 204 filaments) 3plyair entangled 3.7 METHOD OF DYEING Yarn dye, package dye 3.8 FINISHING OPERATIONS Heat set, lamination
